Máy hàn thiếc Weller WXA2 – Weller Soldering WXA2
Downloads
Product features
- For operation with external compressed air
- Compatible with all WX series tools
- When using WXHAP200 hot air pen, only WXMP-MS or WXMP series tools can be used at the same time
- Benchtop controller for WHP1000/WHP3000 heating plates
- Benchtop controller for use as Zero Smog 4V/6V filter unit
- Air flow: 0 – 20 l/min
- Required compressed air supply: 400 – 600 kPA (58 – 87 psi); oil-free, dry compressed air
Technical data
| Dimensions L x W x H | 6.6 x 5.9 x 5.1 in |
| Air Consumption | 20 l/min |
| Automatic Tool Identification | Yes |
| Benchtop Controller | Yes |
| Capacity (l/min) | 20 l/min |
| Compressed Air Connection (Outer Diameter) | 0.23 in |
| Compressed Air Connection Accessory | Oil free, dry compressed air |
| Equipotential Bonding | Yes |
| Equipotential Bonding Socket | Via 3.5mm Pawl Socket on Back of Device |
| ESD Safe | Yes |
| Fuse | T2A |
| Hot Air (picto) | Yes |
| Interface | 1x USB, 2x RS232, 1x Switching Output |
| Maximum Hot Air Flow Rate l/min (Depends on Tool) | 15 l/min |
| Multilingual Display | Yes |
| Number of Channels | 2 |
| Operating Pressure | 4 – 6 bar 54 – 87 psi |
| Power | 200 W (255 W) |
| Temperature Accuracy °C | ± 9 °C |
| Temperature Accuracy °F | ± 17 °F |
| Temperature Accuracy for Hot Air | ± 54 °F |
| Temperature Range °C | 100 – 550 °C |
| Temperature Range °F | 200 – 999 °F |
| Temperature Stability °C | ±2 °C |
| Temperature Stability °F | ±4 °F |
| Tip Type | WX |
| Traceability | Yes |
| UPC | 037103312389 |
| USB | USB interface of firmware updates, parameterization and monitoring USB interface supports all standard USB flash drive types |
| Vacuum | 0.6 bar (60 kPA) (8.7 psi) |
| Voltage | 120 V |
