Download
Cross KQ2TW Outline Drawing And Dimensions
Cross KQ2TW outline drawing
(Units: mm)
Applicable Tubing Outer Diameter mm |
Model | øD | Release Button Dimensions |
L | Q | M | øO | øN | Effective area (mm2) | Minimum hole diameter | Weight g |
||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
X | Y | Nylon | Urethane | ||||||||||
ø4 | KQ2TW04-00A1 | 8.2 | 7.7 | 10 | 15.3 | 5.7 | 13.3 | 6 | 3.2 | 6.4 | 4.4 | 3 | 3.5 |
ø6 | KQ2TW06-00A1 | 10.4 | 9.7 | 12 | 16.3 | 6.8 | 13.3 | 6 | 3.2 | 13.4 | 10.6 | 4.5 | 4.9 |
One-Touch Fitting KQ2 Series (Metric Size) Common Specifications (Reference)
Structure
One-Touch Fitting KQ2 Series (Metric Size) Structural Drawing
Applicable Tubing
Tube materials | FEP, PFA, nylon, soft nylon, polyurethane |
---|---|
Tube outer diameter | ø3.2, ø4, ø6 |
Specifications
Usable fluids | Air, water Note 1: | |
---|---|---|
Operating pressure range Note 2: | -100 kPa to 1 MPa | |
Guaranteed proof pressure (at 23°C) | 3 MPa | |
Ambient temperature and fluid temperature | -5 to 60°C, For water: 0 to 40°C (no freezing) | |
Thread | Mounting section | JIS B0203 (tapered pipe thread) JIS B0205 (metric coarse thread) |
Nut section | JIS B0205 (metric fine thread) | |
Thread part seal | Sealing agent included |
Note 1: The surge pressure must be under the maximum operating pressure.
Note 2: Do not use the fittings with a leak tester or for vacuum retention because they are not guaranteed for zero leakage.
Main Component Materials
Body | C3604, PBT, PP, SUS303 |
---|---|
Stud | C3604 (thread part), SUS303 (thread part) |
Chuck | SUS304 |
Guide | SUS304 |
Release button | POM |
Seal, O-ring | NBR |
Gasket | SUS304, NBR |