Download
Clean Tubing, Polyolefin Tubing TPH Series Specifications
TPH Series external appearance
- TPH0425: outer diameter 4 mm / inner diameter 2.5 mm
- TPH0604: outer diameter 6 mm / inner diameter 4 mm
- TPH0806: outer diameter 8 mm / inner diameter 6 mm
- TPH1075: outer diameter 10 mm / inner diameter 7.5 mm
- TPH1209: outer diameter 12 mm / inner diameter 9 mm
Maximum operating pressure graph
Fluid | Air, nitrogen gas, water, DI water (pure water)*1 | |||||
---|---|---|---|---|---|---|
Maximum Operating Pressure (MPa) | 20°C | 1 | 1 | 0.7 | 0.7 | 0.7 |
40°C | 0.8 | 0.8 | 0.57 | 0.57 | 0.57 | |
60°C | 0.6 | 0.6 | 0.43 | 0.43 | 0.43 | |
80°C | 0.4 | 0.4 | 0.3 | 0.3 | 0.3 | |
Minimum bending radius mm | 15 | 25 | 35 | 45 | 55 | |
Operating temperature | -20 to 80°C, For water: 5 to 80°C | |||||
Material | Polyolefin resin |
*1: Please consult with SMC regarding other fluids.
*2: Abnormal temperature rise caused by adiabatic compression may result in the tube bursting.
*3: The minimum bending radius indicates the value at a temperature of 20°C with an outside diameter rate of change of 10% or less.
*4: Polyolefin resin is not suitable for regular pneumatic equipment piping because it is not resistant to mineral oil.