5-Port Solenoid Valve, Base Mounted, Single Unit, VQZ1000/2000/3000 Series
Product Description
SMC Solenoid Valve.
[Features]
· Can be DIN rail mounted
· IP65-compliant protective structure (DIN terminal type, common exhaust).
· Choice of metal or rubber seal available for the main valve construction.
· Built-in one-touch fitting makes piping work easy
Download
5-Port Solenoid Valve VQZ1000/VQZ2000/VQZ3000 Series, Single Unit Specifications
VQZ1000/VQZ2000/VQZ3000 Series single unit external appearance
The pipe fitting is secured with a clip, making replacement easy
| Series | Metal Seal | Rubber Seal | ||
|---|---|---|---|---|
| Fluid | Air | |||
| Maximum Operating Pressure (MPa) | 0.7 (High-pressure type: 1.0) | 0.7 | ||
| Minimum Operating Pressure MPa | 2 Position | Single | 0.1 VQZ3000, 3 position only 0.15 |
0.15 |
| Double | 0.1 | |||
| 3 Position | 0.2 | |||
| Ambient Temperature and Operating Fluid Temperature °C | -10 to 50 (no freezing) | |||
| Maximum Operating Frequency Hz | 2 Position Single, Double | 20 | 5 | |
| 3 Position | 10 | 3 | ||
| Manual | Non-locking push type, locking type (tool required) | |||
| Pilot Exhaust Method | Individual exhaust type | |||
| Lubrication | Not required | |||
| Mounting Orientation | Single: free Double / 3 position: main valve must be horizontal |
Free | ||
| Impact Resistance / Vibration Resistance: m/s2 *1: | 150/30 | |||
| Enclosure * | Dust-proof (DIN terminal: IP65 *2:) | |||
*Based on IEC60529.
*1: Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
*2: When IP65 compliant DIN terminals: VQZ2/3□51□-□Y□□W1-□-□
Solenoid Specifications
| Lead wire electrical entry | Grommet (G) M-type plug connector (M) L-type plug connector (L) DIN terminal (Y) |
|||
|---|---|---|---|---|
| G, L, M | Y | |||
| Coil Rated Voltage (V) | DC | 24, 12 | ||
| AC 50/60 Hz | 100, 110, 200, 220 * | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| High Speed Response, High Pressure | 0.9 (with light: 0.95) [0.94 (with DIN terminal light: 1.0)] | |||
| Apparent power VA * | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V 115 V |
0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)] |
0.86 (with light: 0.87) [0.94 (with indicator light: 1.07)] |
||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V 230 V |
1.30 (with light: 1.34) [1.42 (with indicator light: 1.46)] |
1.27 (with light: 1.46) [1.39 (with indicator light: 1.60)] |
||
| Surge Voltage Suppressor | Varistor | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
- *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
- For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
