Xi Lanh Khí Nén SMC CY1S Series CY1S6 CY1S10 Magnetically Coupled Rodless Cylinder

Xi Lanh Khí Nén SMC CY1S Series CY1S6 CY1S10 Magnetically Coupled Rodless Cylinder

Specifications of Magnet Type Rodless Cylinder, Slider Type / Slide Bearing CY1S Series – Xi Lanh Khí Nén SMC

Model Number Notation

How to order: image

Applicable auto switches

Applicable auto switch part number identification, reference

• * 1The water resistant type auto switch can be mounted on the above models, but it does not guarantee the water-resistant performance of the product.
  Check with the manufacturer regarding water-resistant types for the above model numbers.
• * 2Lead wire length 1 m type is only compatible with D-A93.

• *Auto switches are shipped together (but not assembled).

Individual Made-to-Order Specifications

Reference for identifying the part number of individually made-to-order specifications

Made to Order Specifications

Reference for identifying the part number for made-to-order specifications

Specifications Table

• * When setting the auto switch to the intermediate position, the maximum piston speed that can be detected is restricted by the response time of the load (relay, sequence controller, etc.).

Standard Stroke Table

• * *1) The minimum manufacturable stroke is up to 15st without a switch or with 1 switch, and up to 25st with 2 switches.
• * *2) If there are multiple switches and the stroke is shorter than 25st (up to 15st), consider X431 (2 switch rail types).

Weight Table

(Unit: kg)

Calculation method/example: CY1SG25-500
Basic weight (At 0 stroke): 1.662 kg / additional weight per 50 strokes: 0.178 kg
Cylinder Stroke: 500st
1.662 + 0.178×500 ÷ 50 = 3.442 kg

Shock Absorber Specifications

* *) The maximum absorbed energy and maximum frequency of use are the values at room temperature (approximately 20 to 25°C).

Diagram

CY1S / both sides piping type configuration diagram

Structural drawing of CY1SG / Centralized piping type

Components

• * *1) The contents of the parts of the seal set are * -marked.
• * *2) Auto switch and switch spacer are shipped together.

Packing set

• * *1) For the seal kit, the ø6 kit (inner diameter: 6 mm) includes 4, 5, 13, 19, 24, 39, and the ø10 kit (inner diameter: 10 mm) includes 4, 13, 19, 20, 24, 39, the kits for ø15 (inner diameter: 15 mm) to ø40 (inner diameter: 40 mm) include 4, 5, 6, 13, 19, 20, 24, 39 in 1 set, so please order using the order number for each tube inner diameter.
• * *2) A grease pack (10 g) is attached to the seal kit.

Dimensions of Magnet Type Rodless Cylinder, Slider Type / Slide Bearing CY1S Series

CY1S / both sides piping type

(Units: mm)

Dimensional drawing of CY1S / both sides piping type

(Units: mm)

 

Image of dimensions table for CY1S / both sides piping type

• * *) The above figure shows the case where the auto switch is installed. The auto switch and switch spacer are shipped together.

CY1SG / Centralized piping type

(Units: mm)

Dimensional drawing of CY1SG / Centralized piping type

(Units: mm)

 

Image of dimensions table for CY1SG / centralized piping type

• * *) The above figure shows the case where the auto switch is installed. The auto switch and switch spacer are shipped together.

Please refer to the table below for details about lead wire / connector specifications.