Thermo-Dryer, Refrigerant R134a (HFC) IDH4/IDH6/IDHA4/IDHA6 – Máy Sấy Khí SMC
Product Description
– Máy Sấy Khí SMC
Thermo-dryer is able to provide compressed air under the same conditions and with the same quality regardless of the season.
[Features]
· Stable supply of temperature- and pressure-controlled dry clean air.
· Power supply can be used all over the world.
· Compact and space saving.
· Can be installed close to a wall.
· Power supply voltage: Single-phase 100/200/230 V AC (50/60 Hz).
· RoHS compliant.
Download
Refrigerant R134a (HFC) IDH□ Series Specifications – Máy Sấy Khí SMC
IDH□ Series external appearance
Size
- Rated air flow capacity: 400L/min (ANR)
- Air compressor size: 3.7 kW
- Rated air flow capacity: 600 L/min (ANR)
- Air compressor size: 5.5 kW
Structure Principle Diagram (Air/Refrigerant Circuit)
Structure Principle Diagram (Air/Refrigerant Circuit)
Pneumatic Circuit
Hot and humid air entering this product is cooled down by the cooler. The moisture condensed at this time is separated by the drain separator and exhausted automatically. The pressure of the dry air is adjusted by the regulator, and oil mist and solid particles are separated by the micro mist separator with pre-filter and super mist separator. The temperature of the dry and high-purity air is adjusted by the heater, and the air is supplied to the outlet side.
*The type without filter is not applicable.
Refrigerant Circuit
The HFC gas contained in the refrigerant circuit is compressed by the compressor, and cooled and liquefied by the condenser. When passing through the capillary tube, the HFC gas is regulated and its temperature decreases. While passing through the cooler part, it evaporates rapidly, taking the heat from the compressed air, and is sucked in by the compressor. The capacity regulating valve opens when the compressed air has been cooled sufficiently, and prevents condensed water from being frozen by excessive cooling.
Standard Specifications
| Specifications | Model | ||||||
|---|---|---|---|---|---|---|---|
| IDH4-10□ | IDH4-20□ | IDHA4-23□ | IDH6-10□ | IDH6-20□ | IDHA6-23□ | ||
| Operating range*3 | Applicable fluid | Compressed Air | |||||
| Air flow capacity*1 | 100 to 500 L/min (ANR) | 200 to 800 L/min (ANR) | |||||
| Inlet air temperature | 5 to 40°C | ||||||
| Inlet air pressure | 0.3 to 1.0 MPa | ||||||
| Ambient temperature | 15 to 35°C (Relative humidity 85% or less) | ||||||
| Outlet air temperature adjustment range*2 | 15 to 30°C | ||||||
| Outlet air set pressure range | 0.15 to 0.85 MPa (The inlet air pressure should be at least 0.15 MPa higher than the outlet air pressure.) |
||||||
| Rated conditions | Air flow capacity | 400 L/min (ANR) | 600 L/min (ANR) | ||||
| Inlet air pressure | 0.7 MPa | ||||||
| Inlet air temperature | 35°C | ||||||
| Ambient temperature | 30°C | ||||||
| Outlet air set temperature | 30°C | ||||||
| Rated performance*4 | Outlet air pressure dew point | 10°C | |||||
| Outlet air temperature stability*5 | ±0.1°C (This may vary depending on the conditions.) | ||||||
| Outlet air temperature display accuracy | ±0.5°C (including accuracy of the sensor) | ||||||
| Electric specifications | Power supply*6 | Single-phase 100 V AC (50/60 Hz) |
Single-phase 200 V AC (50/60 Hz) |
Single-phase 230 V AC (50/60 Hz) |
Single-phase 100 V AC (50/60 Hz) |
Single-phase 200 V AC (50/60 Hz) |
Single-phase 230 V AC (50/60 Hz) |
| Operating current | 4.2 A | 2.1 A | 2.1 A | 9.4 A | 4.8 A | 4.8 A | |
| Earth leakage breaker capacity | 10 A | 5 A | 5 A | 15 A | 10 A | 10 A | |
| Compressor input | 180/200 W 50/60 Hz | 385/440 W 50/60 Hz | |||||
| Heater input | 220 W | 420 W | |||||
| Built-in filter specifications*7 | Nominal filtration rating | 0.01 μm (99.9% filtration efficiency) | |||||
| Cleanliness of the filter outlet side | Particles of 0.3 μm or more: 3.5 particles/L (ANR) or less | ||||||
| Temperature control method | Heater operation, PID control | ||||||
| Refrigerant type / Refrigerant charge | R134a / 0.14 kg | R134a / 0.26 kg | |||||
| Noise level (reference value)*8 | 52 dB (A) | 55 dB (A) | |||||
| Weight | 26 kg | 37 kg | |||||
| Applicable drain tube O.D. | 10 mm | ||||||
| Coating color | Body panel: urban white 1, Base: urban gray 2 | ||||||
| Compliant standards | CE marked | ||||||
*1: ANR is the value at 20°C, atmospheric pressure and relative humidity 65%.
*2: About 10 minutes are required until the temperature becomes stable after setting the temperature.
*3: The upper limit of the settable outlet air temperature varies depending on the conditions even within the operating range. Be sure to read the selection document before selecting the models.
*4: The rated performance is the performance when the operation of each part is stable without fluctuations in operating conditions and power supply. If the air flow capacity is beyond its specified range or if the air flows intermittently, the outlet air temperature range or temperature stability may not be satisfied. (If this happens, install a purge line and flow the compressed air continuously.)
*5: When the outlet air temperature is set in the range of the ambient temperature ±5°C.
*6: Keep the voltage within -5 to +10% of the rated voltage. If there is voltage fluctuation, the outlet air temperature stability may decrease. So if highly accurate temperature adjustment is required, use a stable power supply to make the voltage fluctuation smaller.
*7: The specification changes depending on the cleanliness of the inlet side air. It may take time until the cleanliness of the filter outlet side air stabilizes immediately after start of operation. The filter performance only applies to the built-in type filter.
*8: 1 m in front of the product, 1 m in height, without load, stable conditions.
IDH4-10-E
IDH4-10A
IDH4-10A-E
IDH4-10B
IDH4-10B-E
IDH4-20
IDH4-20A
IDH4-20A-E
IDH4-20B
IDH6-10
IDH6-10-E
IDH6-10A-E
IDH6-10B
IDH6-10B-E
IDH6-20
IDH6-20-E
IDH6-20A
IDH6-20A-E
IDH6-20B
IDHA4-23
IDHA4-23-E
IDHA4-23A
IDHA4-23A-E
IDHA4-23B
IDHA4-23B-E
IDHA6-23
IDHA6-23-E
IDHA6-23A
IDHA6-23A-E
IDHA6-23B
IDHA6-23B-E
