Space Saving Vacuum Ejector ZQ Series (ZQ105/ZQ107/ZQ110) – Bộ Tạo Chân Không SMC
Product Description
Space Saving Vacuum Ejector ZQ Series (ZQ105/ZQ107/ZQ110) – Bộ Tạo Chân Không SMC
Easy-to-use vacuum pressure switch.
[Features]
・ Improved operability with push button type
・ Vacuum pressure switch with LED display function
・ Up to 10 units can be copied simultaneously
・ The setting value of the master side (copy source) sensor can be copied to the slave side sensor
・ Reduction of setting labor-hours
・ Reduces setting value input errors
Download
Space Saving Vacuum Ejector ZQ Series Specifications – Bộ Tạo Chân Không SMC
Space Saving Vacuum Ejector ZQ Series external appearance 1
Space Saving Vacuum Ejector ZQ Series external appearance 2
Ejector Specifications
| Model | ZQ105 | ZQ107 | ZQ110 | |
|---|---|---|---|---|
| Nozzle Diameter (mm) | 0.5 | 0.7 | 1.0 | |
| Maximum Suction Flow Rate L/min (ANR) | 5 | 10 | 22 | |
| Air Consumption L/min (ANR) | 14 | 23 | 46 | |
| Maximum Vacuum Pressure | -80 kPa | |||
| Supply Pressure Range | Air Pressure Supply (P) Port |
0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa) |
||
| Release Pressure Supply (PD) Port |
0.3 to 0.5 MPa (For normally open type: 0.3 to 0.45 MPa) And PD pressure ≥ P pressure |
|||
| Standard Supply Pressure Note: | 0.35 MPa | 0.43 MPa | ||
| Operating Temperature Range | 5 to 50°C | |||
| Usable Fluids | Air | |||
Note: The maximum suction flow rate was obtained at the standard supply pressure.
Product Weight
- With suction filter (single unit): 95 g (*1)
- With vacuum pressure switch + suction filter (single unit): 109 g (*2)
- End plate assembly for manifold: 122 g
- *1 Includes 0.3-m connector for supply valve and release valve.
- *2 Includes a 0.3‑m connector for supply valve and release valve and a 2‑m connector for vacuum pressure switch.
Manifold Type Weight Calculation
(Unit weight) × number of stations + (weight of end plate assembly for manifold)
Example: Eight stations with a vacuum pressure switch and suction filter
109 g × 8 + 122 g = 994 g
Product Supply And Release Valves
| Type | Normally Closed Type | Latching Type | Normally Open Type | ||
|---|---|---|---|---|---|
| Standard Type (1 W) | Low Wattage Type (0.5 W) | ||||
| Model (Refer to the section on ordering solenoid valves on p. 107) | VQ110-□ | VQ110Y-□ | VQ110L-□ VQ110N-□ |
ZQ1-VQ120-□ | |
| Manual Operation | Non-locking push type / locking type (tool required) | Push-lock type | Non-locking push type / locking type (tool required) | ||
| Coil Rated Voltage | 12/24 V DC, 100/110/200/220 V AC | 12/24 V DC | 12/24 V DC, 100/110/200/220 V AC | 12/24 V DC | |
| Power Consumption (Current Value) | DC | 1 W | 0.5 W | 1 W | |
| AC 100 V | 0.5 VA (5 mA) | – | 0.6 VA (6 mA) | – | |
| 110 V AC | 0.55 VA (5 mA) | – | 0.65 VA (5.9 m) | – | |
| 200 V AC | 1.0 VA (5 mA) | – | 1.2 VA (6 mA) | – | |
| 220 V AC | 1.1 VA (5 mA) | – | 1.3 VA (5.9 mA) | – | |
| Electrical Entry | Grommet, L-type plug connector (with light / surge voltage suppressor) |
L-type plug connector (With light / surge voltage suppressor) |
Grommet, L-type plug connector (With light / surge voltage suppressor) |
||
Vacuum Pressure Switch Specifications
| Model | ZQ1-ZSE (ZSE10) | ZQ1-ZSE (ZSE10F) | ||
|---|---|---|---|---|
| Rated Pressure Range | 0 to -101 kPa | -100 to 100 kPa | ||
| Set Pressure Range / Display Pressure Range | 10 to -105 kPa | -105 to 105 kPa | ||
| Withstand Pressure | 500 kPa | |||
| Minimum Setting Unit | 0.1 kPa | |||
| Power Supply Voltage | 12 to 24 V DC ±10%, ripple (p-p) 10% or less (with power supply polarity protection) | |||
| Current Consumption | 40 mA or less | |||
| Switch Output | – | NPN or PNP open collector 2 outputs (selectable) | ||
| Maximum Load Current | 80 mA | |||
| Maximum Applied Voltage | 28 V (with NPN output) | |||
| Residual Voltage | 2 V or less (with load current of 80 mA) | |||
| Response Time | 2.5 ms or less (with anti-chattering function: 20, 100, 500, 1,000, 2,000 ms selectable) | |||
| Short Circuit Protection | Equipped | |||
| Repeatability | ±0.2% F.S. ±1 digit | |||
| Hysteresis | Hysteresis Mode | Variable from 0 Note 1: | ||
| Window Comparator Mode | ||||
| Analog Output | Voltage Output | Output Voltage (Rated Pressure Range) | 1 to 5 V ±2.5% F.S. | |
| Linearity | ±1% F.S. or less | |||
| Output Impedance | Approx. 1 k Ω | |||
| Display System | 3 1/2-digit, 7-segment LED, 1 color display (red) | |||
| Display Accuracy | ±2% F.S. ±1 digit (with ambient temperature of 25°C ±3°C) | |||
| Operation Indicator Light | Lights when ON, OUT1: green, OUT2: red | |||
| Environmental Resistance | Enclosure | IP40 | ||
| Operating Humidity Range | Operating/stored: 35 to 85% RH (no condensation) | |||
| Withstand Voltage | 1,000 V AC for 1 min. between live parts and housing | |||
| Insulation Resistance | 50 MΩ or more (500 V DC measured with megohmmeter) between live parts and housing | |||
| Temperature Characteristics | ±2% F.S. (at 25°C of operating temperature range: -5 to +50°C) | |||
| Lead Wires | Oil-resistant cabtire cord Conductor cross-sectional area: 0.15 mm2 (AWG26), 5 cores, 2 m, insulator outer diameter: 1.0 mm |
|||
Note 1: If the applied voltage fluctuates around the set value, the hysteresis must be set to a value more than the width of the fluctuations or chattering will occur.
Note 2: For specifications not listed, ejector specifications apply.
XT534-5-001-AS
ZQ1L-1-BSB-AS
ZQ1R-1-BSB-AS
ZQ-3-009-10AS
ZQ-SAE
ZQ-STB02
ZQ-STB03
ZQ-STB04
ZQ-STB05
ZQ-STB06
ZQ-STB07
ZQ-STB08
ZQ1-VQ120-5G
ZQ1-VQ120-5L
ZQ1-VQ120-5LB
ZQ1-VQ120-5LO
ZQ1-VQ120-5LOB
ZQ1-ZSEA-0-A
ZQ1-ZSEA-1-A
ZQ1-ZSEA-2-A
ZQ1-ZSEA-3-A
ZQ1-ZSEA-4-A
ZQ1-ZSEA-5-A
ZQ1-ZSEAG-0-A
ZQ1-ZSEAG-2-A
ZQ1-ZSEAG-3-A
ZQ1-ZSEAG-4-A
ZQ1-ZSEAGK-0-A
ZQ1-ZSEAGK-3-A
ZQ1-ZSEAK-2-A
ZQ1L-1-BSB-AS
ZQ1R-1-BSB-AS
ZQ-3-009-10AS
ZQ-SAE
ZQ-STB02
ZQ-STB03
ZQ-STB04
ZQ-STB05
ZQ-STB06
ZQ-STB07
ZQ-STB08
ZQ1-VQ120-5G
ZQ1-VQ120-5L
ZQ1-VQ120-5LB
ZQ1-VQ120-5LO
ZQ1-VQ120-5LOB
ZQ1-ZSEA-0-A
ZQ1-ZSEA-1-A
ZQ1-ZSEA-2-A
ZQ1-ZSEA-3-A
ZQ1-ZSEA-4-A
ZQ1-ZSEA-5-A
ZQ1-ZSEAG-0-A
ZQ1-ZSEAG-2-A
ZQ1-ZSEAG-3-A
ZQ1-ZSEAG-4-A
ZQ1-ZSEAGK-0-A
ZQ1-ZSEAGK-3-A
ZQ1-ZSEAK-2-A
ZQ1051U-J1Y5L-D32C-22
ZQ1051U-J1Y5L-EAG-00
ZQ1051U-J1Y5L-EAG-33
ZQ1051U-J1Y5L-EAG-55
ZQ1051U-J1Y5L-EBMG-33
ZQ1051U-J1Y5L-F
ZQ1051U-J1Y5L-F-55
ZQ1051U-J1Y5L-FC-55
ZQ1051U-J1Y5L-FK-55
ZQ1051U-J1Y5LB-D31CL
ZQ1051U-J1Y5LO-EBMG-30-Q
ZQ1051U-J1Y5LO-EBMG-33
ZQ1051U-J1Y5LO-EBMG-33-Q
ZQ1051U-J1Y5LO-F
ZQ1051U-J1Y5LOB-F
ZQ1051U-J1Y6L-EAG-55
ZQ1051U-J11L-EAG-33
ZQ1071U-J1Y5L-EAG-00
ZQ1071U-J1Y5L-F
ZQ1071U-J1Y5L-F-00-Q
ZQ1071U-J1Y5L-F-22
ZQ1071U-J1Y5L-F-33
ZQ1071U-J1Y5L-FK
ZQ1071U-J1Y5LO-F
ZQ1071U-J1Y5LOB-F
ZQ1071U-J11L-F
ZQ1071U-J11L-F-23
ZQ1071U-J12L-EA-00
ZQ1071U-J12L-FCMG-23
ZQ1071U-J15G-F
ZQ1071U-J15L-D31C-33
ZQ1071U-J15L-D32C
ZQ1051U-J1Y5L-EAG-00
ZQ1051U-J1Y5L-EAG-33
ZQ1051U-J1Y5L-EAG-55
ZQ1051U-J1Y5L-EBMG-33
ZQ1051U-J1Y5L-F
ZQ1051U-J1Y5L-F-55
ZQ1051U-J1Y5L-FC-55
ZQ1051U-J1Y5L-FK-55
ZQ1051U-J1Y5LB-D31CL
ZQ1051U-J1Y5LO-EBMG-30-Q
ZQ1051U-J1Y5LO-EBMG-33
ZQ1051U-J1Y5LO-EBMG-33-Q
ZQ1051U-J1Y5LO-F
ZQ1051U-J1Y5LOB-F
ZQ1051U-J1Y6L-EAG-55
ZQ1051U-J11L-EAG-33
ZQ1071U-J1Y5L-EAG-00
ZQ1071U-J1Y5L-F
ZQ1071U-J1Y5L-F-00-Q
ZQ1071U-J1Y5L-F-22
ZQ1071U-J1Y5L-F-33
ZQ1071U-J1Y5L-FK
ZQ1071U-J1Y5LO-F
ZQ1071U-J1Y5LOB-F
ZQ1071U-J11L-F
ZQ1071U-J11L-F-23
ZQ1071U-J12L-EA-00
ZQ1071U-J12L-FCMG-23
ZQ1071U-J15G-F
ZQ1071U-J15L-D31C-33
ZQ1071U-J15L-D32C
ZQ1101U-J1Y5L-EAMG-00
ZQ1101U-J1Y5L-EAMG-33-N
ZQ1101U-J1Y5L-F
ZQ1101U-J1Y5L-F-33
ZQ1101U-J1Y5L-F-33-N
ZQ1101U-J1Y5L-F-53
ZQ1101U-J1Y5LB-F-23
ZQ1101U-J1Y5LO-D31CL
ZQ1101U-J1Y5LO-EAMG-00
ZQ1101U-J1Y5LO-ECGK-00
ZQ1101U-J1Y5LO-ECMG-53
ZQ1101U-J1Y5LO-ECMGK-00
ZZQ-SAE
ZZQ101-BSB
ZZQ101-BSC
ZZQ102-BSB
ZZQ102-BSC
ZZQ103-BSB
ZZQ103-BSC
ZZQ104-BSB
ZZQ104-BSC
ZZQ105-BSB
ZZQ105-BSC
ZZQ106-BSB
ZZQ106-BSC
ZZQ107-BSB
ZZQ107-BSC
ZQ1101U-J1Y5L-EAMG-33-N
ZQ1101U-J1Y5L-F
ZQ1101U-J1Y5L-F-33
ZQ1101U-J1Y5L-F-33-N
ZQ1101U-J1Y5L-F-53
ZQ1101U-J1Y5LB-F-23
ZQ1101U-J1Y5LO-D31CL
ZQ1101U-J1Y5LO-EAMG-00
ZQ1101U-J1Y5LO-ECGK-00
ZQ1101U-J1Y5LO-ECMG-53
ZQ1101U-J1Y5LO-ECMGK-00
ZZQ-SAE
ZZQ101-BSB
ZZQ101-BSC
ZZQ102-BSB
ZZQ102-BSC
ZZQ103-BSB
ZZQ103-BSC
ZZQ104-BSB
ZZQ104-BSC
ZZQ105-BSB
ZZQ105-BSC
ZZQ106-BSB
ZZQ106-BSC
ZZQ107-BSB
ZZQ107-BSC
Liên Hệ Medin Co., Ltd
- Công ty TNHH Mễ Đình được thành lập từ năm 2006.
- Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
- Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
- Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
- Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”
- Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
- Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.
👉 Công ty 𝐌𝐞𝐝𝐢𝐧 hỗ trợ:
𝑇𝑢̛ 𝑣𝑎̂́𝑛 𝑔𝑖𝑎̉𝑖 𝑝ℎ𝑎́𝑝 𝑡𝑜̂́𝑖 𝑢̛𝑢
𝐶𝑜́ 𝑠𝑎̆̃𝑛 𝑠𝑎̉𝑛 𝑝ℎ𝑎̂̉𝑚 𝑑𝑢̀𝑛𝑔 𝑡ℎ𝑢̛̉
𝐻𝑜̂̃ 𝑡𝑟𝑜̛̣ 𝑡𝑒𝑠𝑡 𝑡𝑎̣̂𝑛 𝑛𝑜̛𝑖
👉 Nếu bạn có bất kỳ yêu cầu nào, vui lòng liên hệ với chúng tôi.
☎️ Hotline: 0902782082
🌐 Website: https://www.medin.com.vn/
- 𝐕𝐏 𝐇𝐨 𝐂𝐡𝐢 𝐌𝐢𝐧𝐡: 01 Đường 410C, Phước Long A, Tp. Thủ Đức
- 𝐇𝐚 𝐍𝐨𝐢 𝐛𝐫𝐚𝐧𝐜𝐡: 562 Nguyễn Văn Cừ, Long Biên, Hà Nội
- 𝐃𝐚 𝐍𝐚𝐧𝐠 𝐛𝐫𝐚𝐧𝐜𝐡: 63 Phan Đăng Lưu, Hải Châu, Đà Nẵng
