AEP100-02 Exhaust Pressure Type Liquid Collector – Pneumatic Related Devices – Bộ điều chỉnh áp suất SMC

Download

Details of AEP100-02 Exhaust Pressure Type Liquid Collector – Pneumatic Related Devices – Bộ điều chỉnh áp suất SMC

AEP100-02 Exhaust Pressure Type Liquid Collector Specifications

Model	AEP100-02
Collected fluid	Hydraulic fluid / lubricant
Applicable fluids	Air
Operating pressure	200 to 700 kPa (0.2 to 0.7 MPa)
Fluid temperature	5 to 60°C
Collected fluid temperature	5 to 60°C
Collected fluid discharge volume	10 mL/one time (at 0.5 MPa)
Collected fluid lifting range	8 m (at 0.5 MPa)
Exhaust port effective area	21 mm2<Cv1.1 >
Port size	3-PT 1/4
Filtration	40 mesh (gauze)
Weight	0.8 kg

Working principle

When the exhaust pressure from the switching valve enters into port (7), the piston (8) and diaphragm (6) compress and displace spring (4), the exhaust pressure is released into the atmosphere from exhaust port (9), and at the same time the diaphragm is returned to its original condition by the recovery power of the spring.
At this time, the diaphragm interior (10) is under negative pressure, causing the check ball (11) to be closed while check ball (13) is open, and causing built-up oil outside to enter into the diaphragm interior.
When exhaust pressure once again enters, operation of the piston and diaphragm causes the diaphragm to be compressed, and check ball (11) opens, causing the oil in the diaphragm interior to be discharged from discharge port (12).

 

👉 Công ty 𝐌𝐞𝐝𝐢𝐧 hỗ trợ:
 𝑇𝑢̛ 𝑣𝑎̂́𝑛 𝑔𝑖𝑎̉𝑖 𝑝ℎ𝑎́𝑝 𝑡𝑜̂́𝑖 𝑢̛𝑢
 𝐶𝑜́ 𝑠𝑎̆̃𝑛 𝑠𝑎̉𝑛 𝑝ℎ𝑎̂̉𝑚 𝑑𝑢̀𝑛𝑔 𝑡ℎ𝑢̛̉
 𝐻𝑜̂̃ 𝑡𝑟𝑜̛̣ 𝑡𝑒𝑠𝑡 𝑡𝑎̣̂𝑛 𝑛𝑜̛𝑖