Pilot-Operated 2-Port Solenoid Valve For Dry Air VQ20/30 Series Single Unit- Van Điện Từ SMC

Download

2-Port Solenoid Valve (Pilot Operated, For Dry Air) Single Unit Specifications- Van Điện Từ SMC

VQ20 External Appearance

VQ30 external appearance

Symbols

When the valve is closed, IN and OUT are blocked. However, if the pressure in port 2 is greater than the pressure in port 1, the fluid cannot be blocked.

Standard Specification Table

• *1This product is for dry air. Use in clean air and take care that drain and oil content do not get into this product.
• *2Use dry air when operating at low temperatures and with no condensation.
• *3Manual operation is available for DIN terminal type only.
• *4Vibration resistance: No malfunction occurred in 1 sweep test between 8.3 and 2,000 Hz. The test was performed in both energized and de-energized states in the axial and right angle directions of the main valve/armature. (Initial value)
  Impact resistance: No malfunctions after testing using a drop-type impact tester under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
• *5DIN terminal type supports dust-proof and blow-proof (IP65) performance.