Download
Specifications of Digital Pressure Switch (Built-in Regulator Type) ISE35 Series – Cảm Biến Áp Suất SMC
External appearance of digital pressure switch (built-in regulator type)
Lead entry specification ISE35-N (Wiring bottom entry)
Lead entry specification ISE35-R (Wiring top entry)
Option 1: ISE35-□-□-□L (Lead with connector [2 m in length])
Option 2: ISE35-□-□-□□A (AR/AW Series installation kit)
Option 2: ISE35-□-□-□□B (ARM10/11 Series mounting kit)
Applicable Series
A product series that this product can be installed on.
Product series name | Product series model |
---|---|
F.R.L. combination | AC20・AC25・AC30・AC50・AC55・AC60 |
AC20A・AC30A・AC40A・AC50A・AC60A | |
AC20B・AC25B・AC30B・AC50B・AC55B・ AC60B | |
AC20C・AC25C・AC30C・AC40C | |
AC20D・AC30D・AC40D | |
Regulator | AR20 (K)・AR25 (K)・AR30 (K)・AR40 (K)・ AR50 (K)・AR55 (K)・AR60 (K) |
Filter Regulator | AW20 (K)・AW30 (K)・AW40 (K)・AW60 (K) |
Mist separator Regulator |
AWM20・AWM30・AWM40 |
Micro mist separator Regulator |
AWD20・AWD30・AWD40 |
Small manifold Regulator |
ARM10・ARM11 |
Direct acting precision regulator | ARP20 (K)・ARP30 (K)・ARP40 (P) |
Model Number Notation
Output specifications
- 25: NPN output
- 65: PNP output
Unit specifications
- Blank: With unit switching function * 1
- M: SI unit fixed * 2
- P: Pressure unit: psi (default) with unit switching function * 1
- * 1Under the New Measurement Act of Japan, units with the unit switching function cannot be used in Japan.
- * 2Fixed unit: MPa
Specifications
Model | ISE35 | |
---|---|---|
Rated pressure range | 0 to 1 MPa | |
Display / Set pressure range | -0.1 to 1 MPa | |
Withstand pressure | 1.5 MPa | |
Display / Minimum set unit | 0.01 MPa | |
Fluid | Air, non-corrosive gases, nonflammable gas | |
Power supply voltage | 12 to 24 V DC ± 10%, ripple (p-p) 10% or less (With reverse connection protection) | |
Current Consumption | 55 mA or less (At no load) | |
Switch output | NPN or PNP open collector output, 1 output | |
– | Maximum load current | 80 mA |
Maximum applied voltage | 30 V (at NPN output) | |
Residual voltage | 1 V or less (with load current of 80 mA) | |
Response Time | 1s (0.25, 0.5, 2, 3s selection) | |
Short-circuit protection | Yes | |
Repeatability | ±1%F.S | |
Hysteresis | Hysteresis mode | Adjustable (can be set from 0) |
Window Comparator Mode | ||
Display | 3-digit 7-segment display, 2-color display (red/green) Linkable with switch | |
Display accuracy | ±2% F.S. ±1 digit (At 25°C ± 3°C) | |
Indicator light | OUT: Lights when ON (Green) | |
Environment | Protective Enclosure | IP40 |
Operating temperature range | -5 to 50℃ (No condensation or freezing) | |
Lead wire with connector (Option: For L) |
Oil-resistant cabtire cord 3-core ø3.4 (diameter: 3.4 mm) 2 m Conductor cross-sectional area: 0.2 mm^2 (AWG25) Insulator outer diameter: 1.16 mm |
|
Weight | Approx. 14 g (main unit only) Approx. 38 g (Including lead wire with connector) | |
Standards | CE UL/CSA (E216656) |
ISE35-N-25-A
ISE35-N-25-A-X501
ISE35-N-25-B
ISE35-N-25-B-X501
ISE35-N-25-L
ISE35-N-25-LA
ISE35-N-25-LB
ISE35-N-25-M
ISE35-N-25-MA
ISE35-N-25-MB
ISE35-N-25-ML
ISE35-N-25-MLA
ISE35-N-25-MLA-X5
ISE35-N-25-MLA-X501
ISE35-N-25-MLB
ISE35-N-25-P
ISE35-N-25-PB-X501
ISE35-N-25-PL
ISE35-N-65-LB
ISE35-N-65-M
ISE35-N-65-MA
ISE35-N-65-MB
ISE35-N-65-ML
ISE35-N-65-MLA
ISE35-N-65-MLB
ISE35-N-65-P
ISE35-N-65-PA
ISE35-N-65-PB
ISE35-N-65-PL
ISE35-N-65-PLA
ISE35-N-65-PLB
ISE35-R-25
ISE35-R-25-A
ISE35-R-25-B
ISE35-R-25-MLB
ISE35-R-25-P
ISE35-R-25-PA
ISE35-R-25-PLA
ISE35-R-25-PLB
ISE35-R-65
ISE35-R-65-A
ISE35-R-65-B
ISE35-R-65-L
ISE35-R-65-LA
ISE35-R-65-LB
ISE35-R-65-M
ISE35-R-65-MA
ISE35-R-65-MB
ISE35-R-65-MLA
ISE35-R-65-MLB
ISE35-R-65-P
ISE35-R-65-PA
ISE35-R-65-PL
ISE35-R-65-PLA
ZS-32-A
ZS-32-C
ZS-32-D
ISE35-N-25-PLA
ISE35-N-65
ISE35-N-65-A
ISE35-N-65-A-X501
ISE35-R-25-L
ISE35-R-25-LA
ISE35-R-25-LB
ISE35-R-25-M
ISE35-R-25-MA
ISE35-R-25-MB