Digital Vacuum Switch VP32 – Cảm Biến Áp Suất Vmeca

Pressure Range: -101.3 ~ 100 kPa, 0 ~ 1000 kPa
Display: LED 4-digit, 7-segment
Sensor Outputs: NPN or PNP open collector
Weight: 80 g

Danh mục: System Accessories - Phụ kiện bơm chân không, Vacuum and Pressure Switches, Sensors - Cảm Biến Áp Suất, VMECA

Mô tả

Downloads

Digital Vacuum Switch VP32 – Cảm Biến Áp Suất Vmeca

Description

Vacuum switches are a type of pressure switch that functions in the vacuum end of the pressure. Their primary purpose is to monitor vacuum status and open or close a connection when there is a change in the vacuum level.

Pressure Range: -101.3 ~ 100 kPa, 0 ~ 1000 kPa
Display: LED 4-digit, 7-segment
Sensor Outputs: NPN or PNP open collector
Weight: 80 g

Specifications

General Specifications

Model		V32P	V32V	V32C
Pressure range		0 ~ 1,000 kPa	-101.3 ~ 10 kPa	-101 ~ 101 kPa
Withstand pressure		1,500 kPa	500 kPa	500 kPa
Fluid		Filtered air, Non-corrosive, Non-flammable gas
Set pressure resolution	kPa	–	0.1	0.1
	MPa	0.001	–	–
	Kgf/cm²	0.01	0.001	0.001
	bar	0.01	0.001	0.001
	psi	0.1	0.01	0.01
	inHg	–	0.1	0.1
	mmHg	–	1	1
Power supply voltage		12 to 24V DC±10%, Ripple (P-P) 10% or less
Current consumption		≤40mA (With no load)
Switch output	Output type	2-NPN or 2-PNP open collector
	Max. load current	125 mA
	Max. supply voltage	30V DC @ NPN output, 24V DC @ PNP output
	Residual voltage	≤1.5V
	Response time	≤2.5 ms (Chattering-proof function: 25, 100, 250, 500, 1000, 1500 ms selections)
	Output short prot.	Yes
Analog output	Voltage output	1 ~ 5 V (±2.5%)
	Voltage impedance	About 1 Ω
	Linearity	±1% F.S.
Display	LED Display	4 digit, 7 segment (red)
	Switch ON indicator	Out-1 red/ Out-2 green
	Updates time	About 0.2 s
	Indicator accuracy	±2% F.S. ±1 digit (ambient temperature: 25±3℃)
Repeatability (Switch output)		±0.2% F.S. ±1 digit
Environment	Enclosure	IP40
	Operation temp.	0 ~ 50℃
	Storage ambient temp.	-10 ~ 60℃ (No condensation or freezing)
	Ambient voltage	35 ~ 85% RH (No condensation)
	Withstand voltage	1000V AC in -1min (between case and lead wire)
	Insulation resistance	500 MΩ (at 500V DC, between case and lead wire)
	Vibration	Total amplitude 1.5mm or 10G, 10~55 Hz scan for 1-min, 2-hour each direction of X, Y, and Z
	Shock	980 m/s² (10G), 3-time each in direction of X, Y, and Z
Temperature characteristic		±2% F.S. of detected pressure (25℃) at temp. range of 0 ~ 50℃
Port size		M5
Lead wire		26 AWG, UL AWM 20276, 1000 mm
Weight		80 g (with 2-meter lead wire)

VP32: NPN output

VP32: NPN output with Analog output

VP32: PNP output

VP32: PNP output with Analog output

Dimensions

Dimensions

VP32: Body

dim_vp32_1

VP32: Mounting bracket

dim_vp32_2

VP32: Panel Type

dim_vp32_3

Order Numbers

VP32 series switches

Part Number	Description
VP32C-01-F1	Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, 2m lead-wire
VP32C-01-F1-C	Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, M8 4-pin male
VP32C-01-F1-A	Vacuum switch, 2-color LED-display, NPN 2-output, Analog supply, 2m lead-wire
VP32C-03-F1	Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, 2m lead-wire
VP32C-03-F1-C	Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, M8 4-pin male
VP32C-03-F1-A	Vacuum switch, 2-color LED-display, PNP 2-output, Analog supply, 2m lead-wire
VP32V-01-F1	Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, 2m lead-wire
VP32V-01-F1-C	Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, M8 4-pin male
VP32V-01-F1-A	Vacuum switch, 2-color LED-display, NPN 2-output, Analog supply, 2m lead-wire
VP32V-03-F1	Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, 2m lead-wire
VP32V-03-F1-C	Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, M8 4-pin male
VP32V-03-F1-A	Vacuum switch, 2-color LED-display, PNP 2-output, Analog supply, 2m lead-wire
VP32P-01-F1	Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, 2m lead-wire
VP32P-01-F1-C	Vacuum switch, 2-color LED-display, NPN 2-output, No analog supply, M8 4-pin male
VP32P-01-F1-A	Vacuum switch, 2-color LED-display, NPN 2-output, Analog supply, 2m lead-wire
VP32P-03-F1	Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, 2m lead-wire
VP32P-03-F1-C	Vacuum switch, 2-color LED-display, PNP 2-output, No analog supply, M8 4-pin male
VP32P-03-F1-A	Vacuum switch, 2-color LED-display, PNP 2-output, Analog supply, 2m lead-wire
VCM8-4-2	M8-female connector, 4-Pin & 2m lead-wire
Bracket D	Mounting bracket kit, for direct installtion, BT-1 & BT-2
Bracket E	Mounting bracket kit, for panel installation, FPC-1, PA-1, & PA-2

Downloads

Catalog & CAD files

CAD 2D File
VP32 Switches
CAD 3D File
VP32 Switches
Catalog
VP32 Switches

Liên Hệ Medin Co., Ltd

Công ty TNHH Mễ Đình được thành lập từ năm 2006.
Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”

Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.

👉 Công ty 𝐌𝐞𝐝𝐢𝐧 hỗ trợ:
𝑇𝑢̛ 𝑣𝑎̂́𝑛 𝑔𝑖𝑎̉𝑖 𝑝ℎ𝑎́𝑝 𝑡𝑜̂́𝑖 𝑢̛𝑢
𝐶𝑜́ 𝑠𝑎̆̃𝑛 𝑠𝑎̉𝑛 𝑝ℎ𝑎̂̉𝑚 𝑑𝑢̀𝑛𝑔 𝑡ℎ𝑢̛̉
𝐻𝑜̂̃ 𝑡𝑟𝑜̛̣ 𝑡𝑒𝑠𝑡 𝑡𝑎̣̂𝑛 𝑛𝑜̛𝑖