Bộ lọc khí SMC Air Filter LLB1 Series Air-Blow Module

Download

Bộ lọc khí SMC Air Filter LLB1 Series Air-Blow Module

[Features] · Reduces piping labor time and enables space saving.
· Compact integration of all devices.
· Parts in contact with fluid: Grease-free.
· Can be combined in 3 pattern variations.
· Built-in clean air filter.
· Filtration: 0.01 μm (filtration efficiency 99.99%).
· Centralized pressure control is achieved with compact design.

Air-Blow Module Common Specifications

Applicable Fluid		Air, N2 gas
Maximum Operating Pressure		0.7 MPa
Set Pressure Range		0.05 to 0.6 MPa (0.05 to 0.35 MPa)*3
Withstand Pressure		1.0 MPa
Working Fluid Temperature		5 to 45°C (no freezing)
Ambient Temperature
Flow Rate Range*1		Up to 100 L/min (ANR)
Filtration*2		0.01 μm (filtration efficiency 99.99%)
Fluid Contact Space Material	Body	AL
	Bushing	AL
	Packing	HNBR
Fitting Material	Straight ø4 mm	POM, SUS, PBT, NBR (fluorine coating)
	Straight ø6 mm	POM, SUS, Brass (electroless nickel plating), NBR (fluorine coating)
	Elbow	POM, SUS, Brass (electroless nickel plating), PBT, NBR (fluorine coating)
Applicable Tubing Material		PFA, polyolefin, soft polyolefin, polyurethane*4

*1: The maximum flow rate varies depending on set pressure. Refer to “Flow Rate Characteristics” graph for details.
*2: Measured under manufacturer’s specified conditions.
*3: The upper limit value of the set pressure range may vary according to the part number.
*4: Due to the softness of polyurethane material, the tube may fold when inserting. Hold the tube at the end and insert securely all the way in.

Pressure Reducing Valve Unit Specifications

Pressure Reducing Valve Structure		Direct acting
Relief Structure		Relief type
Pressure Gauge Specifications	Display Accuracy	±3% F.S. (full span)
	Calibration Angle	230 °
	Limit Indicator	Yes
Fluid Contact Space Material	Body, Port Plug	PBT
	Valve Seat, Stem	POM
	Diaphragm	Weatherproof NBR
	Valve	Aluminum alloy (chromate), HNBR
	Valve Spring	SUS
	O-ring	HNBR
	Without Pressure Display Function	POM, HNBR
	With Pressure Gauge	Brass, HNBR
	Digital Pressure Switch	PPS, Silicone, HNBR

ON/OFF Valve Unit Specifications

Valve Structure		Pilot-operated 2-port poppet type
Ambient and Fluid Temperature		-10 to +50°C*1
Impact Resistance/Vibration Resistance		150/30 m/s2*2
Internal Leakage cm3/min		15 or less
External Leakage cm3/min		15 or less
Mounting Orientation		Free
Coil Rated Voltage		12 V DC, 24 V DC
Allowable Voltage Fluctuation		±10% of rated voltage
Coil Insulation Type		Equivalent to B type
Power Consumption	V5, V6	Inrush: 2.9 W Holding: 0.6 W
	V5E	1.8 W
Lead Wire Electrical Entry Method		Grommet
Flow Rate Characteristics	C [dm3/(s·bar)]	V5, V6: 1.4, V5E: 0.71
	b	V5, V6: 0.23, V5E: 0.25
	Cv	V5, V6: 0.33, V5E: 0.17
Minimum Operating Pressure Differential		0.01 MPa*3
Maximum Operating Pressure		0.6 MPa
Response Time*4	ON	10 ms or less (with power-saving circuit)
	OFF	15 ms or less (with power-saving circuit)
Fluid Contact Space Material	Body	PBT
	Diaphragm	HNBR
	Movable/Fixed Armature	SUS

*1: Use dry air to prevent condensation when operating at low temperatures.
*2: Vibration resistance: No malfunction occurred under any of the conditions tested in a one-sweep test between 8.3 to 2,000 Hz. Test was performed in axial and orthogonal directions to the main valve/movable armature at both energized and de-energized states. (Value at the initial state)
Impact resistance: No malfunction resulted from the impact test using a drop impact tester under any of the conditions tested. The test was performed once for each set of conditions, in axial and orthogonal directions to the main valve/movable armature at both energized and de-energized states. (Value at the initial state)
*3: If a throttle (nozzle, etc.) is mounted on the outlet side piping, the pressure differential when ON is smaller. Ensure that the pressure differential does not drop below 0.01 MPa.
*4: JIS8375 (at supply pressure of 0.5 MPa) (Numerical value of response time varies according to pressure and quality of air.)

Product Outline Dimensional Drawing

(Unit: mm)

 

• Fitting size ø4 mm: A / 13 mm, B / 12.2 mm, C / 20.5 mm
• Fitting size ø6 mm: A / 13.5 mm, B / 14.3 mm, C / 21 mm

(Unit: mm)

 

• Fitting size ø4 mm: A / 13 mm, B / 12.2 mm, C / 20.5 mm
• Fitting size ø6 mm: A / 13.5 mm, B / 14.3 mm, C / 21 mm

(Unit: mm)

 

*Acrylic name plate: Shipped together (unassembled)

• Fitting ø4 mm: A / 9.5 mm, B / 12.2 mm, C / 20.5 mm
• Fitting size ø6 mm: A / 9 mm, B / 14.3 mm, C / 21 mm

Component Parts

(Unit: mm)

 

No.	Description			Note
1	Pressure reducing valve ass’y	Without pressure gauge		–
		With digital pressure switch		For set pressure range 0 to 0.35 MPa: LVB1-2-2
		NPN open collector
		With digital pressure switch		For set pressure range 0 to 0.35 MPa: LVB1-3-2
		PNP open collector
		With Pressure Gauge		For set pressure range 0 to 0.35 MPa: LVB1-4-2
		Acrylic name plate		–
2	ON/OFF valve	12 V DC		–
		24 V DC (2.9 W)
		24 V DC (1.8 W)
3	Clean air filter ass’y with throttle valve	Replacement element		–
4	IN side single-action fitting ass’y	Straight	ø4 mm	–
			ø6 mm
		Elbow	ø4 mm
			ø6 mm
5	OUT side single-action fitting ass’y	Straight	ø4 mm	–
			ø6 mm
		Elbow	ø4 mm
			ø6 mm
6	Pressure check switch			–
7	Fitting for pressure check switch			–

Product Flow Rate Characteristics

Conditions

• 1. ø6 mm tube length: measured at IN side = 600 mm / OUT side = 100 mm.
• 2.Measured with regulator fully open.

*The flow rate characteristics are representative values.

Precautions

• *Ensure that you read the specific product precautions prior to use.
• *See the manufacturer’s catalog for product information other than the above.
• *Product pictures are example representations for the product series. Please be aware that actual product specifications may be different.

Design and Selection

• *Confirm the specifications: Give due consideration to the operating conditions such as the application, fluid and environment, and use within the operating ranges specified in the manufacturer’s catalog.
• *Ensure sufficient maintenance space: Provide the required space for maintenance inspection.
• *Fluid pressure range: Supplied fluid pressure must be within the operating pressure range specified in the manufacturer’s catalog.

Mounting

• *If air leakage increases, or equipment does not operate correctly, stop use immediately.
• *After mounting, perform suitable function and leak testing to confirm that the mounting is correct.

 

Giới thiệu SMC Việt Nam

SMC là thương hiệu hàng đầu thế giới trong lĩnh vực công nghệ khí nén, cung cấp các giải pháp tiên tiến nhằm hỗ trợ tự động hóa và tối ưu hóa quy trình sản xuất.

Với nền tảng vững chắc trong ngành, SMC Việt Nam luôn đi đầu trong việc nghiên cứu, đổi mới và phát triển sản phẩm, góp phần nâng cao năng suất và tiết kiệm lao động cho các doanh nghiệp công nghiệp.

Với phương châm “đóng góp vào tự động hóa và tiết kiệm lao động trong ngành công nghiệp”, SMC Việt Nam không ngừng cải tiến và mang đến những sản phẩm công nghệ tiên tiến nhất.

SMC Việt Nam cam kết cung cấp những giải pháp hiện đại, giúp khách hàng duy trì lợi thế cạnh tranh trên thị trường.

Medin Company cung cấp các sản phẩm SMC tại Việt Nam.

Đa dạng các sản phẩm và giải pháp khí nén phục vụ cho nhiều ngành công nghiệp khác nhau, bao gồm:

• Xy lanh khí nén – Giúp kiểm soát chuyển động chính xác và hiệu quả.
• Van điện từ – Ứng dụng rộng rãi trong điều khiển luồng khí nén.
• Bộ lọc khí nén – Đảm bảo chất lượng khí nén tối ưu.
• Cảm biến và bộ điều khiển – Tăng cường tự động hóa trong quy trình sản xuất.

———————-
👉 Xem thêm sản phẩm của SMC