Regulator – Single Unit Type, ARM10 Series – Bộ Chỉnh Áp Khí Nén SMC
Product Description
Regulator – Single Unit Type, ARM10 Series – Bộ Chỉnh Áp Khí Nén SMC
Regulator – Single Unit Type, ARM10 Series; available with a variety of one-touch fitting types and sizes.
[Features]
· Select the most appropriate type and size for the given installation conditions.
· Backflow function equipped as standard.
· Compatible with units with a digital pressure switch.
Download
Regulator – Single Unit Type, ARM10 Series: Details – Bộ Chỉnh Áp Khí Nén SMC
ARM10F: panel installation example
Regulator, Single Unit Specification, ARM10 Series: JIS code
Note) With backflow function as standard. The main valve opens when the inlet pressure is released, and then the outlet pressure backflows into the inlet side.
Regulator – Single Unit Type, ARM10 Series Specification
ARM10: Model Number Notation
Model number example
(1) IN/OUT Fitting Type
ARM10 IN/OUT fitting type
(Unit: mm)
| Mounting position | IN side | OUT side | ||||||
|---|---|---|---|---|---|---|---|---|
| Fitting type | Straight | Elbow Note) | Straight | Elbow Note) | ||||
| Code | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) |
| 06 | ● | – | – | – | ● | – | – | – |
| 07 | – | ● | – | – | ● | – | – | – |
| 08 | – | ● | – | – | – | ● | – | – |
| 18 | – | – | ● | – | – | ● | – | |
| 19 | – | – | – | ● | – | – | ● | – |
| 20 | – | – | – | ● | – | – | – | ● |
| 25 | ● | – | – | – | – | ● | – | |
| 26 | – | ● | – | – | – | – | ● | – |
| 27 | – | ● | – | – | – | – | – | ● |
| 32 | – | – | ● | – | ● | – | – | – |
| 33 | – | – | – | ● | ● | – | – | – |
| 34 | – | – | – | ● | – | ● | – | – |
(Units: inches)
| Mounting position | IN side | OUT side | ||||||
|---|---|---|---|---|---|---|---|---|
| Fitting type | Straight | Elbow Note) | Straight | Elbow Note) | ||||
| Code | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) |
| 56 | ● | – | – | – | ● | – | – | – |
| 57 | – | ● | – | – | ● | – | – | – |
| 58 | – | ● | – | – | – | ● | – | – |
| 68 | – | – | ● | – | – | ● | – | |
| 69 | – | – | – | ● | – | – | ● | – |
| 70 | – | – | – | ● | – | – | – | ● |
| 77 | – | ● | – | – | – | – | – | ● |
| 83 | – | – | – | ● | ● | – | – | – |
| 84 | – | – | – | ● | – | ● | – | – |
Note) For types with a digital pressure switch, depending on piping direction, be sure to apply caution so as to ensure that there is no interference with the connector.
(2) Accessories
ARM10 accessories
| Code | None | Bracket Note 1) | Pressure display function Note 2) | Panel nut |
|---|---|---|---|---|
| No symbol | ● | – | – | – |
| B | – | ● | – | (●) |
| G | – | – | ● | – |
| P | – | – | – | ● |
| BG | – | ● | ● | (●) |
| GP | – | – | ● | ● |
Note 1) For types with a bracket, panel nuts are also included.
Note 2) The pressure display function means that the product comes with a pressure gauge or a digital pressure switch. For types with a digital pressure switch, the “Digital Pressure Switch Output Specification” (5) must be selected. If “Digital Pressure Switch Output Specification” (5) is not selected, then a pressure gauge will be included with the regulator. Pressure gauges are not compatible with copper/fluorine-free specifications.
(3) Semi-Standard Specifications
| Code | None | 0.35‑MPa setting Note 1) | Non-relieving | Oil-free specification Note 2) |
|---|---|---|---|---|
| No symbol | ● | – | – | – |
| 1 | – | ● | – | – |
| 2 | – | – | ● | – |
| 3 | – | – | – | ● |
| 4 | – | ● | ● | – |
| 5 | – | ● | – | ● |
| 6 | – | – | ● | ● |
| 7 | – | ● | ● | ● |
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.
Note 2) The oil-free specification is grease-free in the fluid-contacting areas.
(4) Unit Notation
| Code | Contents |
|---|---|
| No symbol | Unit used on product nameplate and pressure gauge is MPa |
| Z Note 1, 2) | Unit used on product nameplate and pressure gauge is psi |
| ZA Note 1, 3) | Digital pressure switch: with unit selection function (Initial setting is MPa) |
Note 1) Under new Japanese measurement laws, this product is only available for sale outside of Japan (SI units are used in Japan). However, the pressure switch offers dual unit presentation in both MPa and psi.
Note 2) Digital pressure switch, which has the unit selection function, has a default setting of psi.
Note 3) Refers to digital pressure switch. Includes lead wire with connector (2 m).
(5) Digital Pressure Switch Output Specification
| Code | Contents |
|---|---|
| No symbol | None |
| N | NPN open collector |
| P | PNP open collector |
Note) For types with a digital pressure switch, the “pressure display function” as outlined in (2) Accessories is required. The electrical entry of the lead wire is positioned on the opposite side to the handle.
ARM10F: Model Number Notation
Model number example
(1) IN/OUT Piping Position
ARM10F: IN/OUT piping position
| Code | Position | |||
|---|---|---|---|---|
| IN side | OUT side | |||
| Bottom | Top | Bottom | Top | |
| 1 | ● | – | ● | – |
| 2 | – | ● | – | ● |
| 3 | ● | – | – | ● |
| 4 | – | ● | ● | – |
(2) IN/OUT Fitting Type
(Unit: mm)
| Mounting position | IN side | OUT side | ||||||
|---|---|---|---|---|---|---|---|---|
| Fitting type | Straight | Elbow Note) | Straight | Elbow Note) | ||||
| Code | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) | ø4 (diameter 4 mm) | ø6 (diameter 6 mm) |
| 06 | ● | – | – | – | ● | – | – | – |
| 07 | – | ● | – | – | ● | – | – | – |
| 08 | – | ● | – | – | – | ● | – | – |
| 18 | – | – | ● | – | – | ● | – | |
| 19 | – | – | – | ● | – | – | ● | – |
| 20 | – | – | – | ● | – | – | – | ● |
| 25 | ● | – | – | – | – | ● | – | |
| 26 | – | ● | – | – | – | – | ● | – |
| 27 | – | ● | – | – | – | – | – | ● |
| 32 | – | – | ● | – | ● | – | – | – |
| 33 | – | – | – | ● | ● | – | – | – |
| 34 | – | – | – | ● | – | ● | – | – |
(Units: inches)
| Mounting position | IN side | OUT side | ||||||
|---|---|---|---|---|---|---|---|---|
| Fitting type | Straight | Elbow Note) | Straight | Elbow Note) | ||||
| Code | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) | ø5/32 (diameter 5/32″) | ø1/4 (1/4‑inch diameter) |
| 56 | ● | – | – | – | ● | – | – | – |
| 57 | – | ● | – | – | ● | – | – | – |
| 58 | – | ● | – | – | – | ● | – | – |
| 68 | – | – | ● | – | – | ● | – | |
| 69 | – | – | – | ● | – | – | ● | – |
| 70 | – | – | – | ● | – | – | – | ● |
| 77 | – | ● | – | – | – | – | – | ● |
| 83 | – | – | – | ● | ● | – | – | – |
| 84 | – | – | – | ● | – | ● | – | – |
Note) For types with a digital pressure switch, depending on piping direction, be sure to apply caution so as to ensure that there is no interference with the connector.
(3) Accessories
ARM10F accessories
| Code | None | Bracket Note 1) | Pressure display function Note 2) | Panel nut | Decorative cover Note 3) |
|---|---|---|---|---|---|
| No symbol | ● | – | – | – | – |
| B | – | ● | – | (●) | – |
| G | – | – | ● | – | – |
| BG | – | ● | ● | (●) | – |
| GP | – | – | ● | ● | – |
| GPC Note 4) | – | – | ● | ● | ● |
Note 1) For types with a bracket, panel nuts are also included.
Note 2) The pressure display function means that the product comes with a pressure gauge or a digital pressure switch. For types with a digital pressure switch, the “Digital Pressure Switch Output Specification” (6) must be selected. If “Digital Pressure Switch Output Specification” (6) is not selected, then a pressure gauge will be included with the regulator. Pressure gauges are not compatible with copper/fluorine-free specifications.
Note 3) Type with digital pressure switch not supported.
Note 4) Please note that the external dimensions will be bigger when GPC is selected.
(4) Semi-Standard Specifications
| Code | None | 0.35‑MPa setting Note 1) |
Non-relieving | Oil-free specification Note 2) |
|---|---|---|---|---|
| No symbol | ● | – | – | – |
| 1 | – | ● | – | – |
| 2 | – | – | ● | – |
| 3 | – | – | – | ● |
| 4 | – | ● | ● | – |
| 5 | – | ● | – | ● |
| 6 | – | – | ● | ● |
| 7 | – | ● | ● | ● |
Note 1) A pressure gauge with a full span of 0.4 MPa is attached.
Note 2) The oil-free specification is grease-free in the fluid-contacting areas.
(5) Unit Notation
| Code | Contents |
|---|---|
| No symbol | Unit used on product nameplate and pressure gauge is MPa |
| Z Note 1, 2) | Unit used on product nameplate and pressure gauge is psi |
| ZA Note 1, 3) | Digital pressure switch: with unit selection function (initial setting is MPa) |
Note 1) Under new Japanese measurement laws, this product is only available for sale outside of Japan (SI units are used in Japan).
Note 2) Digital pressure switch, which has the unit selection function, has a default setting of psi.
Note 3) Refers to digital pressure switch. Includes lead wire with connector (2 m).
(6) Digital Pressure Switch Output Specification
| Code | Contents |
|---|---|
| No symbol | None |
| N | NPN open collector |
| P | PNP open collector |
Note) For types with a digital pressure switch, the “pressure display function” as outlined in (3) Accessories is required. The electrical entry of the lead wire is positioned on the opposite side to the handle.
Specifications
| Model | ARM10 | ARM10F | |
|---|---|---|---|
| Regulator construction | Direct acting | ||
| Working principle (pressure receiving method) | Diaphragm-type | ||
| Relief mechanism | Standard | Relieving type | |
| Semi-standard | Non-relieving type | ||
| Backflow function Note 1) | Yes (unbalanced type) | ||
| IN side tubing outer diameter | ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø5/32 (diameter 5/32 mm), ø1/4 (diameter 1/4 mm) | ||
| OUT side tubing outer diameter | ø4 (diameter 4 mm), ø6 (diameter 6 mm), ø5/32 (diameter 5/32 mm), ø1/4 (diameter 1/4 mm) | ||
| Proof pressure | 1.5 MPa | ||
| Maximum operating pressure | 1.0 MPa | ||
| Set pressure range | Standard | 0.05 to 0.7 MPa | |
| Semi-standard | 0.05 to 0.35 MPa (low-pressure type) | ||
| Applicable fluids | Air | ||
| Ambient temperature and working fluid temperature Note 2) | 5 to 60°C | ||
| Weight | 60 g | 72 g | |
Note 1) When using the backflow function, a set pressure of at least 0.1 MPa is required.
Note 2) For the type with a digital pressure switch: 5 to 50°C.
Structural Drawings
ARM10 structural drawing
ARM10F structural drawing
Component Parts
| Number | Part name | Materials |
|---|---|---|
| 1 | Body | PBT |
| 2 | Bonnet | PBT |
| 3 | Handle | POM |
| 4 | Valve seat | POM |
| 5 | Pressure regulating screw assembly | Structural steel |
| 6 | Pressure regulator spring | Steel wire |
| 7 | Regulator clip | Stainless steel |
| 8 | Blanking plate assembly | – |
| 9 | Square nut | Steel strip |
Replacement Parts
| Number | Part name | Materials | Part number | Additional notes |
|---|---|---|---|---|
| A | Diaphragm assembly | Weather resistant NBR/POM | 136126A | Relieving type |
| 136126-1A | Non-relieving type | |||
| B | Valve | HNBR, aluminum alloy | 136127-30#1 | – |
| C | Valve spring | Stainless steel | 136131 | – |
| D | O-ring | NBR | 136146 | Standard product |
| HNBR | 136146-30 | Oil-free specification | ||
| E | O-ring | NBR | 136147 | Standard product |
| HNBR | 136147-30 | Oil-free specification | ||
| F | O-ring | NBR | 136148 | Standard product |
| HNBR | 136148-30 | Oil-free specification | ||
| NBR | KA01731 | Standard model for digital pressure switch | ||
| HNBR | KA01613 | Oil-free specification for digital pressure switch | ||
| G | Fitting assembly | – | See p. 745 in the manufacturer’s catalog | – |
Regulator – Single Unit Type, ARM10 Series Dimensions
ARM10-06/ARM10-08
(Unit: mm)
ARM10-06/ARM10-08 dimensional drawings
ARM10F1-06/ARM10F1-08
(Unit: mm)
ARM10F1-06/ARM10F1-08 dimensional drawings
ARM10F1-06GPC/ARM10F1-08GPC
(Unit: mm)
ARM10F1-06GPC/ARM10F1-08GPC dimensional drawings
Basic Information
| Regulator, Pressure Boosting Valve | Regulator | Regulator Type | Standard | Applicable Fluid | Air |
|---|---|---|---|---|---|
| Shape | One-Touch Coupling Type | Adverse Current Function | Presence (Imbalance Type) |
ARM10-06-1
ARM10-06-1Z
ARM10-06-2
ARM10-06-3
ARM10-06-4
ARM10-06-5
ARM10-06-6
ARM10-06-7
ARM10-06-7Z
ARM10-06B
ARM10-06B-1
ARM10-06B-1Z
ARM10-06B-2
ARM10-06B-3
ARM10-06B-4
ARM10-06B-4Z
ARM10-06B-5
ARM10-06B-6
ARM10-06B-7
ARM10-06BG
ARM10-06BG-1
ARM10-06BG-1-N
ARM10-06BG-1Z
ARM10-06BG-1Z-N
ARM10-06BG-1ZA-N
ARM10-06BG-5
ARM10-06BG-5-N
ARM10-06BG-6
ARM10-06BG-7
ARM10-06BG-7Z
ARM10-06BG-N
ARM10-06BG-P
ARM10-06BG-Z-N
ARM10-06BG-Z-P
ARM10-06BG-ZA-N
ARM10-06BG-ZA-P
ARM10-06G
ARM10-06G-1
ARM10-06G-1-N
ARM10-06G-1Z
ARM10-06G-1Z-N
ARM10-06G-1ZA-N
ARM10-06G-1ZA-P
ARM10-06G-2
ARM10-06G-2-N
ARM10-06G-2Z
ARM10-06G-2ZA-N
ARM10-06G-3
ARM10-06G-3ZA-P
ARM10-06G-4
ARM10-06G-5
ARM10-06G-6
ARM10F1-06-1
ARM10F1-06-3
ARM10F1-06-4
ARM10F1-06-5
ARM10F1-06-6
ARM10F1-06B
ARM10F1-06B-1
ARM10F1-06B-2
ARM10F1-06B-3
ARM10F1-06B-7
ARM10F1-06BG
ARM10F1-06BG-1
ARM10F1-06BG-1-N
ARM10F1-06BG-1Z
ARM10F1-06BG-2
ARM10F1-06BG-3
ARM10F1-06BG-5
ARM10F1-06BG-6
ARM10F1-06BG-7
ARM10F1-06BG-N
ARM10F1-06BG-Z-N
ARM10F1-06BG-ZA-N
ARM10F1-06BG-ZA-P
ARM10F1-06G
ARM10F1-06G-1
ARM10F1-06G-1-N
ARM10F1-06G-3
ARM10F1-06G-4
ARM10F1-06G-5
ARM10F1-06G-5-N
ARM10F1-06G-6
ARM10F1-06G-N
ARM10F1-06G-P
ARM10F1-06G-Z
ARM10F1-06G-ZA-N
ARM10F1-06G-ZA-P
ARM10F1-06GP
ARM10F1-06GP-1
ARM10F1-06GP-1Z
ARM10F1-06GP-1ZA-N
ARM10F1-06GP-2
ARM10F1-06GP-2ZA-N
ARM10F1-06GP-3
ARM10F1-06GP-4
ARM10F1-06GP-5
ARM10F1-06GP-6
ARM10F1-06GP-7
ARM10F1-06GP-N
ARM10F1-06GP-Z
ARM10F1-06GP-ZA-N
ARM10F1-06GP-ZA-P
ARM10F1-06GPC
ARM10F1-06GPC-1
ARM10F1-06GPC-2
ARM10F1-06GPC-3
ARM10F1-06GPC-4
Liên Hệ Medin Co., Ltd
- Công ty TNHH Mễ Đình được thành lập từ năm 2006.
- Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
- Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
- Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
- Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”
- Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
- Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.
👉 Công ty 𝐌𝐞𝐝𝐢𝐧 hỗ trợ:
𝑇𝑢̛ 𝑣𝑎̂́𝑛 𝑔𝑖𝑎̉𝑖 𝑝ℎ𝑎́𝑝 𝑡𝑜̂́𝑖 𝑢̛𝑢
𝐶𝑜́ 𝑠𝑎̆̃𝑛 𝑠𝑎̉𝑛 𝑝ℎ𝑎̂̉𝑚 𝑑𝑢̀𝑛𝑔 𝑡ℎ𝑢̛̉
𝐻𝑜̂̃ 𝑡𝑟𝑜̛̣ 𝑡𝑒𝑠𝑡 𝑡𝑎̣̂𝑛 𝑛𝑜̛𝑖
👉 Nếu bạn có bất kỳ yêu cầu nào, vui lòng liên hệ với chúng tôi.
☎️ Hotline: 0902782082
🌐 Website: https://www.medin.com.vn/
- 𝐕𝐏 𝐇𝐨 𝐂𝐡𝐢 𝐌𝐢𝐧𝐡: 01 Đường 410C, Phước Long A, Tp. Thủ Đức
- 𝐇𝐚 𝐍𝐨𝐢 𝐛𝐫𝐚𝐧𝐜𝐡: 562 Nguyễn Văn Cừ, Long Biên, Hà Nội
- 𝐃𝐚 𝐍𝐚𝐧𝐠 𝐛𝐫𝐚𝐧𝐜𝐡: 63 Phan Đăng Lưu, Hải Châu, Đà Nẵng
