Máy Sấy Khí SMC Air Dryer R134a (HFC) IDF IDF1E IDF2E IDF3E IDF4E IDF6E IDF8E IDF11E

Download

Máy Sấy Khí SMC Air Dryer R134a (HFC) IDF IDF1E IDF2E IDF3E IDF4E IDF6E IDF8E IDF11E IDF1E-10 IDF2E-10 IDF4E-20 IDF6E-10 IDF11E-10 IDF11E-20

Refrigerated Air Dryer, Refrigerant R134a (HFC) Standard Temperature Air Inlet, Series IDF□E Specifications – Máy Sấy Khí SMC

[Features] ・ Removes moisture from the moist compressed air sent from the compressor to prevent malfunction of pneumatic equipment due to moisture
・ Maximum processing air volume increased by 40%
・ Power consumption MAX 40% reduction
・ Energy saving design
・ Improved corrosion resistance by adopting stainless steel heat exchanger
・ By reducing the amount of exhaust heat by 25%, the increase in ambient temperature is suppressed (air-cooled specification), and the amount of heat radiation is reduced (Water-cooled)
・ Resistant to high temperature environment

Specifications				Model
				Standard-temperature air inlet
				IDF1E	IDF2E	IDF3E	IDF4E	IDF6E	IDF8E	IDF11E	IDF15E1
Operating range*3	Applicable fluid			Compressed air
	Inlet air temperature (°C)			5 to 50
	Inlet air pressure (MPa)			0.15 to 1.0
	Ambient temperature (humidity) (°C)			2 to 40 (Relative humidity of 85% or less)
*4	Air flow capacity m3/min	Standard condition (ANR)*1	50 Hz	0.10	0.20	0.32	0.52	0.75	1.22	1.65	2.8
			60 Hz	0.12	0.235	0.37	0.57	0.82	1.32	1.82	3.1
		Compressor intake condition*2	50 Hz	0.11	0.21	0.34	0.55	0.8	1.3	1.75	3.0
			60 Hz	0.13	0.25	0.39	0.61	0.87	1.4	1.93	3.3
	Inlet air pressure (MPa)			0.7
	Inlet air temperature (°C)			35
	Ambient temperature (°C)			32
	Outlet air pressure dew point (°C)			10
	Power supply voltage (frequency)*5			Single-phase: 100 V AC (50 Hz), 100/110 V AC (60 Hz)*5 Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz)
Electric specifications	Power consumption*6 (W) 50/60 Hz		Single-phase 100 V	180/202	180/202	180/202	180/202	180/202	208/236	385/440	420/480
			Single-phase 200 V	–	–
	Operating current*6 (A) 50/60 Hz		Single-phase 100 V	2.4/2.5	2.4/2.5	2.4/2.5	2.4/2.5	2.4/2.5	3.0/3.1	5.7/5.7	4.3/4.6
			Single-phase 200 V	–	–	1.2/1.3	1.2/1.3	1.2/1.3	1.5/1.5	3.4/3.0	3.4/3.1
Applicable circuit breaker capacity*7 (A) (Sensitivity current of 30 mA)				10 (100 V AC), 5 (200 V AC)							10 (100 V AC) 10 (200 V AC)
Condenser				Air-cooled
Refrigerant				R134a (HFC)
Refrigerant charge (kg)				0.07	0.115	0.15	0.18	0.20	0.25	0.26	0.35
Auto drain				Float type (Normally closed)	Float type (Normally open)
Port size				Rc 3/8			Rc1/2	Rc3/4			Rc1
Weight (kg)				16	17	18	22	23	27	28	46
Coating color				Body panel: urban white 1 Base: urban gray 2
Applicable compressor output (Reference) (kW) For screw type				0.75	1.5	2.2	3.7	5.5	7.5	11	15

*1: Indicates the air flow capacity under the standard condition (ANR) (atmospheric pressure 20°C, relative humidity 65%).
*2: Indicates the air flow capacity converted by the compressor intake condition (atmospheric pressure 32°C, relative humidity 75%).
*3: The operating range does not guarantee use at rated air flow capacity.
*4: If the operating conditions differ from the rating, select the model referring to “Model Selection” in the manufacturer’s catalog.
*5: Refer to “How to Order” in the manufacturer’s catalog when selecting the power supply voltage.
*6: These are reference values under the rated conditions and are not guaranteed. Do not use these as thermal setting values, etc.
*7: Products without option R do not come with a circuit breaker. Purchase a circuit breaker separately.

Structure Principle Diagram (Air/Refrigerant Circuit)

Humid, hot air coming into the air dryer is cooled down by a cooler (heat exchanger). Water condensed at this time is removed from the air by a drain separator (auto drain) and drained out automatically. Air separated from the water is heated by a re-heater (heat exchanger) to obtain the dried air, which goes through to the outlet side.