Máy Sấy Khí SMC Air Dryer IDF Series IDF22E IDF37E IDF55E

Download

Máy Sấy Khí SMC Air Dryer IDF Series IDF22E IDF37E IDF55E

Refrigerated Air Dryer, Refrigerant R407C (HFC) Standard Temperature Air Inlet, Series IDF□E Specifications – Máy Sấy Khí SMC

[Features] · Protects pneumatic equipment from moisture.
· Removes the vapor from the moist compressed air delivered by the compressor, and prevents it from causing the pneumatic equipment to fail.
· Air flow capacity increased up to 40%.
· Power consumption reduced up to 40%.
· Energy-saving design.
· Exhaust heat reduced by 25%, controlling increases in ambient temperature (air-cooled specification) and reducing heat discharging water amount (water-cooled specification).
· Inlet air temperature: 35°C (22E, 37E) / 40°C (55E, 75E).
· Outlet air pressure dew point: 10°C.

Specifications				Model
				Standard-temperature air inlet
				IDF22E	IDF37E	IDF55E	IDF75E
Operating range*3	Applicable fluid			Compressed Air
	Inlet air temperature (°C)			5 to 50
	Inlet air pressure (MPa)			0.15 to 1.0
	Ambient temperature (humidity) (°C)			2 to 40 (Relative humidity of 85% or less)
*4	Air flow capacity m3/min	Standard condition (ANR)*1	50 Hz	3.9	5.7	8.4	11.0
			60 Hz	4.3	6.1	9.8	12.4
		Compressor intake condition*2	50 Hz	4.1	6.1	8.9	11.7
			60 Hz	4.6	6.5	10.4	13.2
	Inlet air pressure (MPa)			0.7
	Inlet air temperature (°C)			35		40
	Ambient temperature (°C)			32
	Outlet air pressure dew point (°C)			10
	Power supply voltage (frequency)*5			Single-phase/Three-phase 200 V AC (50 Hz)*5 Single-phase/Three-phase 200/220 V AC (60 Hz)		Three-phase 200 V AC (50 Hz) Three-phase 200/220 V AC (60 Hz)
Electric specifications	Power consumption*6 (W) 50/60 Hz		Single-phase 200 V	810/940	810/940	–	–
			Three-phase 200 V	850/1,070	850/1,070	1,450/1,890	2,000/2,500
	Operating current*6 (A) 50/60 Hz		Single-phase 200 V	4.3/4.7	4.3/4.7	–	–
			Three-phase 200 V	3.3/3.5	3.3/3.5	6.0/6.6	7.2/8.0
Applicable circuit breaker capacity*7 (A) (Sensitivity current of 30 mA)				10 (200 V AC)			15 (200 V AC)
Condenser				Air-cooled
Refrigerant				R407C (HFC)
Refrigerant charge (kg)			Single-phase 200 V	0.42	0.73	–	–
			Three-phase 200 V	0.47	0.83	0.55	0.72
Auto drain				Float type (normally open)
Port size				R1	R1 1/2	R2
Weight (kg)				54	62	100	116
Coating color				Body panel: urban white 1 Base: urban gray 2
Applicable compressor output (Reference) (kW) For screw type				22	37	55	75

*1: Indicates the air flow capacity under the standard condition (ANR) (atmospheric pressure 20°C, relative humidity 65%).
*2: Indicates the air flow capacity converted by the compressor intake condition (atmospheric pressure 32°C, relative humidity 75%).
*3: The operating range does not guarantee use at rated air flow capacity.
*4: If the operating conditions differ from the rating, select the model referring to “Model Selection” in the manufacturer’s catalog.
*5: Refer to “How to Order” in the manufacturer’s catalog when selecting the power supply voltage.
*6: These are reference values under the rated conditions and are not guaranteed. Do not use these as thermal setting values, etc.
*7: Products without option R do not come with a circuit breaker. Purchase a circuit breaker separately.

Structure Principle Diagram (Air/Refrigerant Circuit)

Humid, hot air coming into the air dryer is cooled down by a cooler re-heater (heat exchanger). Water condensed at this time is drained out automatically by the auto drain. Air separated from the water is heated by a cooler re-heater (heat exchanger) to obtain the dried air, which goes through to the outlet side.

 

👉 Tham khảo thêm bài viết trên Fanpage
👉 Tham khảo thêm video tại kênh Youtube