5-Port Solenoid Valve Body Ported Single Unit SY7000 Series – Van Điện Từ SMC
Product Description
– Van Điện Từ SMC
SMC Solenoid Valve.
[Features]
· Power consumption: 0.1 W (with power saving circuit)
Download
5-Port Solenoid Valve, Body Ported Single Unit, SY7000 Series Specifications – Van Điện Từ SMC
| Series | SY7000 | |
|---|---|---|
| Usable Fluids | Air | |
| Internal Pilot Operating Pressure Range MPa |
2-position single | 0.15 to 0.7 |
| 2-position double | 0.1 to 0.7 | |
| 3 Position | 0.2 to 0.7 | |
| Ambient and fluid temperature (°C) | -10 to 50 (no freezing) | |
| Maximum operating frequency (Hz) | 2 Position Single, Double | 5 |
| 3 Position | 3 | |
| Manual Operation | Non-locking push type, push-turn locking type screwdriver-operated type, push-turn locking manual-operation type | |
| Pilot Exhaust Method | Main valve, pilot valve common exhaust type | |
| Lubrication | Not required | |
| Mounting Orientation | Free | |
| *Impact resistance/Vibration-resistance (m/s2) | 150/30 | |
| Enclosure | Dust-proof (*DIN terminal and M8 connector are IP65) | |
*Based on IEC60529.
*Impact resistance: No malfunctions after testing under the following conditions: in the axial direction and at a right angle to the main valve and armature in both energized and non-energized states (once for each condition state). (Initial value)
Vibration resistance: No malfunctions occurred in a 1-sweep test between 45 and 2,000 Hz. The test was performed in both energized and non-energized states and in the axial direction and at right angles to the main valve and armature. (Initial value)
Solenoid Specifications
| Electrical Entry | Grommet (G) (H) DIN terminal (D) (Y) L-type plug connector (L) M8 connector (W) M-type plug connector (M) |
|||
|---|---|---|---|---|
| G, H, L, M, W | D, Y | |||
| Coil rated voltage (V) | DC | 24, 12, 6, 5, 3 | 24, 12 | |
| AC 50/60 Hz | 100, 110, 200, 220 | |||
| Allowable Voltage Fluctuation | ±10% of rated voltage* | |||
| Power Consumption W | DC | Standard | 0.35 (with light: 0.4) [0.94 (with DIN terminal light: 0.45)] | |
| With power saving circuit | 0.1 (only with light) * [Startup 0.4, holding 0.1] |
|||
| *Apparent power (VA) | AC | 100 V | 0.78 (with light: 0.81) | 0.78 (with light: 0.87) |
| 110 V 115 V |
0.86 (with light: 0.89) [0.94 (with indicator light: 0.97)] |
0.86 (with light: 0.97) [0.94 (with light: 1.07)] |
||
| 200 V | 1.18 (with light: 1.22) | 1.15 (with light: 1.30) | ||
| 220 V [230 V] |
1.30 (with light: 1.34) [1.42 (with light: 1.46)] |
1.27 (with light: 1.46) [1.39 (with light: 1.60)] |
||
| Surge Voltage Suppressor | Diode (varistor for DIN terminal and non-polar type are ) | |||
| Indicator Light | LED (neon bulb for DIN terminal AC) | |||
- *The 110 V AC and 115 V AC types are interchangeable. The 220 V AC and 230 V AC types are also interchangeable.
- For 115 V AC and 230 V AC, the allowable voltage fluctuation is -15 to +5% of the rated voltage.
- *Energy-saving circuit not available with DIN terminal / M8 connector.
- For details, see the SMC catalog.
Response Time
*Standard type based on JIS B8419:2010 dynamic performance testing (Coil temperature 20°C, at rated voltage)
| Switching Method | Response Time ms (at 0.5 MPa) | ||
|---|---|---|---|
| Without light or surge voltage suppressor | With light and surge voltage suppressor | ||
| S, Z type | R, U type | ||
| 2-position single | 31 or less | 38 or less | 33 or less |
| 2-position double | 27 or less | 30 or less | 28 or less |
| 3 Position | 50 or less | 56 or less | 50 or less |
Flow Rate Characteristics / Weight Table
| Valve Model Numbers | Switching Method | Piping connection port diameter | Flow Rate Characteristics | Weight g | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1, 5, 3 (P, EA, EB) | 4, 2 (A, B) | 1 → 4/2 (P → A/B) | 4/2 → 5/3 (A/B → EA/EB) | Grommet | L, M plug connector | DIN terminal | W M8 connector | |||||||
| C (dm3 / [s·bar]) | b | Cv | C (dm3 / [s·bar]) | b | Cv | |||||||||
| SY7□20-□-02 | 2 Position | Single | 1 (P) port 1/4 5, 3 (EA, EB) port 1/8 |
1/4 | 4.1 | 0.23 | 0.93 | 3.3 | 0.33 | 0.81 | 101 | 104 | 125 | 108 |
| Double | 120 | 125 | 167 | 133 | ||||||||||
| 3 Position | Closed Center | 2.9 | 0.31 | 0.70 | 2.4 | 0.38 | 0.63 | 128 | 133 | 175 | 141 | |||
| Exhaust Center | 2.5 | 0.39 | 0.65 | 3.4 [2.1] |
0.35 [0.38] |
0.82 [0.54] |
||||||||
| Pressure Center | 4.3 [2.4] |
0.23 [0.32] |
0.97 [0.61] |
2.2 | 0.39 | 0.58 | ||||||||
| SY7□20-□-C8 | 2 Position | Single | C8 (ø8 [diameter 8 mm] single-action fitting) |
3.2 | 0.26 | 0.77 | 3.2 | 0.37 | 0.82 | 107 | 110 | 131 | 114 | |
| Double | 126 | 132 | 174 | 140 | ||||||||||
| 3 Position | Closed Center | 2.6 | 0.24 | 0.63 | 2.4 | 0.31 | 0.62 | 134 | 140 | 182 | 148 | |||
| Exhaust Center | 2.4 | 0.25 | 0.57 | 2.6 [1.9] |
0.42 [0.46] |
0.70 [0.56] |
||||||||
| Pressure Center | 3.3 [2.4] |
0.28 [0.22] |
0.78 [0.57] |
2.2 | 0.34 | 0.60 | ||||||||
| SY7□20-□-C10 | 2 Position | Single | C10 (ø10 (diameter 10 mm) single-action fitting) |
3.8 | 0.26 | 0.86 | 3.2 | 0.34 | 0.82 | 103 | 105 | 126 | 109 | |
| Double | 122 | 127 | 169 | 135 | ||||||||||
| 3 Position | Closed Center | 2.8 | 0.27 | 0.67 | 2.4 | 0.21 | 0.59 | 130 | 135 | 177 | 143 | |||
| Exhaust Center | 2.5 | 0.25 | 0.59 | 2.7 [2.0] |
0.38 [0.38] |
0.70 [0.56] |
||||||||
| Pressure Center | 3.8 [2.4] |
0.25 [0.31] |
0.89 [0.61] |
2.3 | 0.38 | 0.61 | ||||||||
*Values shown inside brackets are when at normal position.
SY7120-1D-02
SY7120-1D-02-F1
SY7120-1D-02-F2
SY7120-1D-02F-Q
SY7120-1D-02N
SY7120-1D-02N-F2
SY7120-1D-C8
SY7120-1D-C8-F1
SY7120-1D-C8-F2
SY7120-1D-C10
SY7120-1D-C10-F1
SY7120-1D-C10-F2
SY7120-1D-C10-Q
SY7120-1D-N11
SY7120-1DD-02
SY7120-1DD-02-F1
SY7120-1DD-02-F2
SY7120-1DD-C8
SY7120-1DD-C8-F1
SY7120-1D-02-F1
SY7120-1D-02-F2
SY7120-1D-02F-Q
SY7120-1D-02N
SY7120-1D-02N-F2
SY7120-1D-C8
SY7120-1D-C8-F1
SY7120-1D-C8-F2
SY7120-1D-C10
SY7120-1D-C10-F1
SY7120-1D-C10-F2
SY7120-1D-C10-Q
SY7120-1D-N11
SY7120-1DD-02
SY7120-1DD-02-F1
SY7120-1DD-02-F2
SY7120-1DD-C8
SY7120-1DD-C8-F1
SY7220-1D-02
SY7220-1D-02-F2
SY7220-1D-02-X90
SY7220-1D-02N-F2
SY7220-1D-C8
SY7220-1D-C8-F2
SY7220-1D-C8-F2-X20
SY7220-1D-C10
SY7220-1D-C10-F2
SY7220-1DD-02
SY7220-1DD-02-F2
SY7220-1DD-C8
SY7320-1D-02
SY7320-1D-02-F2
SY7320-1D-02-F2-Q
SY7320-1D-02-Q
SY7320-1D-02F
SY7320-1D-C8
SY7320-1D-C8-F2
SY7320-1D-C10
SY7320-1D-C10-F2
SY7320-1DD-02
SY7320-1DD-02-F2
SY7320-1DD-C8
SY7220-1D-02-F2
SY7220-1D-02-X90
SY7220-1D-02N-F2
SY7220-1D-C8
SY7220-1D-C8-F2
SY7220-1D-C8-F2-X20
SY7220-1D-C10
SY7220-1D-C10-F2
SY7220-1DD-02
SY7220-1DD-02-F2
SY7220-1DD-C8
SY7320-1D-02
SY7320-1D-02-F2
SY7320-1D-02-F2-Q
SY7320-1D-02-Q
SY7320-1D-02F
SY7320-1D-C8
SY7320-1D-C8-F2
SY7320-1D-C10
SY7320-1D-C10-F2
SY7320-1DD-02
SY7320-1DD-02-F2
SY7320-1DD-C8
SY7420-1D-02
SY7420-1D-02-F2
SY7420-1D-C8
SY7420-1D-C8-F2
SY7420-1D-C10
SY7420-1D-C10-F2
SY7420-1DD-02
SY7420-1DD-02-F2
SY7420-1DD-C8
SY7420-1DD-C8-F2
SY7420-1DD-C10
SY7420-1DD-C10-F2
SY7420-1DE-02
SY7420-1DE-02-F2
SY7420-1DE-C8
SY7420-1DE-C8-F2
SY7420-1DE-C10
SY7420-1DE-C10-F2
SY7420-1DO-02
SY7420-1D-02-F2
SY7420-1D-C8
SY7420-1D-C8-F2
SY7420-1D-C10
SY7420-1D-C10-F2
SY7420-1DD-02
SY7420-1DD-02-F2
SY7420-1DD-C8
SY7420-1DD-C8-F2
SY7420-1DD-C10
SY7420-1DD-C10-F2
SY7420-1DE-02
SY7420-1DE-02-F2
SY7420-1DE-C8
SY7420-1DE-C8-F2
SY7420-1DE-C10
SY7420-1DE-C10-F2
SY7420-1DO-02
SY7520-1D-02
SY7520-1D-02-F2
SY7520-1D-C8
SY7520-1D-C8-F2
SY7520-1D-C10
SY7520-1D-C10-F2
SY7520-1DD-02
SY7520-1DD-02-F2
SY7520-1DD-C8
SY7520-1DD-C8-F2
SY7520-1DD-C10
SY7520-1DD-C10-F2
SY7520-1DE-02
SY7520-1DE-02-F2
SY7520-1DE-C8
SY7520-1DE-C8-F2
SY7520-1DE-C10
SY7520-1DE-C10-F2
SY7520-1DO-02
SY7520-1DO-02-F2
SY7520-1DO-C8
SY7520-1D-02-F2
SY7520-1D-C8
SY7520-1D-C8-F2
SY7520-1D-C10
SY7520-1D-C10-F2
SY7520-1DD-02
SY7520-1DD-02-F2
SY7520-1DD-C8
SY7520-1DD-C8-F2
SY7520-1DD-C10
SY7520-1DD-C10-F2
SY7520-1DE-02
SY7520-1DE-02-F2
SY7520-1DE-C8
SY7520-1DE-C8-F2
SY7520-1DE-C10
SY7520-1DE-C10-F2
SY7520-1DO-02
SY7520-1DO-02-F2
SY7520-1DO-C8
