Heatless Air Dryer ID20/ID30/ID40/ID60
Product Description
Heatless air dryer that is ideal for applications that require dry air with a low dew point.
[Features]
· Supplies dry air with a low dew point of -30°C or less.
· Small and lightweight without heater and electric control panel.
· Use the indicator to check the outlet dew point. (Self-regenerative type enables easy maintenance.)
· Standard size: 20, 30, 40, 60.
· Thread type: Rc, G, NPT.
· Single-phase: 100 V AC (50 Hz), 100/110 V AC (60 Hz), Single-phase: 110 V AC (50 Hz).
· Single-phase: 200 V AC (50 Hz), 200/220 V AC (60 Hz), Single-phase: 220 V AC (50 Hz).
Download
Heatless Air Dryer ID Series Specifications
ID400 external appearance
ID200 external appearance
*The external appearance images are of representational models.
Model
| Model | ID20□ | ID30□ | ID40□ | ID60□ |
|---|---|---|---|---|
| Outlet air flow rate L/min (ANR) | 80 | 155 | 330 | 780 |
| Recycled air flow rate L/min (ANR)* | 20 | 37 | 85 | 195 |
| Inlet air flow rate L/min (ANR) | 100 | 192 | 415 | 975 |
| Port size (Nominal size B) | 1/4 | 1/2 | 1/2 | 3/4 |
| Weight (kg) | 7 | 8.5 | 18.5 | 25 |
*: Inlet air pressure at 0.7 MPa
Specifications
| Model | ID20□ | ID30□ | ID40□ | ID60□ |
|---|---|---|---|---|
| Applicable fluid | Compressed Air | |||
| Operating pressure (MPa) | 0.3 to 1.0 | 0.3 to 0.9 | ||
| Inlet air temperature (°C) | 5 to 50 | |||
| Ambient temperature (°C) | 2 to 50 | |||
| Power supply voltage | See “How to Order” in the manufacturer’s catalog. | |||
| Power consumption | 30 W | |||
| Installation location | Indoors | |||
Note) Inlet air pressure: 0.7 MPa, Inlet air temperature: 35°C, Outlet air dew point: -30°C
Structure Principle Diagram
Structure Principle Diagram
The compressed air that flows in from the IN side passes through the 4-way solenoid valve, and after it is dehumidified at adsorption cylinder T1, it turns into dry air and exits from the OUT side. Meanwhile, a portion of the dry air passes through orifice O2, reactivates the adsorption agent at adsorption cylinder T2, and together with the moisture, passes through the solenoid valve and is released to the atmosphere. Conversely, due to the operation of the switching valve that occurs after a certain length of time, T1 becomes reactivated and T2 assumes the adsorption state. This process is repeated to continuously provide dry air.
Operating System Diagram
Operating System Diagram
Time Chart
Time Chart
