Refrigerated Air Dryer, Refrigerant R407C (HFC), IDF100FS/125FS/150FS Series – Máy Sấy Khí SMC

Download

Refrigerant R407C (HFC) IDF100FS, IDF125FS, IDF150FS Series Specifications – Máy Sấy Khí SMC

Standard Specifications

Specifications				Model
				IDF100FS-30	IDF125FS-30	IDF150FS-30
Operating range*1	Applicable fluid			Compressed Air
	Inlet air temperature (°C)			5 to 60
	Inlet air pressure (MPa)			0.15 to 1.0 / 0.15 to 1.6 (option K)
	Ambient temperature (humidity) (°C)			2 to 45 (Relative humidity of 85% or less)
Outlet air pressure dew point set range*2, *3) (°C)				10 to 30
Rated conditions	Air flow capacity m3/min	Standard condition (ANR)*4	50 Hz	16	20.1	25
			60 Hz	18.8	23.7	27
		Compressor intake condition*5	50 Hz	16.7	20.9	26
			60 Hz	19.6	24.7	28.1
	Inlet air pressure (MPa)			0.7
	Inlet air temperature (°C)			40
	Ambient temperature (°C)			32
	Outlet air pressure dew point*6 (°C)			10
	Exhaust heat from condenser (50/60 Hz) (kW)			7.5/8.7	9.2/10.8	10.4/12.4
Electric specifications	Power supply voltage (frequency)*7			Three-phase 200 V AC (50 Hz) / 200/220 V AC (60 Hz)
	Power consumption (50/60 Hz)*8 (kW)			2.8/3.3	3.8/4.5	3.8/4.5
	Operating current (50/60 Hz)*8 (A)			8.9/9.9	13.0/14.5	13.0/14.5
Applicable circuit breaker capacity*9 (A)				20	30
Condenser				Air-cooled
Refrigerant				R407C (HFC)
Refrigerant charge (kg)				1.38	1.46	1.98
Auto drain				Heavy-duty auto drain (normally open)
Port size				R2	JIS flange 65A/10K	JIS flange 80A/10K
Weight (kg)				228	255	340
Coating color				Body panel: urban white 1 Base: urban gray 2
Applicable compressor output (Reference) For screw type (kW)				100	125	150

*1: The operating range does not guarantee use at the rated air flow capacity. If the operating conditions differ from the rated conditions, select the model referring to “Model Selection” in the manufacturer’s catalog.
*2: This function is used to reduce the energy consumption of the dryer operation by changing the outlet air pressure dew point depending on the season and operating environment. As this is not a function for the purpose of setting the dew point of the outlet air pressure to the required dew point, the offset and stability of the dew point of the outlet air pressure are not guaranteed.
*3: It is not possible to set the dew point of the outlet air pressure higher than the dew point of the inlet air pressure. (This dryer does not have a humidifying function.) When the load (e.g. air flow rate, inlet air temperature) is small, the dew point of the outlet air pressure may be lower than the set dew point. When the load (e.g. air flow rate, inlet air temperature) is large, the dew point of the outlet air pressure may not decrease to the set dew point.
*4: Indicates the air flow capacity under the standard condition (ANR) (at 20°C, atmospheric pressure, relative humidity 65%).
*5: Indicates the air flow capacity converted by the compressor intake condition (at 32°C, atmospheric pressure).
*6: The dew point of the outlet air pressure shown in this table is the value that is obtained when the air flow rate, inlet air temperature, inlet air pressure and ambient temperature are stable. The stated dew point of the outlet air pressure may not be obtained in an unstable condition, such as soon after compressed air is supplied.
*7: The voltage fluctuation should be maintained within ±10% of the rated voltage.
*8: Value with a power supply voltage of 200 V.
*9: Install an earth leakage breaker with a sensitivity 30 mA.

Structure Principle Diagram (Air/Refrigerant Circuit)