Flow Sensor PFMV5 Series – Cảm Biến Áp Suất SMC
Product Description
– Cảm Biến Áp Suất SMC
Flex resistant cable specification flow sensor.
[Features]
・ Confirmation of adsorption of minute workpiece
・ Repeat accuracy ±2%F.S.
・ Response speed 5 ms or less, pressure resistance 500 kPa
・ Lubrication-free
・ It reduces piping space. Space saving installation is possible because there is no need to install a straight pipe section
[Applications]
・ Adsorption confirmation of minute workpiece, simple leak test are possible, simple seating confirmation is possible
Download
Specifications of Flow Sensor PFMV5 Series – Cảm Biến Áp Suất SMC
External appearance of PFMV5 Series
Application of PFMV5 Series
- Confirmation of suction of small parts
- Suitable for small nozzles
- It can detect nozzle clogging and crushing
- The sensor is installed as a manifold
- Sensors can be mounted near the pad
- It is possible to easily check the presence or absence of pinholes in molded products
- Seating can be confirmed depending on the flow rate
Dimensions
(Units: mm)
Dimensional drawing of PFM5 Series
* When piping the flow sensor, use a wrench on the specified body part. Fitting tightening torque: 1.0 to 1.5 N·m
Dimensional drawing of one side bracket attached
Dimensional drawing of both side brackets attached
* The dimensional drawing is for PFMV5□□-1, but the same dimensions apply for PFMV5□□F-1.
Specifications
| Model | PFMV505 | PFMV510 | PFMV530 | PFMV505F | PFMV510F | PFMV530F | |
|---|---|---|---|---|---|---|---|
| Fluid | Dry air, N2 (Air quality classes are JIS B 8392-1 1.1.2 to 1.6.2:2003, ISO8573-1 1.1.2 to 1.6.2) |
||||||
| Rated flow rate range (flow range) *1) | 0 to 0.5 L/min | 0 to 1 L/min | 0 to 3 L/min | -0.5 to 0.5 L/min *2) | -1 to 1 L/min *2) | -3 to 3 L/min *2) | |
| Accuracy | ±5% F.S. *3) | ||||||
| Repeatability | ±2% F.S. *3) | ||||||
| Pressure characteristics (0 kPa reference *4)) | ±2%F.S. (0 to 300 kPa) ±5%F.S. (-70 to 0 kPa) |
||||||
| Temperature characteristics (reference: 25°C) | ±2%F.S. (15 to 35℃) ±5%F.S. (0 to 50℃) |
||||||
| Rated pressure range *5) | -70 kPa to 300 kPa | ||||||
| Operating pressure range *6) | -100 kPa to 400 kPa | ||||||
| Withstand pressure | 500 kPa | ||||||
| Analog Output (Non-linear output) | Output voltage: 1 to 5 V, output impedance: Approx. 1 kΩ | ||||||
| Response Time | 5 ms or less (90% response) | ||||||
| Power supply voltage | 12 to 24 V DC ±10% (with polarity protection) | ||||||
| Current Consumption | 16 mA or less | ||||||
| Environment | Protective Enclosure | IP40 | |||||
| Operating Fluid Temperature | 0 to 50℃ (No freezing or condensation) | ||||||
| Operating temperature range | 0 to 50℃ (No freezing or condensation) | ||||||
| Storage temperature range | -10 to 60℃ (No freezing or condensation) | ||||||
| Operating Humidity Range | 35 to 85%R.H. (No condensation) | ||||||
| Storage Humidity Range | 35 to 85%R.H. (No condensation) | ||||||
| Withstand Voltage | 1,000 V AC for 1 min. between terminals and housing | ||||||
| Insulation Resistance | 50 MΩ or more (500 V DC measured via insulation resistance tester) between terminals and housing | ||||||
| Port Size | M5 × 0.8 (Tightening torque: 1 to 1.5 N⋅m) | ||||||
| Wetted parts material | PPS,Si,Au,SUS316,C3604 (Electrolytic nickel plating) | ||||||
| Standards | CE UL,CSA | ||||||
| Lead | 3 core vinyl flexible cable ø2.6 (diameter: 2.6 mm), 0.15 mm^2, 2 m | ||||||
| Weight | 10 g (It does not include lead) | ||||||
*1) Flow rates described in the specifications are the values at standard condition.
*2) The analog output shows 3 V when the flow rate is 0, changes to 5 V when the flow direction is from IN to OUT, and changes to 1 V when the direction is from OUT to IN.
*3) % F.S. in the table is based on the full scale of analog 4 V (1-5 V).
*4) 0 kPa means open air.
*5) It indicates the pressure range that satisfies the product specifications.
*6) It indicates the operable pressure range.
*7) Please contact the manufacturer for wiring.
*8) Even in striving to improve the quality, products may have small scratches, smears or variations in display color and brightness, etc., that do not affect the performance, verified as conforming products.
PFMV505-1-A
PFMV505-1-N
PFMV505-1-NA
PFMV505F-1
PFMV505F-1-A
PFMV505F-1-N
PFMV505F-1-NA
PFMV510-1
PFMV510-1-N
PFMV510-1-NA
PFMV510F-1
PFMV510F-1-A
PFMV510F-1-N
PFMV510F-1-NA
PFMV530-1
PFMV530-1-A
PFMV530-1-NA
PFMV530F-1
PFMV530F-1-A
PFMV530F-1-N
PFMV530F-1-NA
ZFC050-M5X68
ZS-36-A1
ZS-36-A5
