Mist Separator AFM20 to AFM40-A/Micro Mist Separator AFD20 to AFD40-A – Bộ lọc khí SMC
Product Description
– Bộ lọc khí SMC
Energy-saving Mist Separator AFM and Micro-Mist Separator AFD.
[Features]
· Improved visibility and environmental resistance.
· The bowl is completely covered by transparent bowl guard.
Download
Mist Separator AFM & Micro-Mist Separator AFD: Details – Bộ lọc khí SMC
AFM20-A: product images
AFD40-A: product images
Mist Separator AFM & Micro-Mist Separator AFD: Specifications Examples
Model Number Notation
Model number example
| – | Code | Contents | (1) | |||||
|---|---|---|---|---|---|---|---|---|
| Body size | ||||||||
| 20 | 30 | 40 | ||||||
| (2) | Screw Type | No symbol | Rc | ● | ● | ● | ||
| N Note 1) | NPT | ● | ● | ● | ||||
| F Note 2) | G | ● | ● | ● | ||||
| (3) | Piping connection port diameter | 01 | 1/8 | ● | – | – | ||
| 02 | 1/4 | ● | ● | ● | ||||
| 03 | 3/8 | – | ● | ● | ||||
| 04 | 1/2 | – | – | ● | ||||
| 06 | 3/4 | – | – | ● | ||||
| (4) | Option | a | Mounting | No symbol | Without optional mounting parts | ● | ● | ● |
| B Note 3) | With Bracket | ● | ● | ● | ||||
| b | Float type auto drain | No symbol | Without auto drain | ● | ● | ● | ||
| C Note 4) | N.C. (Normally Closed) Drain port is closed when no pressure is applied | ● | ● | ● | ||||
| D Note 5) | N.O. (Normally Open) Drain port is open when no pressure is applied | – | ● | ● | ||||
| (5) | Semi-standard | c | Bowl Note 6) | No symbol | Polycarbonate bowl | ● | ● | ● |
| 2 | Metal bowl | ● | ● | ● | ||||
| 6 | Nylon bowl | ● | ● | ● | ||||
| 8 | Metal bowl with level gauge | – | ● | ● | ||||
| C | With bowl guard | ● | –Note 7) | –Note 7) | ||||
| 6C | With bowl guard (nylon bowl) | ● | –Note 8) | –Note 8) | ||||
| d | Drain exhaust port Note 12) | No symbol | With drain cock | ● | ● | ● | ||
| J Note 9) | Drain guide 1/8 | ● | – | – | ||||
| Drain guide 1/4 | – | ● | ● | |||||
| W Note 13) | Drain cock with barb fitting (ø6 [diameter 6 mm] × ø4 [diameter 4 mm] for nylon tubes) | – | ● | ● | ||||
| e | Flow direction | No symbol | Flow direction: left → right | ● | ● | ● | ||
| R | Flow direction: right → left | ● | ● | ● | ||||
| f | Pressure unit | No symbol | Name plate and bowl caution plate units: MPa | ● | ● | ● | ||
| Z Note 10) | Name plate and bowl caution plate units: psi, °F | ○ Note 11) | ○ Note 11) | ○ Note 11) | ||||
- *Note 1) The drain guide is NPT1/8 (applicable to the AFM20-A, AFD20-A); and NPT1/4 (applicable to the AFM30-A, AFM40-A / AFD30-A, AFD40-A). The auto drain port comes with a ø3/8 (diameter 3/8 mm) one-touch fitting (applicable to the AFM30-A, AFM40-A / AFD30-A, AFD40-A).
- *Note 2) The drain guide is G1/8 (applicable to the AFM20-A, AFD20-A); and G1/4 (applicable to the AFM30-A, AFM40-A / AFD30-A, AFD40-A).
- *Note 3) Brackets are not assembled and are supplied loose at the time of shipment. Mounting screws (2 pcs.) included.
- *Note 4) When pressure is not applied, condensate which does not start the auto drain mechanism will remain in the drain bowl. Therefore manual release before ending operations is recommended.
- *Note 5) If the compressor used is small (0.75 kW, discharge flow rate is less than 100 L/min [ANR]), air leakage from the drain cock may occur when operations start. As such an N.C. type is recommended.
- *Note 6) For chemical resistance of the bowl, refer to the table below “Effects of atmosphere of organic solvents and chemicals and where these elements are likely to adhere to the equipment. Chemical data for substances causing degradation (Reference).”
- *Note 7) A bowl guard is provided as standard (polycarbonate).
- *Note 8) A bowl guard is provided as standard (nylon).
- *Note 9) Does not include a valve function.
- *Note 10) Thread type: NPT is applicable. Under new Japanese measurement laws, this product is only available for sale outside of Japan (SI units are used in Japan).
- *Note 11) ○ is for thread type NPT only.
- *Note 12) Float type auto drain: Cannot be selected in combination with C, D.
- *Note 13) Metal bowl: Cannot be selected in combination with 2, 8.
Effects of atmosphere of organic solvents and chemicals and where these elements are likely to adhere to the equipment. Chemical data for substances causing degradation (Reference)
| Type | Chemical name | Application examples | Materials | |
|---|---|---|---|---|
| Polycarbonate | Nylon | |||
| Acid | Hydrochloric acid Sulfuric acid, Phosphoric acid Chromic acid |
Acid washing liquid for metals | Possible use | × |
| Alkaline | Sodium hydroxide (caustic soda) Potassium hydroxide Calcium hydroxide Ammonia water Sodium carbonate |
Degreasing of metals Industrial salts Water-soluble cutting oil |
× | ○ |
| Inorganic salts | Sodium sulfide Potassium nitrate Sodium sulfate |
– | × | Possible use |
| Chlorinated solvents | Carbon tetrachloride Chloroform Ethylene chloride Methylene chloride |
Cleansing liquid for metals Printing ink Dilution |
× | Possible use |
| Aromatic series | Benzene Toluene Paint thinner |
Coatings Dry cleaning |
× | Possible use |
| Ketone | Acetone Methyl ethyl ketone Cyclohexane |
Photographic film Dry cleaning Textile industries |
× | × |
| Alcohol | Ethyl alcohol IPA Methyl alcohol |
Antifreeze Adhesive |
Possible use | × |
| Oil | Gasoline Kerosene |
– | × | ○ |
| Ester | Phthalic acid dimethyl Phthalic acid diethyl Acetic acid |
Synthetic oil Anti-rust additives |
× | ○ |
| Ether | Methyl ether Ethyl ether |
Brake oil additives | × | ○ |
| Amino | Methyl amino | Cutting oil Brake oil additives Rubber accelerator |
× | × |
| Other | Thread-lock fluid Seawater Leak tester |
– | × | Possible use |
○: Essentially safe △: Some effects may occur ×: Effects will occur
- *When the above factors are present, or if there is some doubt, use a metal bowl for safety.
Standard specification
| Model | AFM20-A AFD20-A |
AFM30-A AFD30-A |
AFM40-A AFD40-A |
AFM40-06-A AFD40-06-A |
|
|---|---|---|---|---|---|
| Connection port size | 1/8, 1/4 | 1/4, 3/8 | 1/4, 3/8, 1/2 | 3/4 | |
| Applicable fluids | Air | ||||
| Ambient temperature and working fluid temperature | -5 to 60°C (no freezing) | ||||
| Proof pressure | 1.5 MPa | ||||
| Maximum operating pressure | 1.0 MPa | ||||
| Minimum operating pressure | 0.05 MPa | ||||
| Filtration | AFM20-A to AFM40-06-A | 0.3 μm (filtration efficiency 99.9%) | |||
| AFD20-A to AFD40-06-A | 0.01 μm (filtration efficiency 99.9%) | ||||
| Oil mist density at outlet side | AFM20-A to AFM40-06-A | MAX 1.0 mg/m3 (ANR) (≒0.008 ppm) Note 2) Note 3) | |||
| AFD20-A to AFD40-06-A | MAX 0.1 mg/m3 (ANR) before saturated with oil, 0.01 mg/m3 (ANR) or less (≒0.008 ppm) Note 2) Note 3) | ||||
| Rated flow (L/min [ANR]) Note 1) | AFM20-A to AFM40-06-A | 200 | 450 | 1,100 | |
| AFD20-A to AFD40-06-A | 120 | 240 | 600 | ||
| Drain capacity (cm3) | 8 | 25 | 45 | ||
| Case materials | Polycarbonate | ||||
| Bowl guard | Semi-standard (steel) | Standard equipment (polycarbonate) | |||
| Weight (kg) | 0.09 | 0.19 | 0.38 | 0.43 | |
- *Note 1) Conditions – Inlet pressure is 0.7 MPa. The rated flow varies according to the inlet pressure. Keep the air flow within the rated flow to prevent an outflow of oil to the outlet side.
- *Note 2) At compressor discharge concentration 30 mg/m3 (ANR)
- *Note 3) The bowl seal and other O-rings use a small amount of grease.
Structural Drawings
AFM20-A/AFD20-A: structural drawings
AFM30-A to AFM40-06-A / AFD30-A to AFD40-06-A structural drawings
Component Parts
| Number | Part name | Materials | Model | Additional notes |
|---|---|---|---|---|
| 1 | Body | Die-cast aluminum | AFM20-A to AFM40-06-A AFD20-A to AFD40-06-A |
Urban white |
Replacement Parts
| Number | Part name | Materials | Part number | ||||
|---|---|---|---|---|---|---|---|
| AFM20-A AFD20-A |
AFM30-A AFD30-A |
AFM40-A AFD40-A |
AFM40-06-A AFD40-06-A |
||||
| 2 | Element assembly | AFM20 to 40 | – | AFM20P-060AS | AFM30P-060AS | AFM40P-060AS | |
| AFD20 to 40 | – | AFD20P-060AS | AFD30P-060AS | AFD40P-060AS | |||
| 3 | Bowl seal | NBR | C2SFP-260S | C32FP-260S | C42FP-260S | ||
| 4 | Bowl assembly Note) | Polycarbonate | C2SF-A | C3SF-A | C4SF-A | ||
- *Note) Bowl seal is included. Units displayed: Please check separately with the manufacturer with regard to the supply of bowl assemblies with psi, °F units.
Mist Separator AFM, Micro-Mist Separator AFD: Dimensions
AFM20-A/AFD20-A
AFM20-A/AFD20-A dimensional drawings
AFM30-A to AFM40-06-A / AFD30-A to AFD40-06-A
AFM30-A to AFM40-06-A / AFD30-A to AFD40-06-A: dimensional drawings
(Unit: mm)
| Model | Standard specification | Option specification | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bracket mounting dimensions | With auto drain | ||||||||||||||||
| P | A | B | C | D | E | G | J | M | N | Q | R | S | T | U | V | B | |
| AFM20-A/AFD20-A | 1/8, 1/4 | 40 | 87.6 | 9.8 | 20 | – | 40 | 20 | 30 | 27 | 22 | 5.4 | 8.4 | 40 | 2.3 | 28 | 104.9 |
| AFM30-A/AFD30-A | 1/4, 3/8 | 53 | 115.1 | 14 | 26.7 | 30 | 50 | 26.7 | 41 | 35 | 23 | 6.5 | 13 | 53 | 2.3 | 30 | 156.8 |
| AFM40-A/AFD40-A | 1/4, 3/8, 1/2 | 70 | 147.1 | 18 | 35.5 | 38.4 | 75 | 35.5 | 50 | 52 | 26 | 8.5 | 12.5 | 70 | 2.3 | 35 | 186.9 |
| AFM40-06-A/AFD40-06-A | 3/4 | 75 | 149.1 | 20 | 35.5 | 38.4 | 75 | 35.5 | 50 | 52 | 25 | 8.5 | 12.5 | 70 | 2.3 | 34 | 188.9 |
(Unit: mm)
| Model | Semi-standard specifications | |||||
|---|---|---|---|---|---|---|
| With barb fitting | With drain guide | Metal bowl | Metal bowl with drain guide | Metal bowl with level gauge | Metal bowl with drain guide with level gauge | |
| B | B | B | B | B | B | |
| AFM20-A/AFD20-A | – | 91.4 | 87.4 | 93.9 | – | – |
| AFM30-A/AFD30-A | 123.6 | 121.9 | 117.6 | 122.1 | 137.6 | 142.1 |
| AFM40-A/AFD40-A | 155.6 | 153.9 | 149.6 | 154.1 | 169.6 | 174.1 |
| AFM40-06-A/AFD40-06-A | 157.6 | 155.9 | 151.6 | 156.1 | 171.6 | 176.1 |
Basic Information
| Compressed Air Quality | General Dry Air | Operating Environment | Standard |
|---|
AFD20-01-2-A
AFD20-01-2R-A
AFD20-01-6-A
AFD20-01-6R-A
AFD20-01-A
AFD20-01-A-X2141
AFD20-01-C-A
AFD20-01-CR-A
AFD20-01-J-A
AFD20-01-R-A
AFD20-01B-2-A
AFD20-01B-2R-A
AFD20-01B-6-A
AFD20-01B-6C-A
AFD30-02-2-A
AFD30-02-2J-A
AFD30-02-2JR-A
AFD30-02-2R-A
AFD30-02-6-A
AFD30-02-6J-A
AFD30-02-6R-A
AFD30-02-6W-A
AFD30-02-8-A
AFD30-02-A
AFD30-02-A-X2141
AFD30-02-J-A
AFD30-02-R-A
AFD30-02-RW-A
AFD20-01-2R-A
AFD20-01-6-A
AFD20-01-6R-A
AFD20-01-A
AFD20-01-A-X2141
AFD20-01-C-A
AFD20-01-CR-A
AFD20-01-J-A
AFD20-01-R-A
AFD20-01B-2-A
AFD20-01B-2R-A
AFD20-01B-6-A
AFD20-01B-6C-A
AFD30-02-2-A
AFD30-02-2J-A
AFD30-02-2JR-A
AFD30-02-2R-A
AFD30-02-6-A
AFD30-02-6J-A
AFD30-02-6R-A
AFD30-02-6W-A
AFD30-02-8-A
AFD30-02-A
AFD30-02-A-X2141
AFD30-02-J-A
AFD30-02-R-A
AFD30-02-RW-A
AFD40-02-2-A
AFD40-02-2R-A
AFD40-02-A
AFD40-02-A-X2141
AFD40-02-J-A
AFD40-02-R-A
AFD40-02-RW-A
AFD40-02-W-A
AFD40-02B-2-A
AFD40-02B-6R-A
AFD40-02B-8R-A
AFD40-02B-A
AFD40-02B-A-X64
AFD40-02B-A-X2141
AFM20-01-2-A
AFM20-01-2-A-X2141
AFM20-01-2J-A
AFM20-01-2R-A
AFM20-01-6-A
AFM20-01-6C-A
AFM20-01-6R-A
AFM20-01-A
AFM20-01-A-X2141
AFM20-01-C-A
AFM20-01-CR-A
AFM20-01-J-A
AFM20-01-R-A
AFM20-01B-2-A
AFM20-01B-2J-A
AFD40-02-2R-A
AFD40-02-A
AFD40-02-A-X2141
AFD40-02-J-A
AFD40-02-R-A
AFD40-02-RW-A
AFD40-02-W-A
AFD40-02B-2-A
AFD40-02B-6R-A
AFD40-02B-8R-A
AFD40-02B-A
AFD40-02B-A-X64
AFD40-02B-A-X2141
AFM20-01-2-A
AFM20-01-2-A-X2141
AFM20-01-2J-A
AFM20-01-2R-A
AFM20-01-6-A
AFM20-01-6C-A
AFM20-01-6R-A
AFM20-01-A
AFM20-01-A-X2141
AFM20-01-C-A
AFM20-01-CR-A
AFM20-01-J-A
AFM20-01-R-A
AFM20-01B-2-A
AFM20-01B-2J-A
AFM30-02-2-A
AFM30-02-2J-A
AFM30-02-2JR-A
AFM30-02-2R-A
AFM30-02-6-A
AFM30-02-6J-A-X64
AFM30-02-6R-A
AFM30-02-6W-A
AFM30-02-8-A
AFM30-02-8R-A
AFM30-02-A
AFM30-02-A-X2141
AFM30-02-J-A
AFM30-02-JR-A
AFM30-02-R-A
AFM40-02-2-A
AFM40-02-2R-A
AFM40-02-6-A
AFM40-02-6J-A-X64
AFM40-02-6R-A
AFM40-02-8-A
AFM40-02-A
AFM40-02-A-X64
AFM40-02-A-X2141
AFM40-02-J-A
AFM40-02-R-A
AFM40-02-RW-A
AFM40-02-W-A
AFM40-02B-2-A
AFM40-02B-2R-A
AFM30-02-2J-A
AFM30-02-2JR-A
AFM30-02-2R-A
AFM30-02-6-A
AFM30-02-6J-A-X64
AFM30-02-6R-A
AFM30-02-6W-A
AFM30-02-8-A
AFM30-02-8R-A
AFM30-02-A
AFM30-02-A-X2141
AFM30-02-J-A
AFM30-02-JR-A
AFM30-02-R-A
AFM40-02-2-A
AFM40-02-2R-A
AFM40-02-6-A
AFM40-02-6J-A-X64
AFM40-02-6R-A
AFM40-02-8-A
AFM40-02-A
AFM40-02-A-X64
AFM40-02-A-X2141
AFM40-02-J-A
AFM40-02-R-A
AFM40-02-RW-A
AFM40-02-W-A
AFM40-02B-2-A
AFM40-02B-2R-A
