DULCOTEST sensors for conductivity ProMinent
Thang đo có vạch chia từ 0,01 µS/cm – 2.000 mS/cm
Cảm biến độ dẫn điện cho việc tích hợp quy trình tối ưu: Cảm biến DULCOTEST đáp ứng nhiều yêu cầu đo lường và cho phép đạt được giải pháp tốt nhất cho bất kỳ nhiệm vụ đo lường nào.
| Catalog | |
 |
DULCOTEST sensors for conductivity ProMinent
Thang đo có vạch chia từ 0,01 µS/cm – 2.000 mS/cm
Cảm biến độ dẫn điện cho việc tích hợp quy trình tối ưu: Cảm biến DULCOTEST đáp ứng nhiều yêu cầu đo lường và cho phép đạt được giải pháp tốt nhất cho bất kỳ nhiệm vụ đo lường nào.
Đo độ dẫn điện phân trực tuyến – với cảm biến DULCOTEST đáng tin cậy.
Cảm biến độ dẫn điện phân đo độ dẫn điện phân một cách gián tiếp thông qua sự truyền điện tích giữa hai đầu dò được nhúng trong môi trường cần đo.
Các loại cảm biến có hằng số tế bào k = 0,01 và k = 0,1 cm⁻¹ đặc biệt thích hợp để đo độ dẫn điện phân thấp nhất (< 1 µS/cm) trong nước tinh khiết và siêu tinh khiết.
Các loại cảm biến có hằng số tế bào k=1 cm⁻¹ được sử dụng trong nhiều loại nước không có thành phần tạo màng, lên đến 20 mS/cm.
Dòng cảm biến tiết kiệm chi phí LF(T) được sử dụng trong nước trong, không bị ô nhiễm hóa học.
Các dòng cảm biến LM(P), CK và CKPt cũng có thể được sử dụng trong các loại nước bị ô nhiễm hóa học và ở nhiệt độ cao hơn.
Lợi ích của bạn
- 27 loại cảm biến khác nhau được thiết kế riêng cho các yêu cầu khác nhau và mang lại hiệu suất tối ưu với chi phí hợp lý: phạm vi đo, nhiệt độ, khả năng chống hóa chất, khả năng chịu ô nhiễm và tích hợp quy trình
- Từ các cảm biến dẫn điện đơn giản đến các cảm biến cao cấp dựa trên nguyên lý đo cảm ứng
- Đo lường chính xác và đáng tin cậy cho phép các quy trình hiệu quả và độ tin cậy tối đa của quy trình
- Tuổi thọ cao và khoảng thời gian bảo trì ngắn giúp giảm thời gian ngừng hoạt động và tăng tính khả dụng của các giá trị đo được
- Bộ dụng cụ hoàn chỉnh được lắp ráp sẵn bao gồm phụ kiện và cảm biến để lắp đặt dễ dàng, nhanh chóng và không lỗi
- Giao hàng nhanh chóng để thay thế kịp thời
Conductivity Sensor LMP 001
Sensor for measurement of the lowest electrolytic conductivities for clear and also chemically contaminated water. With integrated temperature measurement and DIN 4-pin plug. For operation with the controllers DCCa, DACb, DMTa, D1Ca
Your Benefits
- Measured variable: electrolytic conductivity above 0.01 µS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
| Measuring range | 0.01…50 µS/cm |
| Cell constant | 0.01 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 70 °C |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Stainless steel 1.4571 |
| Sensor shaft | PP |
| Thread | 3/4″ |
| Installation length | 71 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Clean water applications, monitoring ion exchangers and reverse osmosis systems. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LMP 001 | 1020508 |
Conductivity Sensor LMP 001-HT
Sensor for measurement of the lowest electrolytic conductivity for clear and also chemically contaminated water. For high temperatures, with integrated temperature measurement and DIN 4-pin plug. For operation with the controllers DCCa, DACb, DMTa, D1Ca
Your Benefits
- Measured variable: electrolytic conductivity above 0.01 µS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- Temperature resistance up to 100 °C
| Measuring range | 0.01…50 µS/cm |
| Cell constant | 0.01 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 120 °C |
| Max. pressure | 16.0 bar (100 °C) |
| Sensors | Stainless steel 1.4571 |
| Sensor shaft | PVDF |
| Thread | 3/4″ |
| Installation length | 71 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | General applications at higher temperatures, clean water applications, condensate. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LMP 001-HT | 1020509 |
Conductivity Sensor LMP 01
Sensor for measurement of low electrolytic conductivities for clear and also chemically contaminated water. With integrated temperature measurement and DIN 4-pin plug. For operation with the controllers DCCa, DACb, DMTa, D1Ca
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 µS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
| Measuring range | 0.1…500 µS/cm |
| Cell constant | 0.10 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 70 °C |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Stainless steel 1.4571 |
| Sensor shaft | PP |
| Thread | 3/4″ |
| Installation length | 46 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Monitoring ion exchangers, reverse osmosis systems and desalination systems. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LMP 01 | 1020510 |
Conductivity Sensor LMP 01-TA
Sensor for measurement of low electrolytic conductivities for clear and also chemically contaminated water. With integrated temperature measurement and DIN 4-pin plug. For operation with the controllers DCCa, DACb, DMTa, D1Ca
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 µS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Simple installation in tanks and containers by sensor ready mounted in the immersion tube
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
| Measuring range | 0.1…500 µS/cm |
| Cell constant | 0.10 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 70 °C |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Stainless steel 1.4571 |
| Sensor shaft | PP |
| Thread | M 28 x 1.5 for TA-LM in-line probe fitting |
| Installation length | Max. 1 m |
| Process integration | Immersion through an immersion tube |
| Electrical Connection | 5 m fixed cable |
| Enclosure rating | IP 65 |
| Typical applications | Monitoring ion exchangers, reverse osmosis systems and desalination systems. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | ||
|---|---|---|
| LMP 01-TA | Sensor integrated in immersion fitting | 1020512 |
| LMP 01-FE | Replacement sensor for LMP 01-TA with 5 m fixed cable | 1020626 |
Conductivity Sensor LMP 01-HT
Sensor for measurement of low electrolytic conductivities for clear and also chemically contaminated water. For high temperatures, with integrated temperature measurement and DIN 4-pin plug. For operation with the controllers DCCa, DACb, DMTa, D1Ca
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 µm/cm
- Cost-effective sensor for clear, chemically contaminated water
- Temperature resistance up to 100 °C
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
| Measuring range | 0.1…500 µS/cm |
| Cell constant | 0.10 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 120 °C |
| Max. pressure | 16.0 bar (100 °C) |
| Sensors | Stainless steel 1.4571 |
| Sensor shaft | PVDF |
| Thread | 3/4″ |
| Installation length | 46 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | General applications at higher temperatures: industrial, process water, condensate. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LMP 01-HT | 1020511 |
Conductivity Sensor LFT 1 FE
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water. With integrated temperature measurement and fixed cable connector. For operation with controllers DMTa, D1Ca
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Cost-effective sensor for all clear uncontaminated water
- Flexible process connection by the use of sensor fittings for standard pH sensors
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- Fixed cable on the sensor head for difficult ambient conditions
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | PG 13.5 |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: open outlet or return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | 5 m fixed cable (4 x 0.5 mm2) |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. The sensors of the LF. .. series have only limited applicability for taking measurements in cleaning solutions containing surfactants and media containing solvents. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | DMTa, DULCOMARIN 3, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFT 1FE | 1001374 |
Conductivity Sensor LFTK 1 FE-5m-shd
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water. With integrated temperature measurement and fixed cable connector (5 m). For operation with controllers DCCa, DACb, DMTa, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Cost-effective sensor for all clear uncontaminated water
- Flexible process connection by the use of sensor fittings for standard pH sensors
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 1000 for precise temperature compensation in limited temperature ranges replaces separate temperature sensor and the corresponding sensor fitting
- Fixed cable on the sensor head for difficult ambient conditions
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 1000 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | PG 13.5 |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | 5 m fixed cable (4 x 0.25 mm2), screened |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFTK 1 FE-5m-shd | 1046132 |
Conductivity Sensor LFTK 1 FE-3m-shd
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water. With integrated temperature measurement and fixed cable connector (3 m). For operation with controllers DCCa, DACb, DMTa, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Cost-effective sensor for all clear uncontaminated water
- Flexible process connection by the use of sensor fittings for standard pH sensors
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 1000 for precise temperature compensation in limited temperature ranges replaces separate temperature sensor and the corresponding sensor fitting
- Fixed cable on the sensor head for difficult ambient conditions
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 1000 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | PG 13.5 |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | 3 m fixed cable (4 x 0.25 mm2), screened |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. The sensors of the LF. .. series have only limited applicability for taking measurements in cleaning solutions containing surfactants and media containing solvents. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFTK 1 FE-3m-shd | 1046010 |
Conductivity Sensor LFT 1 DE
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water. With integrated temperature measurement and DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Cost-effective sensor for all clear, uncontaminated types of water
- Flexible process connection by the use of sensor fittings for standard pH sensors
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- DIN 4-pin plug for simple installation
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | PG 13.5 |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. The sensors of the LF. .. series have only limited applicability for taking measurements in cleaning solutions containing surfactants and media containing solvents. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFT 1 DE | 1001376 |
Conductivity Sensor LFTK 1 DE
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water with integrated temperature measurement and DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Cost-effective sensor for all clear uncontaminated water
- Flexible process connection by the use of sensor fittings for standard pH sensors
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- DIN 4-pin plug for simple installation
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 1000 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | PG 13.5 |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. The sensors of the LF. .. series have only limited applicability for taking measurements in cleaning solutions containing surfactants and media containing solvents. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFTK 1 DE | 1002822 |
Conductivity sensor LFT 1 1/2″
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water. With integrated temperature measurement and DIN 4-pin plug and 1/2-inch screw-in thread. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Cost-effective sensor for all clear, uncontaminated types of water
- Hydraulic connector with 1/2″ thread as an alternative to the corresponding standard design with PG 13.5 thread
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- DIN 4-pin plug for simple installation
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | 1/2″ |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. The sensors of the LF. .. series have only limited applicability for taking measurements in cleaning solutions containing surfactants and media containing solvents. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFT 1 1/2″ | 1001378 |
Conductivity sensor LFTK 1 1/2″
Cost-effective sensor for measurement of electrolytic conductivity in clear, uncontaminated water. With integrated temperature measurement and DIN 4-pin plug and 1/2-inch screw-in thread. For operation with controllers DCCa, DACb, DMTa, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µC/cm
- Cost-effective sensor for all clear, uncontaminated types of water
- Hydraulic connector with 1/2″ thread as an alternative to the corresponding standard design with PG 13.5 thread
- Special graphite electrodes, optimised for a highly dynamic measuring range: 0.01-20 mS/cm
- Integrated Pt 1000 for precise compensation in limited temperature ranges and with longer cables. Replaces separate temperature sensor and the corresponding sensor fitting
- DIN 4-pin plug for simple installation
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 1000 |
| Medium temperature | 0 … 80 °C (at 1 bar) |
| Max. pressure | 16.0 bar (25 °C) |
| Sensors | Special graphite |
| Sensor shaft | Epoxy |
| Thread | 1/2″ |
| Installation length | 120 ±3 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Drinking water, swimming pool water, process water. The sensors of the LF. .. series have only limited applicability for taking measurements in cleaning solutions containing surfactants and media containing solvents. |
| Resistance to | Unsuitable for chemically contaminated water and water containing film-forming ingredients |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LFTK 1 1/2″ | 1002823 |
Conductivity Sensor CK 1
Sensor for measurement of electrolytic conductivity for clear, chemically contaminated water with higher but constant temperature with DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Resistant to water ingredients in target applications thanks to injection-moulded design without adhesive or seals
- High temperature resistance up to 150 °C
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | None, only for applications with constant temperature |
| Medium temperature | 0 … 150 °C (at 1 bar) |
| Max. pressure | 16.0 bar (20 °C) |
| Sensors | Special graphite |
| Sensor shaft | PES |
| Thread | R 1″ |
| Installation length | 79 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Cooling, industrial, process water, tank and pipe, cleaning systems in breweries, dairies, media separation. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes |
| Order no. | |
|---|---|
| CK 1 | 305605 |
Conductivity Sensor CKPt 1
Sensor for measurement of electrolytic conductivity for clear, chemically contaminated water and higher temperatures. With integrated temperature measurement and DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 10 µS/cm
- Resistant to water ingredients in target applications thanks to injection-moulded design without adhesive or seals
- High temperature resistance up to 150 °C
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
| Measuring range | 0.01…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 150 °C (at 1 bar) |
| Max. pressure | 16.0 bar (20 °C) |
| Sensors | Special graphite |
| Sensor shaft | PES |
| Thread | R 1″ |
| Installation length | 79 mm |
| Process integration | Bypass: with or without return of the sample water into the process line, inline: direct installation into the pipework; fixed or replaceable (replaceable fitting), tank, channel: Immersion in the immersion tube |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Cooling, industrial, process water, tank and pipe, cleaning systems in breweries, dairies, media separation. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| CKPt 1 | 305606 |
Conductivity Sensor LM 1
Sensor for measurement of electrolytic conductivity for clear and also chemically contaminated water. With DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 mS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Resistant to the constituents in the water of the target application
| Measuring range | 0.1…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | None, only for applications with constant temperature |
| Medium temperature | 0 … 70 °C (at 1 bar) |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Graphite |
| Sensor shaft | PP |
| Thread | 3/4″ |
| Installation length | 46 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Potable, cooling, industrial, process water, media separation. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes |
| Order no. | |
|---|---|
| LM 1 | 740433 |
Conductivity Sensor LM 1-TA
Sensor for measurement of electrolytic conductivity for clear and also chemically contaminated water. Fully assembled in an immersion fitting. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 mS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Resistant to the ingredients in the water of the target applications
- Simple installation in tanks, containers etc. by sensor ready mounted in the immersion tube
| Measuring range | 0.1…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | None, only for applications with constant temperature |
| Medium temperature | 0 … 70 °C (at 1 bar) |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Graphite |
| Sensor shaft | PP |
| Thread | M 28 x 1.5 for TA-LM in-line probe fitting |
| Installation length | Max. 1 m |
| Process integration | Tank, channel: Immersion through an immersion tube |
| Electrical Connection | 5 m fixed cable, screened |
| Enclosure rating | IP 65 |
| Typical applications | Potable, cooling, industrial, process water, media separation. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes |
| Order no. | ||
|---|---|---|
| LM 1-TA | Sensor integrated in immersion fitting | 1020528 |
| LM 1-FE | Replacement sensor for LM 1-TA | 1020627 |
Conductivity Sensor LMP 1
Sensor for measurement of electrolytic conductivity for clear and also chemically contaminated water. With integrated temperature measurement with DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 mS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Resistant to the ingredients in the water of the target applications
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
| Measuring range | 0.1…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 70 °C (at 1 bar) |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Graphite |
| Sensor shaft | PP |
| Thread | 3/4″ |
| Installation length | 46 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | Potable, cooling, industrial, process water, media separation. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LMP 1 | 1020513 |
Conductivity Sensor LMP 1-TA
Sensor for measurement of electrolytic conductivity for clear and also chemically contaminated water. With integrated temperature measurement, fully assembled in an immersion fitting. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 mS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Resistant to the ingredients in the water of the target applications
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- Simple installation in tanks, containers etc. by sensor ready mounted in the immersion tube
| Measuring range | 0.1…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 70 °C (at 1 bar) |
| Max. pressure | 16.0 bar (50 °C) |
| Sensors | Graphite |
| Sensor shaft | PP |
| Thread | M 28 x 1.5 for TA-LM in-line probe fitting |
| Installation length | 1 |
| Process integration | Tank, channel: Immersion through an immersion tube |
| Electrical Connection | 5 m fixed cable, screened |
| Enclosure rating | IP 65 |
| Typical applications | Potable, cooling, industrial, process water, media separation. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes |
| Order no. | ||
|---|---|---|
| LMP 1-TA | Sensor integrated in immersion fitting | 1020525 |
| LMP 1-FE | Replacement sensor for LMP 1-TA | 1020727 |
Conductivity Sensor LMP 1-HT
Sensor for measurement of electrolytic conductivity for clear and also chemically contaminated water. For high temperatures, with integrated temperature measurement and DIN 4-pin plug. For operation with controllers DCCa, DACb, DMTa, D1Ca, AEGIS II, diaLog X
Your Benefits
- Measured variable: electrolytic conductivity above 0.1 mS/cm
- Cost-effective sensor for clear, chemically contaminated water
- Resistant to the ingredients in the water of the target applications
- Integrated Pt 100 for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- Temperature resistance up to 100 °C
| Measuring range | 0.1…20 mS/cm |
| Cell constant | 1.00 cm-1 ±5 % |
| Temperature measurement | Pt 100 |
| Medium temperature | 0 … 120 °C (at 1 bar) |
| Max. pressure | 16.0 bar (100 °C) |
| Sensors | Graphite |
| Sensor shaft | PVDF |
| Thread | 3/4″ |
| Installation length | 46 mm |
| Process integration | Inline: direct installation into the pipework, bypass: with or without return of the sample water into the process line |
| Electrical Connection | DIN 4-pin angle plug |
| Enclosure rating | IP 65 |
| Typical applications | General applications at higher temperatures process water, process water from electroplating, media separation, with CIP (cleaning in place). |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, Compact, DMTa, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement |
| Order no. | |
|---|---|
| LMP 1-HT | 1020524 |
Conductivity sensor CCT 1-mA
Sensor for measurement of electrolytic conductivities for clear and also chemically contaminated water. With integrated temperature measurement and factory-calibrated 4…20 mA output signal.
Your Benefits
- Measured variable: electrolytic conductivity up to 100 mS/cm
- Fail-safe 4-20 mA output signal for flexible connection to measuring equipment with standard 4-20 mA input
- Integrated temperature sensor for temperature compensation replaces separate temperature sensor and the corresponding sensor fitting
- Simple connection to a process with the ProMinent bypass fittings BAMa, DGMA, DLGIII and INLI
| Temperature measurement | NTC, integrated |
| Medium temperature | 0 … 50 °C (at 1 bar) |
| Max. pressure | 8.0 bar (25 °C) |
| Sensor head | PMMA |
| Sensors | Special graphite |
| Sensor shaft | PVC |
| Installation length | 51 mm / 71 mm |
| Process integration | Bypass via bypass fittings BAMa, DGMa, DLGIII or installation into G1” PP pipe via sensor fitting INLI |
| Electrical Connection | 4-wire cable, 0.25 mm², cable diameter 5.7 |
| Supply voltage | 12…36 V DC |
| Output signal | 4…20 mA, temperature-compensated, factory-calibrated, electrically isolated |
| Enclosure rating | IP 65 |
| Typical applications | Cooling water, process water, swimming pool water, general water with higher salt content up to 20 mS/cm. |
| Resistance to | Ingredients in the water of the target application, taking into account the compatibility of the material |
| Controllers | diaLog C, diaLog X, diaLog DACb, D1Cb/D1Cc, DULCOMARIN 3, AEGIS II, AEGIS S |
| Measuring principle, technology | Conductive, 2 electrodes. Integrated temperature measurement, integrated 4…20 mA transducer |
| Measuring range | Order no. | |
|---|---|---|
| CCT 1-mA-20 mS/cm | 0.2…20 mS/cm | 1081545 |
| CCT 1-mA-100 mS/cm | 1…100 mS/cm | 1152842 |
Conductivity sensor ICT 5
Cost-effective inductive conductivity sensor, suitable for high electrolytic conductivities above 200 µS/cm. Also suitable for chemically contaminated water and film-forming media. For installation in pipework
Your Benefits
- Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically contaminated types of water and in film-forming media
- Complete with injection moulded PP sensor head, no apparent bonds, seals
- Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high measuring range dynamics of the inductive measuring principle
- Simple installation in PVC pipework by bonding the DN 40 adhesive connector supplied into a standard T-piece and screwing in the sensor using the union nut supplied.
- A DN 40 welded connector is optionally available for use in PP pipework
| Measuring range | 0.2…2,000 mS/cm |
| Cell constant | 6.25 cm-1 |
| Measuring accuracy | ±2% based on the measured value ±30 μS/cm |
| Temperature sensor | Pt 1000, wetted material Stainless steel 1.4301 |
| Medium temperature | -10…80 °C -10…60 °C for installation in PVC pipes, -10…80 °C for installation in PP pipes |
| Max. pressure | 10.0 bar at 20 °C, 6.0 bar at 60 °C, 0.0 bar at 80 °C |
| Min. pressure | -0.1 bar (-10 … 80 °C) |
| Sensor material | PP |
| Seals | EPDM |
| Electrical Connection | 10 m fixed cable, 7x 0.35 mm² via a terminal |
| Enclosure rating | IP 65 |
| Typical applications | Contaminated wastewater, blowdown control in cooling towers, control of electroplating and rinsing baths, cleaning in Place (CIP), product monitoring, seawater, brine swimming pools. |
| Resistance to | Ingredients in the water of the target application, taking into account compatibility to PP/EPDM, deposit-forming media |
| Process integration | With union nut, PVC, 1 1/2 inch female thread, including DN 40 bonded nozzle with 1 1/2 inch male thread for fitting in DN 40 PVC standard pipes (included in the scope of delivery). The corresponding set-in nozzle for fitting in PP standard pipes is available as an accessory |
| Controllers | Compact |
| Measuring principle, technology | Inductive, 2 coils. Integrated temperature measurement |
| Order no. | |
|---|---|
| ICT 5 | 1095248 |
Conductivity Sensor ICT 5-IMA
Cost-effective inductive conductivity sensor, suitable for high electrolytic conductivities above 200 µS/cm. Also suitable for chemically contaminated water and film-forming media. Completely integrated into an immersion pipe
Your Benefits
- Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically contaminated types of water and in film-forming media
- Complete with injection moulded PP sensor head, no apparent bonds, seals
- Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high measuring range dynamics of the inductive measuring principle
- Simple installation in tanks, containers etc. thanks to sensor ready mounted in the immersion tube
| Measuring range | 0.2…2,000 mS/cm |
| Cell constant | 6.25 cm-1 |
| Measuring accuracy | ±2% based on the measured value ±30 μS/cm |
| Temperature sensor | Pt 1000, wetted material Stainless steel 1.4301 |
| Medium temperature | -10…60 °C |
| Max. pressure | 0.0 bar |
| Min. pressure | -0.1 bar (-10 … 60 °C) |
| Sensor material | PP |
| Immersion pipe material | PP |
| Sensor guard material | SS 1.4301, AISI 304 |
| Seals | EPDM |
| Electrical Connection | 10 m fixed cable, 7x 0.35 mm² via a terminal |
| Enclosure rating | IP 65 |
| Typical applications | Contaminated wastewater, blowdown control in cooling towers, control of electroplating and rinsing baths, cleaning in Place (CIP), product monitoring, seawater, brine swimming pools. |
| Resistance to | Ingredients in the water of the target application, taking into account compatibility to PP/EPDM, deposit-forming media |
| Process integration | Immersion with immersion length 1 m |
| Controllers | Compact |
| Measuring principle, technology | Inductive, 2 coils. Integrated temperature measurement |
| Order no. | |
|---|---|
| ICT 5-IMA | 1095249 |
Conductivity Sensor ICT 2
High-performance inductive conductivity sensor with high dynamic measuring range. Also suitable for types of water with aggressive chemicals and film-forming components. Permitted temperatures up to 125 °C. For installation in pipework, tanks and for immersion in storage tanks
Your Benefits
- Measured variable: electrolytic conductivity. The inductive (non-contact) measuring principle permits applications in chemically contaminated types of water and in film-forming media
- There is no need for adhesive or seals as the sensor is fully embedded in PFA
- Measurements at high conductivity values of up to 2,000 mS/cm are possible without interfering polarisation by means of the high measuring range dynamics of the inductive measuring principle
- Flexible connection to the processes is possible via a flange or immersion pipe with optional accessories
| Measuring range | 0.02…2,000 mS/cm |
| Cell constant | 1.98 cm-1 |
| Measuring accuracy | ± (5 μS/cm + 0.5 % of measured value at T < 100 °C)
± (10 μS/cm + 0.5 % of measured value at T > 100 °C) |
| Temperature compensation | Pt 100, class A, completely extrusion-coated |
| Medium temperature | 0…125 °C, when used together with D1C, temperature compensation is limited to 100 °C |
| Max. pressure | 16.0 bar |
| Sensor material | PFA, completely extrusion-coated |
| Electrical Connection | 5 m fixed cable, 6x 0.35 mm² via a terminal |
| Enclosure rating | IP 67 |
| Typical applications | Production processes in the chemical industry, phase separation of product mixtures, determination of concentrations of aggressive chemicals. |
| Resistance to | Electrolytic conductivity of > 20 mS/cm, PFA-compatible aggressive chemicals (no concentrated lyes), deposit-forming media |
| Process integration | Fitting in pipes, tanks (sideways): G 3/4 stainless steel thread (1.4571) or flange fitting: With the accessories: Stainless steel flange ANSI 2 inch 300 lbs, SS 316L (adaptable to DIN counter flange DN 50 PN 16). |
| Controllers | Compact |
| Measuring principle, technology | Inductive, 2 coils. Integrated temperature measurement |
| Order no. | |
|---|---|
| ICT 2 | 1023352 |
Conductivity sensor ICT 8-mA
Inductive sensor for the measurement of electrolytic conductivity. Suitable for contaminated water. With integrated temperature correction and factory-calibrated 4…20 mA output signal.
Your Benefits
- Measured variable: electrolytic conductivity up to 200 mS/cm without polarisation effect
- The inductive (non-contact) measuring principle permits applications in water with solids content and in film-forming media
- Fail-safe 4-20 mA output signal for flexible connection to measuring equipment with standard 4…20 mA input
- Integrated temperature correction replaces separate temperature sensor and sensor fitting
| Measuring range | three configurable measuring ranges 0.2…2.0 mS/cm / 0.5…20 mS/cm / 1…200 mS/cm |
| Temperature correction | integrated in the sensor electronics, temperature co-efficient: 1.7%/K |
| Medium temperature | max. 50 °C at 1 bar |
| Sensor material | PP |
| Seals | EPDM |
| Installation length | 75 mm |
| Electrical Connection | Fixed cable, 6-wire (6×0.25 mm²). The cable length is 2 m between the sensor and 4-20 mA cable transmitter and 10 m between the cable transmitter and monitor. |
| Typical applications | Desalination control in cooling towers, contaminated wastewater, control of electroplating and rinsing baths, salt water desalination, adjustment of the salt content in swimming pool water |
| Resistance to | Water ingredients in the target application, taking into account compatibility to PP/EPDM and combating film-forming media |
| Process integration | 1/2″ male thread (BSP) for mounting using flange, installation in PVC pipes, DN 50 by means of installation adapter ICT8, DN 50, PVC, order no. 1106570, immersion using immersion pipe, 1 m, order no. 1105964 |
| Controllers | diaLog C, diaLog X, diaLog DACb, D1Cb/D1Cc, DULCOMARIN 3, AEGIS II |
| Measuring principle, technology | Inductive, 2 coils. Integrated temperature measurement, integrated 4…20 mA transducer |
| Order no. | |
|---|---|
| ICT 8 -mA-200 mS/cm | 1098530 |
Field of application
The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.
- Metering and dilution of chemicals
- Measuring the concentration of aggressive chemicals
- Washing and cleaning processes, especially CIP (cleaning in place) processes in the food and beverage industry
- Blowdown control in cooling towers
- Control of ultra-clean, clean and potable water generation processes
- Wastewater
Metering Chemicals in Coolant Treatment
The secret of a highly durable coolant system
We treat coolants with small quantities of chemicals, reducing the environmental footprint while protecting the system against corrosion, deposits and biological growth.
Monitoring and Replenishing of Electroplating Baths
Demanding baths require concentration
Baths have to be monitored and replenished continually. This requires high concentration – from the sensors, controllers and pumps. Yet only small amounts of precisely fed chemicals are needed.
Waste Water Treatment in the Paper and Pulp Industry
Clean waste water is returned to nature
Very low-impact treatment for waste water. Our intelligent processes efficiently clean and save money too.
Cooling Water Treatment in Energy Generation
No biofilm, no bacteria, no dangerous by-products
ProMinent metering pumps allow you to keep your cool at all times as you no longer need to concern yourself with the cooling process. Alternative biocides reliably prevent deposits.
Waste Water Treatment in Energy Generation
Treating waste water quickly and thoroughly
The benefits of our waste water treatment for energy generators can be easily summed up: our waste water treatment is thorough, environmentally-sound, economical and fully automatic. Because ProMinent thinks things through.
Cleaning fruit and vegetables
Simple and reliable cleaning process for agricultural products
Fresh fruit and veg are an essential part of our diet. So it’s very important for them to reach the consumer in a safe condition. Precise metering of chlorine dioxide ensures that this is the case.
Fish processing, fish and shrimp farming
Successful farming and hygienic processing
More and more people are enjoying delicacies from our seas. Fish farms and also the fish processing industry therefore face the huge challenge of producing goods quickly and hygienically. Disinfected water is essential to both industries.
CIP – Cleaning In Place
CIP gets to work exactly where it’s needed
Small volumes of disinfectant are produced and used on site for sterile machines and process water. Highly concentrated, dangerous chemicals and tedious disassembly are a thing of the past.
Production of whey and cheese
Perfect water for the entire production process
To guarantee an end product fit for purpose, ProMinent ensures optimum water quality at every stage of production, thereby reliably complying with statutory hygiene standards.
Monitoring and optimising surface treatment in electroplating
The right way to immerse items!
In order to attain a desired surface quality before taking further steps, such as painting, raw products are treated with various chemicals.
Sustainable use of water in industrial processes
Sustainable cycles
There are certainly chemicals that are more popular than hydrogen peroxide. But despite this, it has to be used in certain industrial processes, such as the disinfection of water.
Tại Sao Chọn Medin Company?
Nhà Phân Phối Chính Hãng Uy Tín
Medin Company tự hào là nhà phân phối chính hãng bơm định lượng của Prominent Việt Nam, cam kết cung cấp 100% sản phẩm chính hãng với đầy đủ chứng nhận và tem bảo hành quốc tế.
Mỗi sản phẩm đều được nhập khẩu trực tiếp từ nhà sản xuất, đảm bảo chất lượng tốt nhất và giá thành cạnh tranh nhất trên thị trường.
Giải Pháp Tối Ưu, Tiết Kiệm Chi Phí
Với nhiều năm kinh nghiệm trong lĩnh vực tự động hóa, đội ngũ kỹ sư của Medin luôn sẵn sàng phân tích nhu cầu thực tế và đưa ra giải pháp metering pump phù hợp nhất cho từng quy trình sản xuất.
Chúng tôi không chỉ bán sản phẩm mà còn tư vấn tối ưu hóa hệ thống, giúp khách hàng giảm thiểu chi phí đầu tư ban đầu và chi phí vận hành lâu dài.
Lợi ích cụ thể:
- Tư vấn lựa chọn dòng bơm phù hợp với tính chất hóa chất
- Tính toán lưu lượng và áp suất chính xác
- Thiết kế hệ thống định lượng hoàn chỉnh
- Đào tạo vận hành và bảo trì cho nhân viên
Hỗ Trợ Kỹ Thuật 24/7 và Bảo Hành Chính Hãng
Hiểu rõ tầm quan trọng của sự liên tục trong sản xuất, Medin cung cấp dịch vụ hỗ trợ kỹ thuật 24/7 qua hotline, email và zalo.
Đội ngũ kỹ sư giàu kinh nghiệm sẵn sàng giải đáp mọi thắc mắc, xử lý sự cố nhanh chóng và cung cấp phụ tùng thay thế chính hãng với thời gian ngắn nhất.
Cam kết bảo hành:
- Bảo hành chính hãng từ Prominent Việt Nam
- Phụ tùng thay thế chính hãng 100%
- Bảo trì định kỳ theo lịch trình
- Hỗ trợ nâng cấp và mở rộng hệ thống
Khảo Sát Thực Tế và Sản Phẩm Dùng Thử Miễn Phí
Để khách hàng có thể đánh giá chính xác hiệu quả của giải pháp bơm định lượng, Medin cung cấp dịch vụ khảo sát thực tế tại hiện trường hoàn toàn miễn phí.
Đội ngũ kỹ sư sẽ đến tận nơi để đo đạc, phân tích quy trình và đề xuất giải pháp cụ thể.
Đặc biệt, với các dự án lớn, chúng tôi hỗ trợ sản phẩm dùng thử miễn phí để khách hàng có thể kiểm chứng hiệu quả trước khi quyết định đầu tư.
Điều này thể hiện sự tự tin tuyệt đối của chúng tôi vào chất lượng sản phẩm và giải pháp mà mình cung cấp.
Đội Ngũ Kỹ Sư Chuyên Nghiệp
Với đội ngũ kỹ sư được đào tạo bài bản, có chứng chỉ chuyên môn và nhiều năm kinh nghiệm thực tế trong lĩnh vực tự động hóa, Medin tự tin mang đến cho khách hàng không chỉ là sản phẩm mà còn là tri thức và giải pháp toàn diện.
Chúng tôi thường xuyên tham gia các khóa đào tạo của Prominent để cập nhật công nghệ mới nhất và áp dụng vào thực tế tại Việt Nam.
Liên Hệ Medin Co., Ltd
- Công ty TNHH Mễ Đình được thành lập từ năm 2006.
- Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
- Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
- Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
- Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”
- Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
- Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.
