Plunger Metering Pump MAKRO TZKa ProMinent
Capacity range of single head pump: 8 – 1,141 l/h, 320 – 11 bar
The plunger metering pump Makro TZ impresses with its excellent process reliability, outstanding flexibility and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.
Downloads
Plunger Metering Pump MAKRO TZKa ProMinent
Capacity range of single head pump: 8 – 1,141 l/h, 320 – 11 bar
The plunger metering pump Makro TZ impresses with its excellent process reliability, outstanding flexibility and its modular construction enables it to be outstandingly adapted to the performance requirements of the respective application.
Powerful, built to last with a plunger
The plunger metering pump Makro TZ (TZKa) has an adjustable eccentric drive mechanism and, together with the Makro TZ diaphragm metering pump, forms a range of drive mechanisms with stroke lengths of 10 and/or 20 mm. A wide range of drive versions is available, including some for use in Exe and Exde areas with ATEX certification.
Your benefits
Process reliability:
- The dosing precision is better than ± 0.5 % within the 10-100 % stroke length range under defined conditions and with correct installation
Excellent flexibility:
- The modular construction with single and double head versions permits a wide range of applications, with the double head designs (boxer principle) being operated in push-pull mode
- It is possible to combine up to 4 metering units, even with different pump capacities, in multiple pump systems
- 4 different gear ratios are available
- Customised designs are available on request
Field of application
The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.
- Volume-proportional metering of chemicals/additives in water treatment
- Metering of reactants and catalysts in the chemical industry
- Level-dependent metering of additives in industrial production engineering
Onshore Metering in Gas Pump Stations
Safety at the borehole
Flammable methane hydrate at the borehole can be very dangerous.
But not with ProMinent metering pumps.
By metering fluid into the drilling head, they don’t even allow methane hydrate to be produced in the first place.
ProMinent’s Orlita diaphragm metering pumps prevent methane hydrate from forming at the borehole.
Their metering heads are interconnected for even pumping pressures and volumes.
The recipe for reliable metering even under extreme conditions?
Relief valves protect against overload, bleed valves and rupture indicators automatically detect critical situations and remedy them.
Technical Details
- Stroke length: 0-20 mm
- Rod force: 8000 N
- Stroke length adjustment range: 0 – 100%
- Stroke length adjustment: manually using shift ring in 0.5% increments (optionally with electric actuator or control drive)
- The dosing precision is better than ± 0.5 % within the 10 – 100% stroke length range under defined conditions and with correct installation. Observe the information in the operating instructions.
- High-performance ceramic-coated stainless steel plunger Wetted materials: Stainless steel 1.4571. Special materials are available on request
- A wide range of power end/drive versions is available: Three-phase standard AC motors, motors for use in areas at risk from explosion and different flange designs for use in customer-specific motors
- Degree of protection: IP 55
- Salt water-resistant, acrylic resin-coated cast aluminium housing
- For safety reasons, provide suitable overflow equipment with all plunger metering pumps during installation
Technical Data
| Type | Capacity at max. back pressure with 1500 rpm motor at 50 Hz | Capacity at max. back pressure at 60 Hz | Suction lift | Connector Suction/Discharge Side | Shipping weight | Plunger Ø | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. stroke rate | Max. stroke rate | ||||||||||
| l/h | bar | ml/stroke | Strokes/min | psi | l/h / gph (US) | Strokes/min | m WC | G-DN | kg | mm | |
| * The suction and discharge side Rp 1/4 and Rp 3/8 connectors have an internal thread connection and are configured as double ball valves. | |||||||||||
| 320009 * | 8.7 | 320 | 2.0 | 72 | 4,627 | 10/2.6 | 86 | 4.0 | Rp 1/4–8 | 50 | 12 |
| 320012 * | 11.6 | 320 | 2.0 | 96 | 4,627 | 14/3.7 | 115 | 4.0 | Rp 1/4–8 | 50 | 12 |
| 320014 * | 14.5 | 320 | 2.0 | 120 | 4,627 | 17/4.5 | 144 | 4.0 | Rp 1/4–8 | 50 | 12 |
| 320017 * | 17.4 | 320 | 2.0 | 144 | 4,627 | 21/5.5 | 173 | 4.0 | Rp 1/4–8 | 50 | 12 |
| 320018 * | 17.7 | 320 | 4.1 | 72 | 4,627 | 21/5.5 | 86 | 4.0 | Rp 1/4–8 | 50 | 17 |
| 320024 * | 23.6 | 320 | 4.1 | 96 | 4,627 | 28/7.4 | 115 | 4.0 | Rp 1/4–8 | 54 | 17 |
| 320030 * | 29.5 | 320 | 4.1 | 120 | 4,627 | 35/9.2 | 144 | 4.0 | Rp 1/4–8 | 54 | 17 |
| 313035 * | 35.4 | 313 | 4.1 | 144 | 4,526 | 42/11.1 | 173 | 4.0 | Rp 1/4–8 | 54 | 17 |
| 192033 * | 32.9 | 192 | 7.6 | 72 | 2,776 | 39/10.3 | 86 | 4.0 | Rp 3/8–10 | 55 | 23 |
| 192044 * | 43.9 | 192 | 7.6 | 96 | 2,776 | 59/15.6 | 115 | 4.0 | Rp 3/8–10 | 55 | 23 |
| 192055 * | 54.8 | 192 | 7.6 | 120 | 2,776 | 66/17.4 | 144 | 4.0 | Rp 3/8–10 | 55 | 23 |
| 168066 * | 65.8 | 168 | 7.6 | 144 | 2,437 | 79/20.9 | 173 | 4.0 | Rp 3/8–10 | 55 | 23 |
| 113057 * | 57.5 | 113 | 13.3 | 72 | 1,634 | 69/18.2 | 86 | 4.0 | Rp 3/8–10 | 56 | 30 |
| 113077 * | 76.6 | 113 | 13.3 | 96 | 1,634 | 92/24.3 | 115 | 4.0 | Rp 3/8–10 | 56 | 30 |
| 113096 * | 95.8 | 113 | 13.3 | 120 | 1,634 | 115/30.4 | 144 | 4.0 | Rp 3/8–10 | 56 | 30 |
| 096115 * | 114.9 | 96 | 13.3 | 144 | 1,392 | 138/36.5 | 173 | 4.0 | Rp 3/8–10 | 56 | 30 |
| 063104 | 104.3 | 63 | 24.2 | 72 | 911 | 125/33.0 | 86 | 4.0 | G 1 1/4–20 | 58 | 40 |
| 063139 | 139.0 | 63 | 24.2 | 96 | 911 | 167/44.1 | 115 | 4.0 | G 1 1/4–20 | 58 | 40 |
| 063174 | 173.8 | 63 | 24.2 | 120 | 914 | 209/55.2 | 144 | 4.0 | G 1 1/4–20 | 58 | 40 |
| 052208 | 208.5 | 52 | 24.2 | 144 | 754 | 250/66.0 | 173 | 4.0 | G 1 1/4–20 | 58 | 40 |
| 040163 | 162.9 | 40 | 37.7 | 72 | 578 | 195/51.5 | 86 | 4.0 | G 1 1/4–20 | 58 | 50 |
| 040217 | 217.2 | 40 | 37.7 | 96 | 578 | 261/68.9 | 115 | 4.0 | G 1 1/4–20 | 58 | 50 |
| 040271 | 271.5 | 40 | 37.7 | 120 | 580 | 326/86.1 | 144 | 4.0 | G 1 1/4–20 | 58 | 50 |
| 033326 | 325.8 | 33 | 37.7 | 144 | 479 | 391/103.3 | 173 | 4.0 | G 1 1/4–20 | 58 | 50 |
| 028237 | 237.0 | 28 | 54.9 | 72 | 405 | 284/75.0 | 86 | 4.0 | G 1 1/2–25 | 62 | 60 |
| 028316 | 315.9 | 28 | 54.9 | 96 | 405 | 379/100.1 | 115 | 4.0 | G 1 1/2–25 | 62 | 60 |
| 027395 | 394.9 | 27 | 54.9 | 120 | 392 | 474/125.2 | 144 | 4.0 | G 1 1/2–25 | 62 | 60 |
| 022474 | 473.9 | 22 | 54.9 | 144 | 319 | 569/150.3 | 173 | 4.0 | G 1 1/2–25 | 62 | 60 |
| 020322 | 322.5 | 20 | 74.7 | 72 | 289 | 387/102.2 | 86 | 4.0 | G 1 1/2–25 | 62 | 70 |
| 020430 | 430.0 | 20 | 74.7 | 96 | 289 | 516/136.3 | 115 | 4.0 | G 1 1/2–25 | 62 | 70 |
| 020538 | 537.6 | 20 | 74.7 | 120 | 290 | 645/170.4 | 144 | 4.0 | G 1 1/2–25 | 62 | 70 |
| 016645 | 645.1 | 16 | 74.7 | 144 | 232 | 774/204.5 | 173 | 4.0 | G 1 1/2–25 | 62 | 70 |
Other gear reduction ratios are available upon request.
The permissible priming pressure on the suction side is approximately 50% of the max. permitted back pressure.
Materials in Contact with the Medium
| Identity code of material | Hydraulic Ø mm | Dosing head | Connection on suction/discharge side | Ball seat | Valve balls | Plungers |
|---|---|---|---|---|---|---|
| SST | …12 S to 50 S | Stainless steel 1.4571/1.4404 | Stainless steel 1.4571/1.4404 | Stainless steel/PTFE | Oxide ceramic | Stainless steel/ceramic |
| SST | …60 S to 70 S | Stainless steel 1.4571/1.4404 | Stainless steel 1.4581 | PTFE | Stainless steel 1.4404 | Stainless steel/ceramic |
Motor Data
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55* | 230 V/400 V | 50 Hz | 1.5 kW | |
| R | 3-phase, IP 55* | 230 V/400 V | 50/60 Hz | 2.2 kW | With PTC, speed control range 1:20, with external fan 1-phase 230 V; 50/60 Hz |
| V0 | 3-phase, IP 55* | 400 V | 50 Hz | 3.0 kW | Variable speed stroke control motor with integrated frequency converter |
| L1 | 3-phase,II 2G Ex eb IIC T3 Gb | 220 – 240 V/380 – 420 V | 50 Hz | 1.5 kW | |
| L2 | 3-phase,II 2G Ex db IIC T4 Gb | 220 – 240 V/380 – 420 V | 50 Hz | 1.5 kW | With PTC, speed control range 1:5 |
| P1 | 3-phase,II 2G Ex e IIC T3 | 250 – 280 V/440 – 480 V | 60 Hz | 2.0 kW | On request |
| P2 | 3-phase,II 2G Ex de IIC T4 | 250 – 280 V/440 – 480 V | 60 Hz | 1.5 kW | With PTC, speed control range 1:5, available on request |
Motor data sheets can be requested for more information. Versions 265/460V – 60Hz, special motors or special motor flanges are available on request.
Information for use in areas at risk from explosion
Only use pumps with the appropriate labelling in line with the ATEX Directive 2014/34/EC in premises at risk from explosion. Ensure that the explosion group, category and degree of protection specified on the label correspond to or are superior to the conditions prevalent in the intended application.
Tại Sao Chọn Medin Company?
Medin Company chuyên cung cấp các sản phẩm chính hãng chất lượng cao.
Với kinh nghiệm sâu rộng trong ngành, chúng tôi không chỉ cung cấp sản phẩm mà với đội ngũ kĩ sư giàu kinh nghiệm, chúng tôi còn mang đến giải pháp tối ưu cho khách hàng.
Medin Company đảm bảo:
- Sản phẩm chính hãng 100%
- Giá cả cạnh tranh nhất thị trường
- Bảo hành chính hãng toàn cầu
Dịch Vụ Dùng Thử Miễn Phí
- Test tại nhà máy khách hàng: Đánh giá hiệu suất thực tế
- Không phí phát sinh: Miễn phí hoàn toàn trong 30 ngày
- Cam kết hiệu quả: Đảm bảo tăng productivity tối thiểu 30%
Khảo Sát Tận Nơi
- Site survey chuyên nghiệp: Kỹ sư senior trực tiếp khảo sát
- Báo cáo chi tiết: Phân tích toàn diện điều kiện vận hành
- Tư vấn tối ưu: Giải pháp phù hợp 100% với nhu cầu
Hỗ Trợ Kỹ Thuật 24/7
- Hotline chuyên dụng: Phản hồi trong 15 phút
- Remote support: Hỗ trợ từ xa qua
- On-site service: Kỹ sư đến tận nơi trong 24h
Liên Hệ Medin Co., Ltd
- Công ty TNHH Mễ Đình được thành lập từ năm 2006.
- Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
- Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
- Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
- Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”
- Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
- Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.
