Hydraulic Diaphragm Metering Pump ORLITA Evolution E1Sa E2Sa ProMinent
Capacity range of single-head pump: 0.9 – 134 l/h, 260 – 30 bar
As an extremely robust hydraulic diaphragm metering pump, the ORLITA Evolution E1Sa/E2Sa meets the most exacting safety requirements.
It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling system and unique diaphragm position control.
Downloads
Hydraulic Diaphragm Metering Pump ORLITA Evolution E1Sa/ E2Sa ProMinent
Capacity range of single-head pump: 0.9 – 134 l/h, 260 – 30 bar
As an extremely robust hydraulic diaphragm metering pump, the ORLITA Evolution E1Sa/E2Sa meets the most exacting safety requirements.
It is characterised by its PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling system and unique diaphragm position control.
Safety processes as standard.
The ORLITA Evolution E1Sa/E2Sa product ranges together with the ORLITA Evolution hydraulic diaphragm metering pumps product ranges EF1a, EF2a, EF3a and EF4a form an integrated product range with stroke lengths of 15 to 40 mm.
This covers the capacity range from 3 to 7,400 l/h at 400- 10 bar.
A wide range of power end versions is available, including some for use in the Zone 1 or Zone 2 areas at risk from explosion with ATEX certification.
The entire ORLITA Evolution product range is designed to comply with API 675.
Your benefits
Maximum process reliability:
- Capacity range of 0.9 – 134 l/h, 260 – 30 bar
- PTFE multi-layer diaphragm with integral diaphragm rupture warning / signalling system
- Integral hydraulic relief valve
- The new diaphragm position control protects against impermissible operating statuses (e.g. no damage in the event of a blockage on the suction or discharge side)
- The dosing precision is better than ±1 % in a stroke length adjustment range of 10 – 100 % under defined conditions and with correct installation
- Continuous venting of the oil chamber ensures reliable operation
Field of application
The following list of applications are general examples of generally suitable applications for this product.
Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.
- Oil and gas industry
- Metering of reactants and catalysts in the chemical industry
- Volume-proportional metering of chemicals/additives in the treatment of boiler feed water
- Level-dependent metering of auxiliary agents in industrial production engineering, for instance hot wax metering in the production of adhesive strips
Micro-Metering in the Laboratory
Even small metering pumps pack a punch in the laboratory
With ProMinent metering pumps, even tiny quantities of fluids are metered with reliable accuracy.
These small but high-performance pumps are compact, very economical with energy, and low-maintenance.
What happens behind closed laboratory doors is strictly secret.
But there’s no secret about the stringent precision provided by ProMinent: our pumps meter even the smallest quantities of fluid with high accuracy for a wide range of processes.
The ProMinent metering pumps mikro delta®, gamma and delta® are the small pumps that are big on performance.
Inhibitor Metering Offshore
For smooth oil production
Our ProMinent metering pumps keep the pipework clear 24 hours a day and protect against corrosion and defects. So the oil can keep flowing.
Reliable technology is essential on a drilling platform.
ProMinent Orlita metering pumps are perfectly suited to the tough environment.
Special materials and paintwork designed for offshore applications make them incredibly robust.
And they work intelligently: the inhibitor is fed via several metering heads and can be individually adapted to every single metering volume and pump pressure.
Corrosion in the pipework and feed units is prevented.
Technical Details
- Capacity range of pump with a dosing head: E1Sa/E2Sa 0.9 – 134 l/h, 260 – 30 bar
- Stroke length: 0 – 16 mm
- Rod force: 2000 N (E1Sa) / 4500 N (E2Sa)
- Adjustment range of stroke length: 0 – 100 %. Stroke length adjustment: manually by means of manual adjustment wheel and scaled display (optionally with electric power end or control drive). A fixed stroke variant in accordance with API 674 is also available as an alternative
- Dosing precision is better than ± 1 % with a 10 – 100% stroke length range under defined conditions and with correct installation
- PTFE multi-layer diaphragm with optical and/or electrical diaphragm rupture warning / signalling system via a contact
- Integrated hydraulic vent and vent valve
- Materials in contact with fluids: Stainless steel 1.4404, special designs are available on request
- A wide range of power end versions is available: Three-phase standard motors, also for use with speed control and/or in areas at risk from explosion, different flange designs for the use of customer-specific motors
- Degree of protection: IP 55
- Design in compliance with API 675 / API 674, ATEX among others
ORLITA Evolution E1Sa
Technical data for Evolution E1Sa single-head pump 50 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | |||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 93 | 112 | 140 | 159 | 175 | 194 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | |||||||||||
| 6 | 260 | (0.8) – 0.9 | (0.9) – 1.0 | (1.2) – 1.3 | (1.3) – 1.5 | (1.4) – 1.6 | (1.6) – 1.8 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 240 | (0.9) – 1.0 | (1.0) – 1.1 | (1.3) – 1.4 | (1.5) – 1.6 | (1.6) – 1.8 | (1.8) – 2.0 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 190 | (1.1) – 1.2 | (1.3) – 1.4 | (1.6) – 1.8 | (1.9) – 2.1 | (2.0) – 2.3 | (2.3) – 2.5 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 160 | (1.2) – 1.3 | (1.5) – 1.6 | (1.8) – 2.0 | (2.1) – 2.3 | (2.3) – 2.6 | (2.6) – 2.8 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 120 | (1.4) – 1.5 | (1.7) – 1.9 | (2.1) – 2.3 | (2.4) – 2.7 | (2.6) – 2.9 | (2.9) – 3.3 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 260 | (1.9) – 2.1 | (2.3) – 2.5 | (2.9) – 3.2 | (3.3) – 3.6 | (3.6) – 4.0 | (4.0) – 4.5 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 240 | (2.0) – 2.3 | (2.4) – 2.7 | (3.1) – 3.4 | (3.5) – 3.9 | (3.9) – 4.3 | (4.3) – 4.8 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 190 | (2.4) – 2.6 | (2.8) – 3.2 | (3.6) – 4.0 | (4.1) – 4.5 | (4.5) – 5.0 | (5.0) – 5.5 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 160 | (2.6) – 2.8 | (3.1) – 3.4 | (3.9) – 4.3 | (4.4) – 4.9 | (4.8) – 5.4 | (5.4) – 6.0 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 120 | (2.8) – 3.1 | (3.4) – 3.8 | (4.3) – 4.7 | (4.8) – 5.4 | (5.3) – 5.9 | (5.9) – 6.6 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 90 | (3.0) – 3.4 | (3.6) – 4.0 | (4.6) – 5.1 | (5.2) – 5.8 | (5.7) – 6.3 | (6.3) – 7.1 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 10 | 260 | (2.9) – 3.2 | (3.4) – 3.8 | (4.3) – 4.8 | (4.9) – 5.5 | (5.4) – 6.0 | (6.0) – 6.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 240 | (3.0) – 3.4 | (3.6) – 4.0 | (4.5) – 5.1 | (5.2) – 5.7 | (5.7) – 6.3 | (6.3) – 7.0 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 190 | (3.4) – 3.8 | (4.1) – 4.5 | (5.1) – 5.7 | (5.8) – 6.5 | (6.4) – 7.1 | (7.1) – 7.9 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 160 | (3.6) – 4.0 | (4.4) – 4.8 | (5.5) – 6.1 | (6.2) – 6.9 | (6.8) – 7.6 | (7.6) – 8.4 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 120 | (3.9) – 4.4 | (4.7) – 5.2 | (5.9) – 6.6 | (6.7) – 7.5 | (7.4) – 8.2 | (8.2) – 9.1 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 90 | (4.2) – 4.6 | (5.0) – 5.6 | (6.2) – 6.9 | (7.1) – 7.9 | (7.8) – 8.7 | (8.7) – 9.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 13 | 160 | (6.7) – 7.5 | (8.1) – 9.0 | (10.1) – 11.2 | (11.5) – 12.8 | (12.6) – 14.0 | (14.0) – 15.6 | 1.96 | 3.0 | G 1/4 – DN 6 * | 35 |
| 13 | 120 | (7.3) – 8.1 | (8.7) – 9.7 | (10.9) – 12.1 | (12.4) – 13.8 | (13.6) – 15.2 | (15.2) – 16.9 | 1.96 | 3.0 | G 1/4 – DN 6 * | 35 |
| 13 | 90 | (7.7) – 8.5 | (9.2) – 10.2 | (11.5) – 12.8 | (13.1) – 14.5 | (14.4) – 16.0 | (16.0) – 17.8 | 1.96 | 3.0 | G 1/4 – DN 6 * | 35 |
| 15 | 120 | (8.0) – 8.9 | (9.6) – 10.6 | (12.0) – 13.3 | (13.6) – 15.1 | (15.0) – 16.7 | (16.7) – 18.5 | 2.83 | 3.0 | G 1/4 – DN 6 * | 39 |
| 15 | 90 | (9.0) – 10.1 | (10.9) – 12.1 | (13.6) – 15.1 | (15.5) – 17.2 | (17.0) – 18.9 | (18.9) – 21.0 | 2.83 | 3.0 | G 1/4 – DN 6 * | 39 |
| 15 | 64 | (10.0) – 11.1 | (12.0) – 13.3 | (15.0) – 16.7 | (17.0) – 18.9 | (18.8) – 20.8 | (20.8) – 23.2 | 2.83 | 3.0 | G 1/4 – DN 6 * | 39 |
| 17 | 90 | (13.1) – 14.5 | (15.7) – 17.4 | (19.6) – 21.8 | (22.3) – 24.8 | (24.6) – 27.3 | (27.3) – 30.3 | 3.78 | 3.0 | G 1/4 – DN 6 * | 39 |
| 17 | 64 | (14.2) – 15.7 | (17.0) – 18.9 | (21.3) – 23.6 | (24.2) – 26.9 | (26.6) – 29.6 | (29.6) – 32.9 | 3.78 | 3.0 | G 1/4 – DN 6 * | 39 |
| 19 | 64 | (18.6) – 20.7 | (22.3) – 24.8 | (27.9) – 31.1 | (31.8) – 35.3 | (34.9) – 38.8 | (38.8) – 43.2 | 4.64 | 3.0 | G 1/4 – DN 6 * | 39 |
| 19 | 51 | (19.3) – 21.5 | (23.2) – 25.8 | (29.0) – 32.2 | (32.9) – 36.6 | (36.2) – 40.3 | (40.3) – 44.7 | 4.64 | 3.0 | G 1/4 – DN 6 * | 39 |
| 22 | 51 | (24.7) – 27.4 | (29.6) – 32.9 | (37.0) – 41.1 | (42.1) – 46.7 | (46.3) – 51.4 | (51.4) – 57.1 | 6.28 | 3.0 | G 1/4 – DN 10 | 46 |
| 22 | 30 | (27.0) – 30.0 | (32.4) – 36.0 | (40.5) – 45.0 | (46.0) – 51.1 | (50.6) – 56.2 | (56.2) – 62.5 | 6.28 | 3.0 | G 1/4 – DN 10 | 46 |
| 30 | 30 | (53.0) – 58.9 | (63.6) – 70.6 | (79.5) – 88.3 | (90) – 100 | (99) – 110 | (110) – 122 | 11.31 | 3.0 | G 1/4 – DN 10 | 46 |
Valve type: Double ball valve up to DN 6, single ball valve as of DN 10
Technical data for Evolution E1Sa single-head pump 60 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 113 | 136 | 170 | 193 | 213 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 6 | 260 | (0.9) – 1.0 | (1.1) – 1.3 | (1.4) – 1.6 | (1.6) – 1.8 | (1.8) – 2.0 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 240 | (1.1) – 1.2 | (1.3) – 1.4 | (1.6) – 1.7 | (1.8) – 2.0 | (2.0) – 2.2 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 190 | (1.3) – 1.5 | (1.6) – 1.8 | (2.0) – 2.2 | (2.3) – 2.5 | (2.5) – 2.8 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 160 | (1.5) – 1.6 | (1.8) – 2.0 | (2.2) – 2.5 | (2.5) – 2.8 | (2.8) – 3.1 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 6 | 120 | (1.7) – 1.9 | (2.0) – 2.3 | (2.6) – 2.9 | (2.9) – 3.3 | (3.2) – 3.6 | 0.49 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 260 | (2.3) – 2.6 | (2.8) – 3.1 | (3.5) – 3.9 | (4.0) – 4.4 | (4.4) – 4.9 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 240 | (2.5) – 2.8 | (3.0) – 3.3 | (3.7) – 4.2 | (4.3) – 4.7 | (4.7) – 5.2 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 190 | (2.9) – 3.2 | (3.5) – 3.9 | (4.3) – 4.8 | (4.9) – 5.5 | (5.4) – 6.0 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 160 | (3.1) – 3.5 | (3.8) – 4.2 | (4.7) – 5.2 | (5.3) – 5.9 | (5.9) – 6.5 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 120 | (3.4) – 3.8 | (4.1) – 4.6 | (5.2) – 5.8 | (5.9) – 6.6 | (6.5) – 7.2 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 8 | 90 | (3.7) – 4.1 | (4.4) – 4.9 | (5.5) – 6.2 | (6.3) – 7.0 | (6.9) – 7.7 | 0.80 | 3.0 | G 1/4 – DN 3 * | 31 |
| 10 | 260 | (3.5) – 3.9 | (4.2) – 4.7 | (5.2) – 5.8 | (6.0) – 6.6 | (6.6) – 7.3 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 240 | (3.7) – 4.1 | (4.4) – 4.9 | (5.5) – 6.1 | (6.3) – 7.0 | (6.9) – 7.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 190 | (4.1) – 4.6 | (5.0) – 5.5 | (6.2) – 6.9 | (7.1) – 7.9 | (7.8) – 8.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 160 | (4.4) – 4.9 | (5.3) – 5.9 | (6.6) – 7.4 | (7.5) – 8.4 | (8.3) – 9.2 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 120 | (4.8) – 5.3 | (5.7) – 6.4 | (7.2) – 8.0 | (8.2) – 9.1 | (9.0) – 10.0 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 10 | 90 | (5.1) – 5.6 | (6.1) – 6.7 | (7.6) – 8.4 | (8.6) – 9.6 | (9.5) – 10.6 | 1.25 | 3.0 | G 1/4 – DN 6 * | 35 |
| 13 | 160 | (8.2) – 9.2 | (9.8) – 10.9 | (12.3) – 13.6 | (13.9) – 15.5 | (15.3) – 17.1 | 1.96 | 3.0 | G 1/4 – DN 6 * | 35 |
| 13 | 120 | (8.8) – 9.8 | (10.6) – 11.8 | (13.2) – 14.7 | (15.1) – 16.7 | (16.6) – 18.4 | 1.96 | 3.0 | G 1/4 – DN 6 * | 35 |
| 13 | 90 | (9.3) – 10.3 | (11.2) – 12.4 | (14.0) – 15.5 | (15.9) – 17.7 | (17.5) – 19.4 | 1.96 | 3.0 | G 1/4 – DN 6 * | 35 |
| 15 | 120 | (9.7) – 10.8 | (11.6) – 12.9 | (14.6) – 16.2 | (16.6) – 18.4 | (18.2) – 20.2 | 2.83 | 3.0 | G 1/4 – DN 6 * | 39 |
| 15 | 90 | (11.0) – 12.2 | (13.2) – 14.7 | (16.5) – 18.4 | (18.8) – 20.9 | (20.7) – 23.0 | 2.83 | 3.0 | G 1/4 – DN 6 * | 39 |
| 15 | 64 | (12.1) – 13.5 | (14.6) – 16.2 | (18.2) – 20.3 | (20.7) – 23.0 | (22.8) – 25.3 | 2.83 | 3.0 | G 1/4 – DN 6 * | 39 |
| 17 | 90 | (15.9) – 17.7 | (19.1) – 21.2 | (23.9) – 26.5 | (27.1) – 30.1 | (29.8) – 33.1 | 3.78 | 3.0 | G 1/4 – DN 6 * | 39 |
| 17 | 64 | (17.2) – 19.1 | (20.7) – 23.0 | (25.8) – 28.7 | (29.4) – 32.6 | (32.3) – 35.9 | 3.78 | 3.0 | G 1/4 – DN 6 * | 39 |
| 19 | 64 | (22.6) – 25.1 | (27.1) – 30.2 | (33.9) – 37.7 | (38.6) – 42.9 | (42.4) – 47.2 | 4.64 | 3.0 | G 1/4 – DN 6 * | 39 |
| 19 | 51 | (23.3) – 25.8 | (27.9) – 31.0 | (34.9) – 38.8 | (39.7) – 44.1 | (43.6) – 48.5 | 4.64 | 3.0 | G 1/4 – DN 6 * | 39 |
| 22 | 51 | (29.9) – 33.3 | (35.9) – 39.9 | (44.9) – 49.9 | (51.1) – 56.8 | (56.2) – 62.4 | 6.28 | 3.0 | G 1/4 – DN 10 | 46 |
| 22 | 30 | (32.7) – 36.4 | (39.3) – 43.7 | (49.1) – 54.6 | (55.9) – 62.1 | (61.4) – 68.3 | 6.28 | 3.0 | G 1/4 – DN 10 | 46 |
| 30 | 30 | (64.3) – 71.5 | (77.2) – 85.8 | (96.5) – 107.2 | (109.7) – 121.9 | (120.6) – 134.1 | 11.31 | 3.0 | G 1/4 – DN 10 | 46 |
Valve type: Double ball valve up to DN 6, single ball valve as of DN 10
Wetted materials for Evolution E1Sa
| Identity code of material | Dosing head | Diaphragm/diaphragm mounting screw | Connection on suction/discharge side | Seals | Valve seats | Valve balls up to DN 10 |
|---|---|---|---|---|---|---|
| S2 | Stainless steel 1.4404 | PTFE / stainless steel 1.4462 | Stainless steel 1.4404 | stainless steel 1.4404 | Stainless steel 1.4404 | Al2O3 ceramic |
| S3 | Stainless steel 1.4404 | PTFE / stainless steel 1.4462 | Stainless steel 1.4404 | stainless steel 1.4404 | Stainless steel 1.4404 | Al2O3 ceramic |
Important note:
Abridged presentation of our complete product range. Other types on request
Motor data for EVOLUTION E1Sa single-head pump
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55 | 230 V/400 V | 50 Hz | 0.37 kW | With PTC, speed control range 1:5 |
| T | 3-phase, IP 55 | 230 V/400 V 265 V/460 V |
50 Hz 60 Hz |
0.37 kW | |
| L | 3-phase, IP 55, II 2G Ex de IIC T4 Gb | 230 V/400 V | 50 Hz | 0.37 kW | With PTC, speed control range 1:5 |
| V | 3-phase, IP 55 | 230 V | 50 Hz | 0.75 kW | Variable speed motor with integrated frequency converter |
ORLITA Evolution E2Sa
Technical data for Evolution E2Sa single-head pump 50 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 112 | 140 | 159 | 175 | 194 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 10 | 260 | (3.4) – 3.8 | (4.3) – 4.8 | (4.9) – 5.5 | (5.4) – 6.0 | (6.0) – 6.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 240 | (3.6) – 4.0 | (4.5) – 5.1 | (5.2) – 5.7 | (5.7) – 6.3 | (6.3) – 7.0 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 190 | (4.1) – 4.5 | (5.1) – 5.7 | (5.8) – 6.5 | (6.5) – 7.1 | (7.1) – 7.9 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 160 | (4.4) – 4.8 | (5.5) – 6.1 | (6.2) – 6.9 | (6.8) – 7.6 | (7.6) – 8.4 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 120 | (4.7) – 5.2 | (5.9) – 6.6 | (6.7) – 7.5 | (7.4) – 8.2 | (8.2) – 9.1 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 90 | (5.0) – 5.6 | (6.2) – 6.9 | (7.1) – 7.9 | (7.8) – 8.7 | (8.7) – 9.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 260 | (7.7) – 8.5 | (9.6) – 10.7 | (10.9) – 12.1 | (12.0) – 13.3 | (13.3) – 14.8 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 240 | (7.9) – 8.8 | (9.9) – 11.2 | (11.2) – 12.5 | (12.4) – 13.7 | (13.7) – 15.3 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 190 | (8.5) – 9.4 | (10.6) – 11.8 | (12.0) – 13.4 | (13.3) – 14.7 | (14.7) – 16.4 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 160 | (8.8) – 9.8 | (11.0) – 12.3 | (12.5) – 13.9 | (13.8) – 15.3 | (15.3) – 17.0 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 120 | (9.3) – 10.3 | (11.6) – 12.9 | (13.2) – 14.7 | (14.5) – 16.1 | (16.1) – 17.9 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 90 | (9.9) – 10.7 | (12.0) – 13.4 | (13.7) – 15.2 | (15.0) – 16.7 | (16.7) – 18.6 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 15 | 260 | (9.9) – 11.0 | (12.4) – 13.7 | (14.0) – 15.6 | (15.5) – 17.2 | (17.2) – 19.1 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 240 | (10.2) – 11.4 | (12.8) – 14.2 | (14.6) – 16.2 | (16.0) – 17.8 | (17.8) – 19.8 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 190 | (11.2) – 12.4 | (14.0) – 15.5 | (15.9) – 17.7 | (17.5) – 19.4 | (19.4) – 21.6 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 160 | (11.7) – 13.0 | (14.7) – 16.3 | (16.7) – 18.5 | (18.4) – 20.4 | (20.4) – 22.7 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 120 | (12.5) – 13.9 | (15.6) – 17.3 | (17.7) – 19.7 | (19.5) – 21.7 | (21.7) – 24.1 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 90 | (13.0) – 14.5 | (16.3) – 18.1 | (18.5) – 20.6 | (20.4) – 22.7 | (22.7) – 25.2 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 190 | (16.0) – 17.7 | (20.2) – 22.2 | (22.7) – 25.2 | (25.0) – 27.8 | (27.8) – 30.8 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 160 | (16.6) – 18.5 | (20.8) – 23.1 | (23.6) – 26.3 | (26.0) – 28.9 | (28.9) – 32.1 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 120 | (17.5) – 19.5 | (21.9) – 24.3 | (24.9) – 27.6 | (27.4) – 30.4 | (30.4) – 33.8 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 90 | (18.2) – 20.2 | (22.7) – 25.2 | (25.8) – 28.7 | (28.4) – 31.6 | (31.6) – 35.1 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 19 | 160 | (22.4) – 24.9 | (28.0) – 31.1 | (31.8) – 35.4 | (35.0) – 38.9 | (38.9) – 43.2 | 4.64 | 3.0 | G 1/4 – DN 6 * | 46 |
| 19 | 120 | (23.1) – 25.7 | (28.9) – 32.1 | (32.8) – 36.5 | (36.1) – 40.1 | (40.1) – 44.6 | 4.64 | 3.0 | G 1/4 – DN 6 * | 46 |
| 19 | 90 | (23.6) – 26.3 | (29.6) – 32.8 | (33.6) – 37.3 | (37.0) – 41.1 | (41.1) – 45.6 | 4.64 | 3.0 | G 1/4 – DN 6 * | 46 |
| 22 | 120 | (30.7) – 34.2 | (38.4) – 42.7 | (43.7) – 48.5 | (48.0) – 53.4 | (53.4) – 59.3 | 6.28 | 3.0 | G 1/4 – DN 10 | 52 |
| 22 | 90 | (32.1) – 35.7 | (40.1) – 44.6 | (45.6) – 50.7 | (50.2) – 55.7 | (55.7) – 61.9 | 6.28 | 3.0 | G 1/4 – DN 10 | 52 |
| 22 | 64 | (33.3) – 37.0 | (41.6) – 46.2 | (47.3) – 52.5 | (52.0) – 57.8 | (57.8) – 64.2 | 6.28 | 3.0 | G 1/4 – DN 10 | 52 |
| 30 | 64 | (60.1) – 66.8 | (75.2) – 83.6 | (85.5) – 95.0 | (94.0) – 104.5 | (104.5) – 116.1 | 11.31 | 3.0 | G 1/4 – DN 10 | 52 |
| 30 | 51 | (61.4) – 68.3 | (76.8) – 85.3 | (87.3) – 97.0 | (96.0) – 106.7 | (106.7) – 118.6 | 11.31 | 3.0 | G 1/4 – DN 10 | 52 |
Technical data for Evolution E2Sa single-head pump 60 Hz
| Plunger Ø | Max. pressure | Max. pump capacity in l/h at strokes/min | Theor. stroke volume | Suction lift | Connection on suction/discharge side | Shipping weight | ||||
|---|---|---|---|---|---|---|---|---|---|---|
| 113 | 136 | 170 | 193 | 213 | ||||||
| mm | bar | l/h | l/h | l/h | l/h | l/h | ml/stroke | m WC | G-DN | kg |
| * Double ball valve with female thread | ||||||||||
| 10 | 260 | (3.5) – 3.9 | (4.2) – 4.7 | (5.2) – 5.8 | (6.0) – 6.6 | (6.6) – 7.3 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 240 | (3.7) – 4.1 | (4.4) – 4.9 | (5.5) – 6.1 | (6.3) – 7.0 | (6.9) – 7.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 190 | (4.1) – 4.6 | (5.0) – 5.5 | (6.2) – 6.9 | (7.1) – 7.9 | (7.8) – 8.7 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 160 | (4.4) – 4.9 | (5.3) – 5.9 | (6.6) – 7.4 | (7.5) – 8.4 | (8.3) – 9.2 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 120 | (4.8) – 5.3 | (5.7) – 6.4 | (7.2) – 8.0 | (8.2) – 9.1 | (9.0) – 10.0 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 10 | 90 | (5.1) – 5.6 | (6.1) – 6.7 | (7.6) – 8.4 | (8.6) – 9.6 | (9.5) – 10.6 | 1.25 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 260 | (7.8) – 8.6 | (9.3) – 10.4 | (11.7) – 13.0 | (13.2) – 14.7 | (14.6) – 16.2 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 240 | (8.0) – 8.9 | (9.6) – 10.7 | (12.0) – 13.3 | (13.6) – 15.2 | (15.0) – 16.7 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 190 | (8.6) – 9.5 | (10.3) – 11.4 | (12.9) – 14.3 | (14.6) – 16.3 | (16.1) – 17.9 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 160 | (8.9) – 9.9 | (10.7) – 11.9 | (13.4) – 14.9 | (15.2) – 16.9 | (16.8) – 18.6 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 120 | (9.4) – 10.4 | (11.3) – 12.5 | (14.4) – 15.7 | (16.0) – 17.8 | (17.6) – 19.6 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 13 | 90 | (9.7) – 10.8 | (11.7) – 13.0 | (14.6) – 16.2 | (16.6) – 18.5 | (18.3) – 20.3 | 1.96 | 3.0 | G 1/4 – DN 6 * | 42 |
| 15 | 260 | (10.0) – 11.1 | (12.0) – 13.3 | (15.0) – 16.7 | (17.1) – 19.0 | (18.8) – 20.9 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 240 | (10.4) – 11.5 | (12.4) – 13.8 | (15.6) – 17.3 | (17.7) – 19.7 | (19.5) – 21.6 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 190 | (11.3) – 12.6 | (13.6) – 15.1 | (17.0) – 18.9 | (19.3) – 21.5 | (21.2) – 23.6 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 160 | (11.9) – 13.2 | (14.3) – 15.8 | (17.8) – 19.8 | (20.3) – 22.5 | (22.3) – 24.8 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 120 | (12.6) – 14.0 | (15.2) – 16.8 | (19.0) – 21.1 | (21.5) – 23.9 | (23.7) – 26.3 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 15 | 90 | (13.2) – 14.7 | (15.8) – 17.6 | (19.8) – 22.0 | (22.5) – 25.0 | (24.8) – 27.5 | 2.83 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 190 | (16.2) – 18.0 | (19.4) – 21.6 | (24.3) – 27.0 | (27.6) – 30.6 | (30.3) – 33.7 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 160 | (16.8) – 18.7 | (20.4) – 22.4 | (25.3) – 28.1 | (28.7) – 31.9 | (31.6) – 35.1 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 120 | (17.7) – 19.7 | (21.3) – 23.6 | (26.6) – 29.5 | (30.2) – 33.6 | (33.2) – 36.9 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 17 | 90 | (18.4) – 20.4 | (22.1) – 24.5 | (27.6) – 30.7 | (31.4) – 34.8 | (34.5) – 38.3 | 3.78 | 3.0 | G 1/4 – DN 6 * | 46 |
| 19 | 160 | (22.7) – 25.2 | (27.2) – 30.2 | (34.0) – 37.8 | (38.7) – 43.0 | (42.5) – 47.3 | 4.64 | 3.0 | G 1/4 – DN 6 * | 46 |
| 19 | 120 | (23.4) – 26.0 | (28.1) – 31.2 | (35.1) – 39.0 | (39.9) – 44.3 | (43.9) – 48.7 | 4.64 | 3.0 | G 1/4 – DN 6 * | 46 |
| 19 | 90 | (23.9) – 26.6 | (28.7) – 31.9 | (35.9) – 39.9 | (40.8) – 45.3 | (44.9) – 49.9 | 4.64 | 3.0 | G 1/4 – DN 6 * | 46 |
| 22 | 120 | (31.1) – 34.6 | (37.3) – 41.5 | (46.7) – 51.9 | (53.0) – 58.9 | (58.4) – 64.8 | 6.28 | 3.0 | G 1/4 – DN 10 | 52 |
| 22 | 90 | (32.5) – 36.1 | (39.0) – 43.3 | (48.7) – 54.1 | (55.4) – 61.5 | (60.9) – 67.7 | 6.28 | 3.0 | G 1/4 – DN 10 | 52 |
| 22 | 64 | (33.7) – 37.4 | (40.4) – 44.9 | (50.5) – 56.1 | (57.4) – 63.8 | (63.1) – 70.2 | 6.28 | 3.0 | G 1/4 – DN 10 | 52 |
| 30 | 64 | (60.9) – 67.6 | (73.0) – 81.2 | (91.3) – 101.5 | (103.8) – 115.3 | (114.2) – 126.9 | 11.31 | 3.0 | G 1/4 – DN 10 | 52 |
| 30 | 51 | (62.2) – 69.1 | (74.6) – 82.9 | (93.3) – 103.6 | (106.0) – 117.8 | (116.6) – 129.6 | 11.31 | 3.0 | G 1/4 – DN 10 | 52 |
Wetted materials for Evolution E2Sa
| Identity code of material | Dosing head | Diaphragm/diaphragm mounting screw | Connection on suction/discharge side | Seals | Valve seats | Valve balls up to DN 10 |
|---|---|---|---|---|---|---|
| S2 | Stainless steel 1.4404 | PTFE / stainless steel 1.4462 | Stainless steel 1.4404 | stainless steel 1.4404 | Stainless steel 1.4404 | Al2O3 ceramic |
Motor data for EVOLUTION E2Sa single-head pump
| Identity code specification | Power supply | Remarks | |||
| S | 3-phase, IP 55 | 230 V/400 V | 50 Hz | 0.75 kW | With PTC, speed control range 1:5 |
| T | 3-phase, IP 55 | 230 V/400 V 265 V/460 V |
50 Hz 60 Hz |
0.75 kW | |
| L | 3-phase, IP 55, II 2G Ex de IIC T4 Gb | 230 V/400 V | 50 Hz | 0.75 kW | With PTC, speed control range 1:5 |
| Q | 3-phase, IP 55, II 2G Ex de IIC T4 | 265 V/460 V | 60 Hz | 0.75 kW | With PTC, speed control range 1:5 |
| V | 3-phase, IP 55 | 230 V | 50 Hz | 0.75 kW | Variable speed motor with integrated frequency converter |
—-
>>> Xem thêm sản phẩm ProMinent
Tại Sao Chọn Medin Company?
Medin Company chuyên cung cấp các sản phẩm chính hãng chất lượng cao.
Với kinh nghiệm sâu rộng trong ngành, chúng tôi không chỉ cung cấp sản phẩm mà với đội ngũ kĩ sư giàu kinh nghiệm, chúng tôi còn mang đến giải pháp tối ưu cho khách hàng.
Medin Company đảm bảo:
- Sản phẩm chính hãng 100%
- Giá cả cạnh tranh nhất thị trường
- Bảo hành chính hãng toàn cầu
Dịch Vụ Dùng Thử Miễn Phí
- Test tại nhà máy khách hàng: Đánh giá hiệu suất thực tế
- Không phí phát sinh: Miễn phí hoàn toàn trong 30 ngày
- Cam kết hiệu quả: Đảm bảo tăng productivity tối thiểu 30%
Khảo Sát Tận Nơi
- Site survey chuyên nghiệp: Kỹ sư senior trực tiếp khảo sát
- Báo cáo chi tiết: Phân tích toàn diện điều kiện vận hành
- Tư vấn tối ưu: Giải pháp phù hợp 100% với nhu cầu
Hỗ Trợ Kỹ Thuật 24/7
- Hotline chuyên dụng: Phản hồi trong 15 phút
- Remote support: Hỗ trợ từ xa qua
- On-site service: Kỹ sư đến tận nơi trong 24h
Liên Hệ Medin Co., Ltd
- Công ty TNHH Mễ Đình được thành lập từ năm 2006.
- Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
- Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
- Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
- Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”
- Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
- Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.
