Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 – S1Cb – Bơm Định Lượng ProMinent

Capacity range S1Cb: 21 – 117 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

Danh mục: AUTOMATION, Motor-Driven Metering Pumps Bơm Định Lượng, ProMinent

Mô tả

Downloads

Motor-Driven Metering Pump Sigma X Control Type – Sigma/ 1 – S1Cb – Bơm Định Lượng ProMinent

Capacity range S1Cb: 21 – 117 l/h, 12 – 4 bar

The Sigma control type is a smart motor-driven metering pump that is setting new standards in terms of productivity, reliability and safety.

The new Sigma X range – reliable, smart and connectible

The Sigma X diaphragm metering pump covers a capacity range of 21 to 1,040 l/h in versions S1Cb, S2Cb and S3Cb. Its patented multi-layer safety diaphragm guarantees maximum process reliability. Efficient protection of the power end from overloading by means of an integral frequency converter with microprocessor control(ler).

One highlight is the standardised operating concept with click wheel and 4 additional operating keys on a removable operating unit. A large illuminated LCD and a 3-LED display for operating, warning and error messages, visible from all sides, offers additional operating convenience.

The Sigma, like all smart ProMinent metering pumps, can be flexibly connected to various bus systems.

It has a large adjustment range thanks to a combination of frequency and stroke length adjustment. The pump works with high precision across the entire frequency range. Accurate and complication-free metering of viscous and gaseous media by adjustment of the movement profile.

Operating statuses are simply remotely transmitted via an additional output or relay module. A built-in timer, included as standard, controls time-dependent metering cycles.

Relevant spare parts can be shown in the display. The integral logbook significantly improves process management, optimisation and troubleshooting.

Your benefits

Safe: In the event of an accident, the feed chemical does not escape to the outside nor into the pump’s power end, thanks to the patented multi-layer safety diaphragm with optical signalling (electrical as an option).
Integrated relief valve protects the pump against overloading and reliable operation by means of a bleed option during the metering process.
External control is scalable via potential-free contacts with pulse step-up and step-down, batch mode or via a 0/4-20 mA standard signal.
Can be flexibly networked: Connection to process management systems via integral PROFIBUS^®.
Integral log book saves up to 300 events and simplifies troubleshooting and analysis of the cause.

Field of application

The following list of applications are general examples of generally suitable applications for this product. Please contact your local sales representative to talk about the applicable use of this product in your specific case / environment.

All industrial applications, either as a stand-alone unit or integrated in a complete system
Volume-proportional addition of chemicals in water treatment, e.g. sodium hypochlorite for the disinfection of potable water
Neutralisation in wastewater treatment
Pulse-controlled metering in the bottling of different volumes e.g. glycerol filling of manometers
With an integrated timer as a control unit for simple processes, e.g. biocide metering in cooling water

Technical Details

Stroke length: 4 mm
Stroke length adjustment range: 0 – 100%
Stroke length adjustment: manually using self-locking rotary dial in 1 % increments
With the right, constant conditions, correct installation and calibration, precision exceeds ±1 %, based on maximum stroke volume.
Wetted materials: PVDF, stainless steel 1.4571/1.4404 (special materials on request)
Power supply: 1-phase, 100 – 230 V ±10%, 240 V ±6%, 50/60 Hz (110 W)
Degree of protection IP 65
Fibreglass-reinforced plastic housing
The liquid end on the left of the standard version can be selected for special installation situations or in combination with tanks, brackets etc.
Manual or external contact mode can be set, factor with external contact control 99:1 – 1:99; batch mode with max. 99,999 strokes/start pulse.
Metering profiles for optimum metering results.
Display of wear parts in the Service menu.
Connector for 2-stage level switch.
Connection to PROFINET using the ProMinent DULCOnvert PROFIBUS^®-PROFINET converter.
Various relay modules can be selected
Variants with EU 1935/2004, FDA or hygienic design can be selected for food and other applications. Hygienic design liquid ends are available for applications with stringent hygiene requirements.
Customised designs are available on request.

For reasons of safety, provide suitable overflow devices during installation for all mechanically deflected diaphragm metering pumps.

Technical Data

Type	Capacity at max. back pressure			Max. stroke rate	Pump capacity at max. back pressure		Suction lift	Perm. pre-pressure suction side	Connector Suction/Discharge Side	Shipping weight
S1Cb	l/h	bar	ml/stroke	Strokes/min	gph (US)	psi	m WC	bar	G-DN	kg
12017 PVT	21	10	3.8	90	5.5	145	7	1	3/4–10	9
12017 SST	21	12	3.8	90	5.5	174	7	1	3/4–10	12
12035 PVT	42	10	4.0	170	11.1	145	7	1	3/4–10	9
12035 SST	42	12	4.0	170	11.1	174	7	1	3/4–10	12
10050 PVT	49	10	4.0	200	12.9	145	7	1	3/4–10	9
10050 SST	49	10	4.0	200	12.9	145	7	1	3/4–10	12
10022 PVT	27	10	5.0	90	7.1	145	6	1	3/4–10	9
10022 SST	27	10	5.0	90	7.1	145	6	1	3/4–10	12
10044 PVT	53	10	5.1	170	14.0	145	6	1	3/4–10	9
10044 SST	53	10	5.1	170	14.0	145	6	1	3/4–10	12
07065 PVT	63	7	5.2	200	16.6	102	6	1	3/4–10	9
07065 SST	63	7	5.2	200	16.6	102	6	1	3/4–10	12
07042 PVT	52	7	9.5	90	13.7	102	3	1	1–15	10
07042 SST	52	7	9.5	90	13.7	102	3	1	1–15	14
04084 PVT	101	4	9.7	170	26.7	58	3	1	1–15	10
04084 SST	101	4	9.7	170	26.7	58	3	1	1–15	14
04120 PVT	117	4	9.7	200	30.9	58	3	1	1–15	10
04120 SST	117	4	9.7	200	30.9	58	3	1	1–15	14

Integrated relief valve, connector for DN 10 pressure hose sleeve

Materials in Contact with the Medium

Identity code of material	Dosing head	Connection on suction/discharge side	Seals/ball seat	Balls	Integral relief valve
PVT	PVDF	PVDF	PTFE/PTFE	Ceramic	PVDF/FKM or EPDM
SST	Stainless steel 1.4404	Stainless steel 1.4581	PTFE/PTFE	Stainless steel 1.4404	Stainless steel/FKM or EPDM
PVF	PVDF	PVDF	PTFE/PTFE	Ceramic	PVDF/FKM or EPDM
SSF	Stainless steel 1.4404	Stainless steel 1.4581	PTFE/PTFE	Stainless steel 1.4404	Stainless steel/FKM or EPDM
SSG	Stainless steel 1.4404	Stainless steel 1.4581	PTFE/stainless steel 1.4404	Stainless steel 1.4404	–
SSH	Stainless steel 1.4435	Stainless steel 1.4435	EPDM or FKM/stainless steel 1.4435	Ceramic	–

Motor Data

Identity code specification		Power supply			Remarks
U	1-phase, IP 65	100 – 230 V ±10 % / 240 V ±6 %	50/60 Hz	110 W	Wide-range voltage power unit

Motors less than 0.75 kW and motors designed for speed-controllable operation are not subject to the IE3 standard in compliance with the Ecodesign Directive 2009/125/EC.

—-

>>> Xem thêm sản phẩm ProMinent

Tại Sao Chọn Medin Company?

Medin Company chuyên cung cấp các sản phẩm chính hãng chất lượng cao.

Với kinh nghiệm sâu rộng trong ngành, chúng tôi không chỉ cung cấp sản phẩm mà với đội ngũ kĩ sư giàu kinh nghiệm, chúng tôi còn mang đến giải pháp tối ưu cho khách hàng.

Medin Company đảm bảo:

Sản phẩm chính hãng 100%
Giá cả cạnh tranh nhất thị trường
Bảo hành chính hãng toàn cầu

Dịch Vụ Dùng Thử Miễn Phí

Test tại nhà máy khách hàng: Đánh giá hiệu suất thực tế
Không phí phát sinh: Miễn phí hoàn toàn trong 30 ngày
Cam kết hiệu quả: Đảm bảo tăng productivity tối thiểu 30%

Khảo Sát Tận Nơi

Site survey chuyên nghiệp: Kỹ sư senior trực tiếp khảo sát
Báo cáo chi tiết: Phân tích toàn diện điều kiện vận hành
Tư vấn tối ưu: Giải pháp phù hợp 100% với nhu cầu

Hỗ Trợ Kỹ Thuật 24/7

Hotline chuyên dụng: Phản hồi trong 15 phút
Remote support: Hỗ trợ từ xa qua
On-site service: Kỹ sư đến tận nơi trong 24h

Liên Hệ Medin Co., Ltd

Công ty TNHH Mễ Đình được thành lập từ năm 2006.
Từ đó đến nay Medin luôn là Công ty dẫn đầu về lĩnh vực Tự Động Hoá ở thị trường trong và ngoài nước với hơn 1,000 khách hàng, cùng với rất nhiều dự án lớn nhỏ cho các nhà máy sản xuất.
Chúng tôi cung cấp cho khách hàng những giải phát tuyệt vời nhất trong việc ứng dụng Tự Động Hoá vào sản xuất
Phương châm: “Giải pháp của chúng tôi, lợi ích của khách hàng”
Giá trị cốt lõi: “Uy tín là sự tồn tại của chúng tôi”

Hơn 20 năm kinh nghiệm, chúng tôi có đội ngũ kỹ sư nhiều kinh nghiệm, có khả năng tư vấn, đưa ra giải pháp có lợi nhất cho khách hàng.
Sự tin tưởng và đồng hành của khách hàng là động lực để Medin phát triển cao hơn và xa hơn.

👉 Nếu bạn có bất kỳ yêu cầu nào, vui lòng liên hệ với chúng tôi.

☎️ Hotline: 0902782082

3 Chi nhánh tại HCM, HN, Đà Nẵng