Downloads
Product features
- Powerful fume extraction unit purifies air at up to 8 workplaces
- Equipped with HEPA H13 particle filter and Fine dust pre-filter F7
- The Constant Flow Control (CFC) guarantees optimal air flow regulation for each working place independent of the connected workplaces
- 3 operating modes:Standard Speed Control: Selected by the user irrespective of the load on the system,Speed Limiting Control: The speed is automatically varied to match the load on the system,
Economy Control: The rate of fume absorption is maintained at a constant value
- Electronic filter control with optical and acoustical filter alarm
- Low noise emission levels for a quiet workspace
- RS232 port, can be remotely controlled via remote control (optional accessory) or by a PC with RS232 connection
- Max. blower capacity 615 m³/h
- Efficiency test via USB port
Technical data
Dimensions L x W x H | 18.1 x 18.1 x 26.1 in |
Capacity (m³/h) | 615 m³/h |
Compact Filter | Particle filter H13, broadband gas filter (50% activated carbon + 50% Chemisorb) |
Compatible Nozzle | WX WT |
ESD Safe | Yes |
Fuse | T3.15A |
Maximum Blower Vacuum (Pa) | 3,000 Pa |
Maximum Capacity | 1–8 Workstations |
Maximum Vacuum | 2,800 Pa |
Power | 460 VA |
UPC | 037103310804 |
USB | The USB port can be used to load firmware updates, run efficiency tests and log data. Do not leave the USB medium inserted for longer than 2 minutes. After this time expires, the USB module will switch off automatically. |